RSS export of vacancies - Only featured vacancies : No / Profession : Senior Executive / BU Management, Information Technology / Telecommunication, Installation & worksite

2026-45268 - Operations Director H/F

Mon, 09 Nov 2026 14:15:57 Z

Contract type : International Contract
Position description :
The Operation Director / Contract Manager is responsible for the following activities: Contract Management & Delivery • Ensure full execution of the O&M contract in line with contractual obligations and performance requirements. • Manage contract deliverables including resources, materials, services, and reporting. • Identify, prepare, and manage contract amendments, variations, and claims. Operations & Performance Management • Lead and coordinate all plant operations to ensure safe, reliable, and efficient production. • Monitor and drive performance through KPIs, reporting, and continuous improvement initiatives. • Ensure alignment of operations with production targets, quality requirements, and HSE standards. Financial & Commercial Management • Manage contract financial performance including budget, cost control, and profitability. • Prepare and monitor annual budgets and financial forecasts. • Implement cost optimization strategies while maintaining operational excellence. Human Resources & Organization • Manage and supervise all O&M personnel and organizational structure. • Oversee recruitment, mobilization, and workforce planning. • Ensure competency development and effective team performance. HSE & Compliance • Ensure strict compliance with HSE policies, procedures, and regulatory requirements. • Promote a strong safety culture across the organization. • Ensure operations comply with local laws, international standards, and contractual obligations. Stakeholder & Client Management • Act as the main interface with the Client (Employer), partners, and stakeholders. • Ensure high level of customer satisfaction and relationship management. • Coordinate with internal and external stakeholders to ensure alignment. Risk Management & Continuous Improvement • Identify and manage operational, contractual, financial, and HSE risks. • Implement mitigation strategies and corrective actions. • Drive continuous improvement across operations, maintenance, and support functions. CONTRACT TERMS & MOBILITY ⦁ Local employment contract within an international group entity or freelance contract, depending on profile. ⦁ Preparation phase: fully remote, with missions to Cergy (France) and occasional overseas assignments at contract start. ⦁ Phases 2-3: based in Türkiye on a resident or rotational basis. ⦁ Eligible expatriate assignments include company support for accommodation, travel, local transportation and meals, in accordance with company policies.

Hard Skills: Strong knowledge of contract management and O&M service delivery. Experience in plant operations, maintenance, and industrial processes. Good understanding of financial management, budgeting, and cost control. Ability to manage KPIs, reporting, and performance monitoring. Strong knowledge of HSE management systems and compliance requirements. Experience in risk management and mitigation strategies. Ability to manage multidisciplinary teams and subcontractors. Strong understanding of procurement, logistics, and resource planning. Soft Skills: Leadership & Team Development: Leads multidisciplinary teams, coaches talent, and promotes accountability. Strategic Decision-Making: Aligns timely decisions with business, operational, and contractual objectives. Communication & Collaboration: Communicates clearly, manages conflicts, and engages stakeholders effectively. Problem-Solving & Improvement: Resolves root causes and drives practical, sustainable improvements. Adaptability & Change: Leads change with resilience in dynamic, multicultural environments. Integrity: Acts ethically and takes ownership of decisions. Experience: Minimum 10–15 years of experience in oil & gas, petrochemical, or industrial operations. At least 5–7 years in senior management roles (contract management, operations leadership, or plant management). Proven experience in O&M contract execution and management is mandatory. Education: Master’s degree or equivalent in Engineering (Mechanical, Chemical, Industrial, etc.).Advanced degree or certifications in project management, contract management, or business administration are an advantage.
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-43720 - Apprenti Data Ingénieur H/F

Tue, 20 Oct 2026 22:09:44 Z

Contract type : Apprenticeship agreement / contract
Position description :
· Concevoir et développer des scripts ou des outils pour intégrer, transformer et transférer des données entre systèmes (ERP, outils RH, finance…). · Automatiser les traitements récurrents : extractions, consolidations, mises à jour de données. · Veiller à la sécurisation des échanges de données (authentification, gestion des accès, traçabilité via logs). · Participer à la création de tableaux de bord et de visualisations

• Étudiant en formation de Bac+3 à Bac+5 (BUT, Licence, Master, école d’ingénieur), avec une spécialisation en développement informatique ou data engineering. • Bonnes bases en développement backend (Java, Python, Node.js ou autre langage serveur). • Connaissances en manipulation de données SQL, API REST, formats JSON/XML et outils de versioning (Git). • Rigueur, autonomie, esprit d’analyse, et goût pour le travail technique.
Location : 10 Avenue de l'Entreprise, 95800 Cergy, France
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : B-Limited working proficiency

