RSS export of vacancies - Only featured vacancies : No / Profession : Senior Executive / BU Management, Information Technology / Telecommunication, Installation & worksite, Well services (Oil & Gas services)

2026-42394 - Electrical/HVAC Engineer H/F

Thu, 07 May 2026 22:15:21 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION : Responsible for all ELECTRICAL & HVAC preparation subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the site team Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. MAIN FUNCTIONS : • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability. • Take charge of Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparation standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Experience in ELECTRICAL Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), E-vision permit Systems and other Preparations, Tools/Resources.
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43115 - CAMPAIGN LEAD (onshore) H/F

Mon, 27 Apr 2026 08:08:33 Z

Contract type : Permanent contract
Position description :
Management & Coordination of SMART Team resources and workload. Responsible of work performed by SMART Team and Campaign team. Responsible for Middle and long-term planning management in support to the planner. Advice Planning Team of useful information concerning SMART Team in order to optimize scheduling. Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSEQ Requirements and Rules. Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. Ensures compliance with Operating Procedures & Guidelines with the assets to ensure Process Safety, Operational Safety and Plan Integrity. Participates in the continuous improvement of NorSPIE Integrated Management System: Leads or participates in Root Cause Analyses (RCA) following HSE incidents or Quality non conformities and ensures effective implementation and follow up of all corrective and preventive actions. Maintains and updates all documents within his/her area of responsibility. Take particular attention to the planning linked to the SECE equipment. Organizes the maintenance operations which are placed under his responsibility (Campaigns, shutdowns, temporary reinforcements as required, …). Maintenance activities planning and work preparation is provided by the Preparation Team. Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. With his teams assists specialists working under Specific Maintenance Contracts (SMC) linked to his activities, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Ensure the provision of adequate tools and equipment to carry out his teams works, Reviews WO with Preparation team works in case of doubts, Monitors the functioning of utilities and equipment placed under his responsibility, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Carries out any intervention within his field of competence. Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Review on a daily basis with the CSR or the OIM the needs to carry out works according to planning. Continuous Improvement Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance program and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications.

Demonstrate good sense of organization and team management. Wide knowledge and background of maintenance activities on offshore oil and gas platform and in particular competence/experience in the relevant specialties (mechanical/fitting, handling, tooling, electricity, instruments). Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site.
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-42339 - MONTEUR MECANICIEN H/F H/F

Wed, 22 Apr 2026 22:17:03 Z

Contract type : Permanent contract
Position description :
Vous aimez la technique? vous souhaitez un environnement de travail stimulant? vous n'aimez pas la routine? alors ce poste est fait pour vous. Vos missions : Assurer, sur chantier et/ou en atelier, les opérations de démontage, remise en état et remontage de machines tournantes, turbines ou auxiliaires selon une gamme opératoire ou un Plan Qualité Affaire. - Prendre en charge le matériel : Réaliser l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées Identifier des pièces et sous-ensembles et réaliser le stockage approprié - Démonter et expertiser : Réaliser le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles Réaliser le nettoyage approprié des pièces et des sous-ensembles Réaliser le contrôle dimensionnel et géométrique Réaliser le contrôle des jeux fonctionnels Identifier les pièces à réparer ou à remplacer En atelier, renseigner le compte rendu d’évaluation (proposer à son responsable les réparations à effectuer) - Remettre en état et remonter le matériel : Réaliser le contrôle dimensionnel et géométrique des pièves neuves ou réparées Réaliser le contrôle des jeux fonctionnels en cours de remontage Réaliser des opérations d’ajustage Réaliser des opérations de montage Réaliser des opérations simples de tuyauterie et chaudronnerie Réaliser les travaux par point chaud (soudure, montage par dilatation thermique…) Réaliser des opérations de réglage - Opérations de réglage (sur chantier) : Assister :l’ingénieur en charge du démarrage le client dans ses opérations de conduite de démarrage Surveiller : Les éléments critiques et ceux qu’il a visités Les paramètres de fonctionnement et avertir le responsable du démarrage en cas d’anomalie L’absence de fuites d’huile, de combustible, d’air ou de vapeur - Traçabilité des opérations: Renseigner les feuilles de contrôle Renseigner les feuilles d’inventaires à réception et expédition Participer à la rédaction des divers rapports et procès-verbaux Renseigner le Plan Qualité Affaire et gamme - Moyens matériels et poste de travail: Ranger et nettoyer les outillages fournis Veiller à l’entretien du matériel Maintenir le poste de travail propre et rangé Informer le chef d'équipe/chef de chantier/Responsable atelier de tout outillage manquant ou défectueux Effectuer une demande de moyens supplémentaires si requis auprès du chef de chantier / chef d’équipe / Responsable atelier Effectuer le rangement final du chantier / zone de travail atelier et des outillages - Être en appui technique (compagnonnage...) des monteurs mécaniciens, des alternants…. - Peut-être amené à encadrer ponctuellement une équipe de monteurs mécaniciens