2026-45056 - ICSS/PLC Specialist H/F M/F

Fri, 16 Oct 2026 10:14:31 Z

Contract type : Permanent contract
Position description :
Purpose Is responsible for integrity and follow-up of software and hardware for ICSS and interfaces with PLC's. He ensures that maintenance operations under his responsibility are carried out in strict accordance with TEPDK’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by NorSPIE. Ensures that all requirements expressed in the GS EP INS 135 are applied. He takes all necessary measures to ensure compliance with the maintenance schedule for the equipment under his responsibility. He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. HSE: Ensures that TEPDK’s HSE regulations are respected (especially procedures related to control of Work), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Have a good understanding of TEPDK HSE rules. Ensures that the team under his responsibility understands the group policies and applies them. Writes on a daily basic risks analysis for specific intervention. Advice while permit to work redaction, the specific trade measures to establish and ensures tools adequacy. Ensures that employees under his responsibility have the required qualification. Participate to safety talk before and after intervention. Participates to key procedure audits in proactive manner. Respects the waste management policy in force on site, verifying that all activities performed under his own responsibility, comply it, without any exceptions.

Experienced professional in ICSS, automatism Good knowledge of networks and Cybersecurity, dedicated training proof is a plus. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent and independent in his field, Must show common sense, organization ability and proven sense of responsibility. He must be able to anticipate and analyze situations.
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-45055 - Onshore Work Permit Preparator M/F

Fri, 16 Oct 2026 10:09:55 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION: · Prepare and coordinate Work Permit (WP) packages for offshore maintenance team. · Ensure all permits are prepared in accordance with COMPANY rules, procedures. · Verify technical documentation, risk assessments, isolation requirements, drawings, and supporting documents required for permit approval. · Coordinate with planners, technical asset lead and preparators to ensure work scopes are adequately prepared. · Support offshore teams during permit execution and resolve technical or administrative permit-related issues. · Participate in continuous improvement initiatives related to work preparation and permit processes. HSE: · Establish and maintain a strong safety culture in line with Company HSE requirements and Life-Saving Rules. · Ensure all work permits comply with COMPANY permit-to-work procedures and approved operating practices. · Verify that all hazards, control measures, isolations, and risk assessments are clearly identified and documented. · Ensure simultaneous operations (SIMOPS) risks are considered during permit preparation. · Promote process safety, operational safety, and asset integrity through rigorous preparation and review of work permits. Participate in incident investigations and implementation of corrective actions related to permit-to-work activities when required. MAIN FUNCTIONS: · Prepare work permits for corrective, preventive-related activities. · Review work orders and ensure required technical documentation is available before permit issuance. · Verify that Job Hazard Analyses (JHA), risk assessments, and isolation certificates are completed and attached. · Coordinate with offshore maintenance team to obtain permit approvals. · Ensure permits are prepared in accordance with work priorities and operational constraints. · Support weekly planning meetings and permit review meetings. · Maintain permit records and ensure documentation remains traceable and auditable. · Coordinate with offshore supervisors to ensure efficient work execution. · Contribute to KPI reporting related to preparation performance. Identify and propose improvements to permit preparation processes and work management systems.

· Technical diploma or equivalent in Mechanical, Electrical, Instrumentation, Process, or Maintenance disciplines. · Minimum 6 years' experience in industrial maintenance, including experience in the oil and gas industry. · Significant experience with Permit-to-Work systems and maintenance preparation activities. · Good knowledge of HSE management systems and risk assessment methodologies. · Experience with CMMS systems (SAP preferred). · Good understanding of offshore operational constraints and maintenance processes. · Strong organizational and coordination skills. · Ability to work effectively within a multidisciplinary and multinational team. · Rigorous, methodical, and proactive approach. Good communication skills and ability to manage multiple priorities simultaneously.
Location : Kanalen 1, Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-44683 - Instrument Tubing Fitter M/F

Sat, 10 Oct 2026 22:13:05 Z

Contract type : Temporary work contract
Position description :
SPIE Global Services Energy is looking for Instrument Tubing Fitter to join its workforce on BONGA Offshore Project in Lagos Nigeria. Interpret and work from P&IDs, tubing hook-up drawings, instrument installation drawings, isometric drawings, layouts, and construction specifications. Install, route, support, and terminate instrument tubing for pressure, temperature, level, flow, control and other instrumentation systems. Carry out installation of stainless steel, copper, carbon steel and other specified tubing materials in accordance with project specifications. Fabricate tubing runs by accurately measuring, cutting, bending, forming and assembling tubing to suit approved drawings and site conditions. Install and connect tube fittings, compression fittings, ferrule fittings, bulkhead fittings, manifolds, valves, needle valves, check valves and associated accessories. Perform tubing installation between instruments, impulse lines, manifolds, process connection points, control valves and junction/interface points. Ensure correct tubing routing, including proper slope, accessibility, clearance, supports, separation and protection against mechanical damage. Install tubing supports, clamps, brackets and mounting accessories in accordance with approved drawings and engineering requirements. Ensure tubing is correctly identified using tag numbers, line numbers, service identification and instrument references. Carry out tubing installation for instrument air, process impulse, pneumatic control, hydraulic and other utility services as specified in the project scope. Conduct tubing preparation activities including deburring, cleaning, flushing and protection of tube ends before connection. Ensure all tubing connections are properly assembled and tightened using the correct tools, torque requirements and manufacturer's installation procedures. Carry out leak testing, pressure testing, pneumatic testing and/or hydrostatic testing of tubing systems as required by approved procedures. Identify and rectify tubing installation defects such as leaks, incorrect routing, damaged tubing, loose fittings, improper bending or inadequate supports. Coordinate with Instrument Fitters, Instrument Technicians, Pipe Fitters, Welders, Electrical Technicians and other construction disciplines to resolve interface issues. Verify installed tubing against approved drawings, material specifications, instrument hook-up drawings and project standards before inspection. Assist QA/QC QHSE Ensures HSE policy fulfilment during his activities Maintains a strong safety culture in line with Company HSE Requirements and Rules Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Management System, including permit-to-work (PTW) procedures, SIMOPS, tool box talks, and job hazard analyses (JHA). He/she shall immediately address and report any unsafe acts or conditions in the work area

QUALIFICATIONS & EXPERIENCE Education: Minimum HND or B.Sc. in in Electrical Engineering, Electrical/Electronics Technology, or a related technical discipline. Equivalent vocational training with relevant field experience will be considered Experience: Minimum of 8–10 years of hands-on experience in electrical construction on oil and gas EPC projects, with at least 4–5 years in a supervisory role specifically covering cable tray installation and cable routing. Experience on offshore platforms, FPSOs, or Deepwater projects is a strong advantage. Technical Competencies: Instrument tubing installation and fabrication Tube bending (Autoclave & Swageloks) and routing Compression fitting installation Instrument hook-up Stainless-steel tubing work Pneumatic and hydraulic tubing Pressure/leak testing Reading P&IDs and instrument hook-up drawings Tubing support installation Oil & Gas construction practices QA/QC inspection requirements Permit-to-Work and HSE compliance Ability to work at height and in confined/offshore environments where required Team coordination and productivity control Certifications (Preferred): CompEx or equivalent hazardous area certification Working at Height certificationConfined Space Entry
Location : BONGA (Offshore)
Language / Level :
English : C-Professional working proficiency

2026-44679 - Cable Pulling Technician M/F

Sat, 10 Oct 2026 22:13:03 Z

Contract type : Temporary work contract
Position description :
SPIE Global Services Energy is looking for E&I Cable Pulling Tech to join its workforce on BONGA Offshore Project in Lagos Nigeria. Read and interpret cable schedules, cable routing layouts, termination drawings, wiring diagrams, P&IDs, tray layouts and installation specifications. Carry out cable pulling and installation activities for power, control, instrumentation, telecom, fiber-optic, fire alarm, CCTV and other ELV cables as assigned. Verify cable routes, tray availability, conduits, ducts and cable trenches before commencing cable-pulling activities. Inspect cable drums and verify cable type, size, length, drum number, tag number and destination against approved cable schedules. Set up cable drums, rollers, cable socks, pulling ropes, winches and other equipment required for safe and controlled cable installation. Perform manual and mechanical cable pulling while maintaining the manufacturer's specified maximum pulling tension, bending radius and installation requirements. Ensure cables are properly supported and arranged on cable trays, ladders, conduits, ducts, trenches and underground routes. Maintain proper cable separation between power, control, instrumentation, communication and intrinsically safe circuits in accordance with project requirements. Ensure cables are not damaged during installation and immediately report any cuts, crushing, excessive bending, sheath damage or other defects. Install cables with adequate slack at equipment, junction boxes, panels, marshalling cabinets and termination points to facilitate proper termination. Maintain correct cable identification by installing cable tags, markers, ferrules and destination labels at specified locations. Dress, arrange and secure installed cables using approved cable ties, cleats, clamps, straps and other cable-management materials. Ensure cables are installed neatly and maintain proper routing, spacing, accessibility and workmanship standards. Assist electricians and instrument technicians with cable preparation activities, including cable stripping, gland preparation and routing to termination points, within the technician's authorized scope. Assist with installation of cables through conduits, cable trays, ladders, underground ducts and cable trenches, including difficult or congested areas. Carry out cable pulling in accordance with approved Method Statements, Job Safety Analysis (JSA), Risk Assessments and Permit-to-Work (PTW) requirements. Conduct pre-pulling inspections QHSE Ensures HSE policy fulfilment during his activities Maintains a strong safety culture in line with Company HSE Requirements and Rules Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Management System, including permit-to-work (PTW) procedures, SIMOPS, tool box talks, and job hazard analyses (JHA). He/she shall immediately address and report any unsafe acts or conditions in the work area