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative En chantier et en l’absence de chef de chantier, savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier. Ce poste nécessitera un accompagnement en interne. (formation / compagnonnage / Ecole turbine) Parce-que vos valeurs sont les nôtres : flexibilité, agilité et expertise rejoignez-nous.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : B-Limited working proficiency

2026-43063 - CHEF DE CHANTIER TAV/TAG H/F H/F

Wed, 22 Apr 2026 13:06:52 Z

Contract type : Permanent contract
Position description :
Vous aimez la technique? vous souhaitez un environnement de travail stimulant? vous n'aimez pas la routine? alors ce poste est fait pour vous. Vos missions : Réaliser, organiser et suivre les chantiers de machines tournantes, turbines ou auxiliaires dans le respect en termes de coût, qualité, délai. Il supervise une équipe de chef d'équipe et/ou de monteur mécanicien. - Prendre en charge le matériel o Réaliser/s’assurer/valider l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées o Identifier/s’assurer/valider les pièces et les sous-ensembles et de leur stockage approprié o S'assurer/valider que l'ensemble des pièces et sous-ensembles sont disponibles - Démonter et expertiser o Réaliser/s’assurer/valider le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles o Réaliser/s’assurer/valider le nettoyage approprié des pièces et des sous-ensembles o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique / des jeux fonctionnels o Identifier/s’assurer/valider les pièces à réparer ou à remplacer o Renseigner le compte rendu d’évaluation et proposer au pilote de l’affaire réparations à effectuer. - Remettre en état et remonter le matériel o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique des pièces neuves ou réparées o Réaliser/s’assurer/valider le contrôle des jeux fonctionnels en cours de remontage o Réaliser/s’assurer/valider les opérations d’ajustage / montage / les opérations simples de tuyauterie et chaudronnerie / les travaux par point chaud (soudure, montage par dilatation thermique…) - Opérations de réglage (sur chantier) o Réaliser/s’assurer/valider les opérations de réglage (lignage des internes d’une turbine, alignement machines, pesage de corps,…) - Traçabilité des opérations o Remplir/s’assurer/valider les feuilles de contrôle associés aux opérations de maintenance effectuées o Participer/rédiger/valider les divers rapports et procès-verbaux (partie constat au minimum) et le faire signer au client o Proposer des solutions au pilote d’affaire o Renseigner et valider le Plan Qualité Affaire et/ou gamme - Piloter l’activité o Valider et signer le PDP o Signer le PV d'ouverture de chantier et envoyer au pilote* d'affaire o Veiller à l'exécution des travaux attribués par pilote* d’affaire conformément au planning o Informer quotidiennement le pilote* d’affaire de l'avancement du chantier et émettre des rapports journaliers.... - Assister lors de la mise en service (sur chantier) - Assurer la gestion et l’animation des ressources (moyens humains, matériel et technique)