QUALIFICATIONS & EXPERIENCE Education: Minimum HND or B.Sc. in in Electrical Engineering, Electrical/Electronics Technology, or a related technical discipline. Equivalent vocational training with relevant field experience will be considered Experience: Minimum of 8–10 years of hands-on experience in electrical construction on oil and gas EPC projects, with at least 4–5 years in a supervisory role specifically covering cable tray installation and cable routing. Experience on offshore platforms, FPSOs, or Deepwater projects is a strong advantage. Technical Competencies: Cable pulling and installation Cable drum handling and management Cable tray and ladder installation interface Cable routing and dressing Power and control cable installation Instrumentation and telecom cable installation Fiber-optic cable handling awareness Cable identification and tagging Cable pulling tension and bending-radius control Cable cleating and securing Reading cable schedules and installation drawings Cable testing awareness Hazardous-area work practices PTW, JSA and HSE compliance QA/QC inspection and punch-list clearance Certifications (Preferred): CompEx or equivalent hazardous area certification Working at Height certificationConfined Space Entry
Location : BONGA (Offshore)
Language / Level :
English : C-Professional working proficiency

2026-44780 - Subsea Production Engineering M/F

Sat, 26 Sep 2026 22:20:09 Z

Contract type : International Contract
Position description :
SPIE Global Services Energy is currently looking for Subsea Production Engineering to join its workforce here in Angola. Key Responsibilities: Subsea Operations Ensure with all involved entities that subsea interventions are well planned and prepared. Identification of SIMOPS related to subsea operations. Follow-up of the production & maintenance related operations (onshore preparation, logistic, equipment/tooling/personal mob/demob, etc.) in liaison with Operating departments and ITV for the operational Optimisation of SIMOPS. Engineering Studies Definition of the scope of work and participate to engineering studies related to the improvement or the correction of subsea equipment. Validation of the studies and the repaired/modified equipment. Proposition of improvement to operating issues. Proposition of methods or means to reduce cost and optimise resources. Contribution to the realisation of modification/improvement. Main Repairs/Modifications Follow-up Contribution to define the scope of the project and more specifically review with Operating Departments and DT/ITV the operability and the maintainability of the proposed sub-sea facilities. Validation as required operating philosophy of the project. Participation to the project start-up phase in liaison with the respective Operating Departments. Management Contribution to the budget building. Development of junior engineers. Contribution to the integration of the DB17 future developments by providing comprehensive REX. Participation to internal and international conference on Subsea and prepare papers accordingly.

Experience & Background Subsea engineering degree in Chemical/Petroleum or equivalent. Minimum 5 years' experience in oil and gas process/production, project construction/management, preferably in a deep offshore environment. Excellent multi-discipline technical background to be able to participate actively in the evaluation of operational issues and their possible solutions. Knowledge of onshore/offshore process and production systems, well performance, well integrity, operations and project management. Leadership & Collaborative working relationships with offshore.
Location : Luanda
Language / Level :
English : C-Professional working proficiency

2026-43063 - Chef de Chantier Turbines

Wed, 22 Jul 2026 22:09:17 Z

Contract type : Permanent contract
Position description :
MISSIONS: Réaliser, organiser et suivre les chantiers de machines tournantes, turbines ou auxiliaires dans le respect en termes de coût, qualité, délai. Il supervise une équipe de chef d'équipe et/ou de monteur mécanicien. Prendre en charge le matériel o Réaliser/s’assurer/valider l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées o Identifier/s’assurer/valider les pièces et les sous-ensembles et de leur stockage approprié o S'assurer/valider que l'ensemble des pièces et sous-ensembles sont disponibles Démonter et expertiser o Réaliser/s’assurer/valider le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles o Réaliser/s’assurer/valider le nettoyage approprié des pièces et des sous-ensembles o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique / des jeux fonctionnels o Identifier/s’assurer/valider les pièces à réparer ou à remplacer o Renseigner le compte rendu d’évaluation et proposer au pilote de l’affaire réparations à effectuer. Remettre en état et remonter le matériel o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique des pièces neuves ou réparées o Réaliser/s’assurer/valider le contrôle des jeux fonctionnels en cours de remontage o Réaliser/s’assurer/valider les opérations d’ajustage / montage / les opérations simples de tuyauterie et chaudronnerie / les travaux par point chaud (soudure, montage par dilatation thermique…) Opérations de réglage (sur chantier) o Réaliser/s’assurer/valider les opérations de réglage (lignage des internes d’une turbine, alignement machines, pesage de corps,…) Traçabilité des opérations o Remplir/s’assurer/valider les feuilles de contrôle associés aux opérations de maintenance effectuées o Participer/rédiger/valider les divers rapports et procès-verbaux (partie constat au minimum) et le faire signer au client o Proposer des solutions au pilote d’affaire o Renseigner et valider le Plan Qualité Affaire et/ou gamme Piloter l’activité o Valider et signer le PDP o Signer le PV d'ouverture de chantier et envoyer au pilote* d'affaire o Veiller à l'exécution des travaux attribués par pilote* d’affaire conformément au planning o Informer quotidiennement le pilote* d’affaire de l'avancement du chantier et émettre des rapports journaliers.... Assister lors de la mise en service (sur chantier) Assurer la gestion et l’animation des ressources (moyens humains, matériel et technique)

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative Savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : D-Full professional proficiency

2026-43605 - INSTRUMENT SENIOR TECHNICIAN M/F

Fri, 05 Jun 2026 05:44:09 Z

Contract type : Permanent contract
Position description :
HSE: · Ensures that COMPANY’s HSE rules and regulations are strictly observed, (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during the performance of maintenance operations placed under his/her responsibility. · Establishes and maintains a strong safety culture in line with TotalEnergies’ HSE requirements and rules. · Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (If required) · Update his technical documentation. · Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about any HSE issues and proposing corrective solutions. · Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause Failure Analyses, Process Incidents audits and other activities as required; Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) · Ensure validity of work permit relevant to the work scope before handling a task. · Checks and verifies that mandatory aspects (including those concerning local law scenarios) are properly implemented for all activities conducted, METHODS · Contribute to relevant kick of meeting related to maintenance operation. · Keeps a critical eye on current preventive maintenance programs and, suggests improvements if required, · Identifies recurrent corrective maintenance interventions, analyses them, and suggests improvements, OPERATION · Organises and performs on site the maintenance operations which are placed under his/her responsibility, · With his/her teams, assists specialists working under Specific Maintenance Contracts (SMC), · Monitors the functioning of systems placed under his/her responsibility, · Ensures that the transfer of knowledge by mentoring occurs properly within his/her teams, and actively · Manages the team of technicians directly under his/her responsibility, · Performs any intervention within his/her field of competence at the request of the CSR. · Takes in charge the systems under his/her responsibility in case of breakdown, until correct operation status resumes. INSTRUMENT SENIOR TECHNICIAN SPECIFIC · Must have advanced technical knowledge of all types of Instrumentation, Process Control, Fiscal Oil & Gas Metering, Fire & Gas and ESD safety systems. · In addition to the duties of an Instrument technician, is also responsible for Level 1,2,3 servicing, maintenance and testing of the above equipment as per the CMIMS – UNSIOL system. · DUCSAT offshore operations are normally 24hr. Day shift 12 hours / Nightshift 12 hours to maximise ‘tool time’.

A basic knowledge of the process of oil and gas operations & installations and a thorough knowledge of the equipment used in oil and gas operations & installations. The Ability to lead and motivate multi-national teams. Pride in his/her work, ability to maintain good relations with colleagues and others. Physically ability to work on offshore installations in the climatic conditions of the site. He/she must have proven ability as a leader of small teams. Perfectly competent and independent in his/her field, he/she must show common sense and organisational ability. Natural authority, founded on his/her abilities and on the trust he/she has in his/her teams, is essential
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43599 - ELECTRICAL TECHNICIAN M/F

Thu, 04 Jun 2026 14:30:27 Z

Contract type : Permanent contract
Position description :
HSE: Ensure HSE policy fulfillment during his activities. Establishes and maintain a strong safety culture in line with TotalEnergies’ HSE requirements and rules. Complies with HSE Legislation (Occupational and process), TotalEnergies’ standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude. Complies with Operating Procedures and Guidelines with the asset to ensure process safety, operational safety, and plan integrity. Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specifics ones (If required) Report anomalies, accidents, near misses Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) Check validity of work permit relevant to work scope before handling a task. Checks and verifies that mandatory aspects (including those concerning local law scenario) Participate to safety talk before and after intervention. Participate to key procedure audits And for Electricity in particular: Knowledge of electrical Certification requirements and be certified as required. Be aware of permit to work and electrical isolations requirements. Be aware of gas test requirement. Understand hazards associated to leak tests and hydrotests. THEORICAL KNOWLEDGE Have a basic understanding of facilities/process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia…). Understanding and use of basic laws and units of physic (resistance, inductance, DC & AC current and voltage, frequency, active and reactive power…). Be able to differentiate low and high voltages. Possess notions on cable sizing and voltage dropping. Be able familiar with a general facilities electrical network philosophy Have a basic understanding of inter-tripping and interlocking action, load shedding and load sharing modes. For electrician technicians only, have a basic understating of cathodic protection system. Understand working principle of main electrical equipment For those, be aware of their preventive maintenance requirements. Be aware of CBM (thermography) requirement and purpose. Understand principles and know the different systems of earthing Understand preventive, corrective maintenance and maintenance plan concepts. OPERATION Be able to maintain and troubleshoot small electrical installation like lighting and heat tracing circuit. Be able to identify the different types of cables (including ground ones) connect those properly (using lugs) and perform their proper laying Be able to do preventive maintenance on non-critical equipment LV Electrical equipment: - Be able to dismantle, replace defective parts, reassemble, reconnect, and check the system. - Identify all accessories - Identify correctly for other people risks generated by his activity.