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative Savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier. Parce-que vos valeurs sont les nôtres : flexibilité, agilité et expertise rejoignez-nous.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : B-Limited working proficiency

2026-43029 - Open Hole Gravel Pack ( OHGP ) Specialist M/F

Tue, 21 Apr 2026 22:28:34 Z

Contract type : Fixed-term-contract
Position description :
1. Review the engineering plan and program and translate them into rig work instructions. 2. Lead OHGP equipment QA/QC, including screen inspection, gravel specification compliance, tool redress verification, and job readiness checks. 3. Develop detailed OHGP operational plans: pump schedules, mechanical setting sequences, contingency procedures for bridging/losses, and pack-quality verification methodology. 4. Participate in and close out HAZOP/HAZID actions relevant to OHGP scope. 5. Conduct pre-mobilization equipment inspection and function testing. 6. Provide on-site OHGP execution support: troubleshoot pack efficiency issues, manage premature screen-outs, and monitor critical parameters in real time. 7. Perform post-job evaluation covering gravel pack quality, pack efficiency, carrier fluid performance, quality of returns, and confirmation of annular fill. 8. Capture lessons learned and recommend continuous improvement; update Wells Basis of Design (BoD) where applicable.

1. Minimum experience ten (10) years in offshore drilling rig operations. 2. At least the most recent five (5) years in supervisory roles. 3. Having valid certifications of : - IWCF/IADC Well Control (surface, appropriate level) - OPITO BOSIET with HUET & EBS - H2S/BA training 4. Familiar with Permit‑to‑Work (PTW), SIMOPS, and emergency response processes. 5. Having proficiency with software and templates (e.g., gravel‑pack design and modeling tools; well testing analysis suites; MS 365/SharePoint).
Location : jakarta
Language / Level :
English : E-Native or bilingual proficiency

2026-42655 - IT Officer M/F

Tue, 21 Apr 2026 10:01:44 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy, KSA for a : IT Officer JOB PURPOSE: To be the link with the Headquarters for the IT management within the BU MEA an Implement and support to the IT transition policy / plan. He/She is accountable for maintaining proper access rights to sensitive data and ensuring protection of personal data such as medical records. REPORTING TO: Regional Finance Manager TASKS AND RESPONSIBILITIES: · Maintains the computer systems, servers and networks of the BU. He / she may install and configure computer systems, diagnose hardware and software faults and solve technical and applications problems. · Installing and configuring new computer and server, Installing and testing new software and corporate software · Maintaining computers, servers and network hardware · Maintaining in house software (GEMS / EDMS / Prolog / SAGE), insuring they are working properly · Insuring the coherence of the data informed in the in-house software, taking care of their recurrent updates · Extracting data of in-house software upon the request of other support functions, business centers or Headquarters · Administering file server user permissions and data access policies · Managing firewall, email and spam filtering systems · Ensuring anti-virus software is installed, properly configured, regularly updated and working properly on all PC and server stations · Monitoring LAN for security issues · Creating and setting account users in Active Directory, managing Active Directory and Group Policies · Setting up and maintaining backup system, and onsite/offsite storage · Planning for disaster recovery · Installing software available to appropriate users · Monitoring against usage of unlicensed and unauthorized software · Diagnosing and troubleshooting hardware & software failures (application plus system data base) · Implement IT solutions, policies and procedures to maximize efficiency and availability of existing infrastructure, ensure integrity of all company electronic data, and support effectively the company goals and strategies. · Liaise with external support agencies to resolve faults specify. · Identifying suitable IT vendors and support contractors · Liaising with external support agencies to resolve faults · Maintaining computer peripheral equipment e.g. printers, scanners · Maintaining IT inventory and software licensing compliance checklist · Managing Relationship with system subcontractor · Correspondent with the headquarters IT team and the subsidiaries.

QUALIFICATIONS: · Bachelor’s degree (with preference of a Technical qualification) or equivalent experience · 5+ years of IT maintenance experience ideally with the region REQUIRED SKILLS: · Strong knowledge of all software, hardware, database, servers etc. used in the company’s network · Ability to troubleshoot and swiftly resolve issues You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office
Location : Khobar , Saudi Arabia
Language / Level :
English : C-Professional working proficiency

2025-39575 - Sr. Material Analyst M/F

Mon, 20 Apr 2026 08:37:16 Z

Contract type : Permanent contract
Position description :
We currently have an opportunity within SPIE Global Services Energy, Qatar Sr. Material Analyst Single focal point for all materials and materials related issues to ensure safe deliveries and availability of materials on time to serve maintenance planned and unplanned spares/ consumables/ special and equipment requirement. Duties and Responsibilities a) Review and approve requests for new materials creations and updates (PO text, stock parameters, Stock location, etc.), through MDG b) Review and approve BOM's creation and update/ deletion, etc., through MDG. Including projects, eMOC’s shutdown, etc. c) Follow-up with procurement and expediting for delivery of PO's, overdue PO's and long Pending PR's, and critical materials d) Steward, coordinate and follow-up of emergency procurements e) Resolve suppliers Technical Clarifications and follow/ monitor Technical Bid Evaluations f)Coordinate and steward Repair and return of materials (External), including capital spares monitoring and return to ensure availability g) Coordinate logistics to and from vendors, follow-up and update h) Facilitate return to stock, through warehouse returns, refurbishment process i)Provide and update refurbishment status report (traceability and visibility) j)Monitor Spares preservation- Ensure availability when needed. k) Monitor PM WO's release on time, PM WO's update and Task Confirmation, CM post PM WO close-out l) Ensure availability of ES for capital/ identified spares for preservation, and support warehouse in identifying non-capital spares for preservation and update m) Coordinate and Clear ongoing and long pending issues with engineering and supply such as: a. Materials discrepancy reports (from suppliers), b. materials returns, write-off and disposal, c. collection of direct charge and aging reservation materials d. Stock levels adjustment, etc. n) Development and analysis of regular and adhoc materials status reports, such as a. Weekly, bi-weekly and materials status reports, b. MDG reports, c. Nonstock materials, aging reservations, temporary laydown area, d. Excess stock and Stock out, etc. e. Obsolescence reports by LCM f. technical clarifications reports o) GE-CSA (BH) support: a. Approve ZVPO for spares handover and follow-up, b. customs clearance approval, CC allocation, c. loaning, d. R&R, etc. e. interface and stewardship to resolve and support all GE/ BH issues

Educational Qualifications: Minimum Higher Secondary School Education plus a three-year technical diploma (HNC, HND or equivalent) in Engineering. Relevant Work Experience: Minimum of 10 years of experience in the maintenance materials management/ spares management/ planning, in the Oil, Gas or Petrochemical Industries. Computer Skills: Computer literate with proficient knowledge of SAP and commonly used Microsoft business software packages required. English Language Skills: Good written and oral communication skills in English. Job Specific Requirements: • Should be proficient in SAP Material transactions. • Should understand Maintenance Business Process. • Should be able to read material specifications and understands specific material requirements • Should be able to read P&IDs, drawings, and different technical documents.
Location : RASLAFFAN
Language / Level :
English : C-Professional working proficiency