Perfectly competent and independent in his field specially: Must show common sense, organization ability and responsibility. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Rigorous and methodical in his approach to operation and able to anticipate and analyze situation. Able to complete mechanical preventive and corrective maintenance according to planning and instructions.
Location : OFFSHORE
Language / Level :
English : C-Professional working proficiency

2026-43593 - CRANE PREPARATION ENGINEER (onshore) M/F

Thu, 04 Jun 2026 12:35:36 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Gives his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all Cranes subject under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs’, Preparations, Backlog Control Planning and Equipment availability/reliability • Take charge of Cranes Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations and planning. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved Crane WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Mechanical Preparations – Team Lead for clarifications where required.

Technical Preparation and Site Support
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43592 - INSTRUMENTATION PREPARATOR (Onshore) M/F

Thu, 04 Jun 2026 12:33:30 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all INSTRUMENT & TELECOMMS Preparations subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to Client’s Company rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability Take charge of Work Orders under His/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the TEPDK to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Technical Preparations and Site Support
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43591 - INSTRUMENTATION ENGINEER (onshore) M/F

Thu, 04 Jun 2026 12:31:54 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all INSTRUMENT & TELECOMMS Preparations subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to Client’s Company rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability • Take charge of Work Orders under His/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the TEPDK to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required

Experience in INSTRUMENT/TELECOMMS Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), Evision permit Systems and other Preparations, Tools/Resources.
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43590 - ELECTRICAL/HVAC TECHNICIAN (onshore) M/F

Thu, 04 Jun 2026 12:30:14 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all ELECTRICAL & HVAC preparation subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability. Take charge of Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparation standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Experience in ELECTRICAL Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), E-vision permit Systems and other Preparations, Tools/Resources.
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43452 - ELECTRICAL REFERENT M/F

Thu, 28 May 2026 13:32:11 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION: • The Electrical Referent is the technical and compliance authority for all electrical activities within the scope of the contract. • He/she is responsible for ensuring that all electrical works are executed in full compliance with: • Client electrical procedures and requirements • NorSPIE electrical safety rules and standards • Applicable contractual, regulatory, and statutory obligations • The Electrical Referent shall ensure that electrical safety, control of work, and isolation rules are applied rigorously and without deviation. HSEQ: • Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules. • Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. • Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity. • The Electrical Referent is responsible for ensuring that electrical training and authorization systems are: • Audit-ready at all times • Compliant with client and company requirements • Robust enough to withstand regulatory inspections and incident investigations • He/she shall actively prevent any non-compliant practice that could expose NorSPIE to: • Legal liability • Contractual penalties • Electrical safety incidents Participates in the continuous improvement of NorSPIE Integrated Management System: • Leads or participates in Root Cause Analyses (RCA) following HSE incidents or Quality non-conformities and ensures effective implementation and follow-up of all corrective and preventive actions. • Maintains and updates all documents within his/her area of responsibility. MAIN FUNCTIONS: • The Electrical Referent shall ensure that electrical competence is: • Verified prior to authorization. • Maintained throughout the assignment. • Fully documented and traceable. • Where personnel are authorized with restricted electrical scopes (e.g. isolation only, no electrical work), such limitations shall be: • Explicitly defined • Formally recorded • Clearly communicated • The Electrical Referent shall ensure alignment between: • Contractual Training matrix • Authorization systems • Actual tasks performed in the field

Strong understanding of electrical safety principles. Proven ability to operate within regulated and safety-critical environments. Demonstrated rigor, methodical approach, and sense of responsibility when managing electrical activities. Natural authority based on technical competence and trust Ability to anticipate, analyze, and manage technical risks Ability to work efficiently in a multinational and service-oriented environment Autonomous, rigorous, and reliable
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43451 - ASSET TECHNICAL LEAD (Onshore) M/F

Thu, 28 May 2026 13:27:51 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION: The Asset Technical Lead is responsible for the management and co-ordination of onshore preparation for his/her asset: • Short and medium-term improvement methods. • Planning and scheduling of his/her asset. • Support of offshore operations. • Participate to the definition of long-term maintenance planning (it includes time schedule and resources definition) of his/her asset. • Management and co-ordination with the support of the SAS Manager: o Cranes and safety equipment preparation team. o CBM team. o PSV Workshop. • Directly liaise with SAS manager and offshore management. • Directly liaise with TEPDK method department. HSEQ: • Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSEQ Requirements and Rules. • Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. • Ensures compliance with Operating Procedures & Guidelines with the assets to ensure Process Safety, Operational Safety and Plan Integrity. Participates in the continuous improvement of NorSPIE Integrated Management System: • Leads or participates in Root Cause Analyses (RCA) following HSE incidents or Quality non-conformities and ensures effective implementation and follow-up of all corrective and preventive actions. • Maintains and updates all documents within his/her area of responsibility. MAIN FUNCTIONS: • Coordinate all the activities related to offshore assistance of his asset. • Responsible of the Short-term planning of his asset. • Ensure the preparation is done in due time, in line with priority and site requirement. • Ensure all the means are available to guarantee offshore maintenance operations (Logistic, material, human) of his asset. • Ensure daily and weekly meetings with respective teams. • Ensure that GMC backlog of his/her asset is under control and well managed. • Coordinate with other operating entities (TEPDK / FMC / Vendors)

Polyvalent and experienced in maintenance activities, logistics, mechanics, electricity, instrumentation, in the oil and gas industry. Must show common sense, organization ability, responsibility, and autonomy. Pride in his/her work, ability to maintain good relations with colleagues and others. Ability to work in a multinational team. Ability to work in a service relationship. Proven sense of responsibility and autonomy Rigorous and methodical in his/her approach to operations. Able to anticipate and analyze. Proven ability as a leader of dedicated teams. Natural authority, founded on his/her abilities and on the trust he/she has in his/her teams, is essential.
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43449 - PLANNER (Onshore) M/F

Thu, 28 May 2026 13:24:38 Z

Contract type : Permanent contract
Position description :
HSE Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Contributes to ensuring that TEPDK and NorSPIE’s QHSE regulations are considered during planning as well as approved operating procedures and standard industry practices. Gives his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. Take particular attention to the planning linked to the SECE equipment. GENERAL DESCRIPTION: • Responsible to plan and schedule (2 weeks, 5 weeks and 4 months look ahead) all activities under GMC activities in SAP tacking into account readiness (material, resources, support required from other stakeholders) • Ensure conformance to Client’s Company rules, best standards, and general legislations. MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs’, Preparations, Backlog Control Planning and Equipment availability/reliability. • Respect all processes and procedure (GMC and TEPDK) in place. • Ensuring planned jobs are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS/SAP for execution at site and work location. • Ensuring allocation of resources for the execution of planned jobs • Coordinate meetings with offshore stakeholders for review of draft plan, follow up on site feedbacks and make necessary adjustment before plan is frozen for offshore execution. • Follow up with offshore to ensure clean-up on SAP, of all planned and completed jobs. • Ensure 2 weeks is following the principal schedule, taking into account Vital equipment list, Smart Room request, Team Lead and offshore request. Scheduling principles (Campaign and SD’s excluded) • Interacts with other functional planners (maintenance, FMC, Well Services, Projects, etc.) and IOP planner to optimize interrelated activities. • Executes regular reviews of backlog of planned work to reduce as much as possible (especially the SECE). • Facilitate follow-up of non-executed jobs to ensure additional preparation of the WOs is done. • Coordinate shutdown and campaign: creation and follow-up of readiness tracker (list of WOs, opportunities jobs, materials follow-up, and reporting), ensure to give status during regular meeting with all different stakeholders. Creation of the execution plan (MS Project) and create progress report. • Communication with onshore material coordinators (GMC & TEPDK) regarding shipping of materials and create break-ins as required.

Maintenance Planner (Short and Medium Term)
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43448 - COMPETENCE OFFICER (Onshore) M/F

Thu, 28 May 2026 13:19:45 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION: The Competence Officer ensures that offshore and onshore service delivery is continuously supported by a capable, compliant, and well-prepared workforce. The competence officer is accountable for: Translating operational requirements into competence needs. Support offshore and onshore service delivery by ensuring personnel are: Adequately skilled. Technically and operationally competent. Interface effectively with operations and Support Services Manager to ensure technical readiness of the GMC personnel. The Competence Officer works in close coordination with: HR recruitment team from both mothers companies. CSR. Support Service Manager / GMC management. HSEQ: Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSEQ Requirements and Rules. Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. Ensures compliance with Operating Procedures & Guidelines with the assets to ensure Process Safety, Operational Safety and Plan Integrity. Participates in the continuous improvement of NorSPIE Integrated Management System: Participates in Root Cause Analyses (RCA) following HSE incidents or Quality non‑conformities. Maintains and updates all documents within his/her area of responsibility. Maintain operational readiness documentation and support audits/assessments related to competence management system.

Professionally experienced in operations, with strong technical background for competence management in offshore industrial contexts.
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43446 - MECHANICAL SUPERVISOR M/F

Thu, 28 May 2026 13:02:42 Z

Contract type : Permanent contract
Position description :
HSE: Ensure HSE policy fulfillment during his activities. Establishes and maintain a strong safety culture in line with Company HSE requirements and rules. Is responsible to ensures compliance with HSE Legislation (Occupational and process), Company standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude. Ensure compliance with Operating Procedures and Guidelines with the asset to ensure process safety, operational safety, and plan integrity. Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specifics ones (If required) Give his contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his hierarchy about HSE issue and proposing corrective solutions. Participate in record process (fulfillment and keeping) Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) Ensure validity of work permit relevant to work scope before handling a task. Checks and verifies that mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out, Participate to safety talk before and after intervention. Participate to key procedure audits OPERATION Organises on site the maintenance operations which are placed under his responsibility, and specially: - Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures. - Ensure the quality of his teams’ interventions by frequent on-site checks, - Ensures that TotalEnergies’ HSE regulations are respected (especially procedures related to Work Permits) - With his teams assists specialists working under Specific Maintenance Contracts (SMC), Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Carries out, at the CSR request, any intervention within his field of competence. Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Identifies recurrent corrective maintenance interventions, analyses them, and suggests improvements, Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications.

He is responsible for maintenance operations within his field of competence. He ensures that maintenance operations under his responsibility are carried out in strict accordance with TotalEnergies’ current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by NorSpie. He guarantees a good level of availability of the equipment he is responsible for on production sites. He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Ability to lead and motivate multi-national team. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent and independent in his field, must show common sense, organization ability and responsibility. Must have a proven sense of responsibility. Rigorous and methodical in his approach to operation in particular handling operation Must be able to anticipate and analyze situation. Must have proven ability as a leader of dedicated teams. Natural authority, founded on his abilities and on the trust, he has in his team, is essential. Play a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
Location : Esbjerg Kanalen 1
Language / Level :
English : C-Professional working proficiency

2026-43445 - INSTRUMENT SUPERVISOR M/F

Thu, 28 May 2026 12:56:04 Z

Contract type : Permanent contract
Position description :
Establishes and maintain a strong safety culture in line with Company HSE requirements and rules. Is responsible to ensures compliance with HSE Legislation (Occupational and process), Company standards and Procedures under his area of responsibility. Compliance with Operating Procedures and Guidelines with the asset to ensure process safety, operational safety, and plan integrity. Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specifics ones (If required) Give his contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his hierarchy about HSE issue and proposing corrective solutions. Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) Participate to safety talk before and after intervention. Participate to key procedure audits OPERATION Organises on site the maintenance operations which are placed under his responsibility, and specially: - Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures. - Ensure the quality of his teams’ interventions by frequent on-site checks, - Ensures that TotalEnergies’ HSE regulations are respected - With his teams assists specialists working under Specific Maintenance Contracts (SMC), Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. Manages interventions using the CMMS and checks intervention reports in the CMMS Monitors the functioning of utilities and tools and equipment placed under his responsibility, Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Identifies recurrent corrective maintenance interventions, analyses them, and suggests improvements, Authorized by the RSES, approved by the Affiliate Electrical Authority, and registered in ECRS, heshe acts as Personal Isolation Authority:  · Prepares personal isolation plans for equipment to be isolated and carry out associated risk assessment.  · Leads the toolbox talk for isolation and de-isolation.  · Implements the personal isolation or de-isolation in accordance with the personal isolation plan.  · Ensures that isolation tags and signs are added and removed in connection with the isolation and de-isolation. · Confirms that all isolation points are in place, that the integrity has been proven, and that they are free from all sources of energy.  · Ensures that the worksite is checked and confirmed safe before de-isolation is performed. Ensures that verification after de-isolation is performed where required.

He is responsible for maintenance operations within his field of competence. He ensures that maintenance operations under his responsibility are carried out in strict accordance with TotalEnergies’ current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by NorSpie. He guarantees a good level of availability of the equipment he is responsible for on production sites. He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Ability to lead and motivate multi-national team. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent and independent in his field, must show common sense, organization ability and responsibility. Must have a proven sense of responsibility. Rigorous and methodical in his approach to operation in particular handling operation Must be able to anticipate and analyze situation. Must have proven ability as a leader of dedicated teams. Natural authority, founded on his abilities and on the trust, he has in his team, is essential. Play a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
Location : Esbjerg kanalen 1
Language / Level :
English : C-Professional working proficiency