2024-36075 - Production Supervisor M/F

Sun, 19 Apr 2026 10:38:32 Z

Contract type : International Contract
Position description :
Job Purpose: This position is a unique opportunity to manage the day-to-day Plants operations and First-degree Maintenance programs at an onshore field that produces oil. Your main duties will be to:- · To organize the day-to-day Plant activities, managing the operators dispatching, following up tasks execution and reporting the feed back to the production superintendent in liaison with the control room. · To prepare commissioning procedures · To act as site representative for commissioning and/or startup operations. · To supervise the operating parameters of the production and utility process’s/equipment. · To organize the execution of level one and level 2 maintenance including minor repairs on production equipment’s. · To supervise the coordination of the work permit execution, applying precautions/conditions highlighted, ensuring the tidiness of the area, and managing the Permit to work tracking system. · To advise the Production Superintendent of any potential hazardous situation or changes to operating conditions and implements any actions necessary to maintain safe continuous hydrocarbon production. · To manage the shift organization of operators under his resp. · To ensure the validity of the well tests according to procedures and well performance program for new wells considering well start up procedure emitted by WPWI Eng. · To prepare the daily report. · To enforce the waste management philosophy on the Plant. · To supervise the operations under his resp. as HSE representative regarding the safety and environment policy. · Supervise in person the delicate or risky field operations. · Assume the operational responsibilities as part of the work permit. · Ensure that all activities are conducted in respect of HSE Group standards and in accordance to the Italian regulations Promote Company’s HSE and quality policies, rules, procedures, and programs; Implement actions in order to reach Company’s HSE objectives; Promote safety and environment awareness. Accountabilities: · Manage the Chemicals supply and monitoring on the Plant if necessary related to his responsibilities. · To ensure that plants and equipment run according to operating procedures, Company rules and production requests. · Supervision of main production parameters, downgraded situations, shifts hand over; etc… · To ensure that operations activities are conducted in compliance with safety and environmental protection.

Candidate profile: Ideally you will have graduated in chemical/production engineering with a minimum experience of 5/10 years of experience in Totalenergies affiliate within working in operation. You are fluent in Arabic, and fluency in English or French would be an advantage. You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.
Location : basra
Language / Level :
Arabic : E-Native or bilingual proficiency
Language / Level :
English : D-Full professional proficiency
Language / Level :
French : D-Full professional proficiency

2026-42841 - QAQC Inspector M/F

Tue, 07 Apr 2026 15:43:40 Z

Contract type : International Contract
Position description :
Ø Monitor key performance indicators and quality targets, in coordination with the QMS, identifying improvement opportunities. Ø Follow up and Conduct Internal/external Audit (ISO, API ) when requested Ø Follow up and Conduct Internal /External Audit for Company Qualified Licensee. (Vam,Tenaris , NOV Grand Prideco Ø Verifications of document control as per Licensee procedure and upload to web site Licensee. Ø Follow up and investigate NCR internal and external opening. Ø Traceability of Incoming / outgoing documentation works order Client. Ø Strictly adhere to company’s rules, regulations and code of ethics Ø Share work and perform the inspection to the standard procedure and/or specified by Client request. Ø Review and prepare final report and/or certificate of conformity in a timely manner and assure its immediate dispatch to the Client. Ø Delivery of the W.O. file with all documentation to Finance department for Invoice Process. Ø Weekly report of the Quality department performance. Ø Control and records the use of gauges Ø Ensure gauges used in the shop are calibrated Ø Conduct dimensional and final inspection of tools. Ø Conduct inspection of surface treated (phosphate, cold rolling, and sand blasting) tools as well as give technical advice on surface treatment processes. Ø Ensure identification and traceability of tools and other customer properties. Ø Ensure proper filing and control of approved inspection and tally reports Ø Participate in the identification of nonconforming products Ø Maintain Gauges Control register for calibration update and interface with Logistics department & for Gauge handling to and from Licensors and/or calibration shops. Ø Knowledge of Make-up operations.

Ø License degree or technical Diploma: Electronics, Mechanical Ø Mechanical Background knowledge Ø Computer literate (Microsoft word, excel, power point) Ø Lead Auditor certificate will be an Advantage · Minimum 3/ 5 Years on the same position. ü API Q1 & Q2 knowledge ü ISO 9001 Quality Management System last edition ü OCTG, BHA, Drilling Equipment Inspection. ü Premium Connection Vam, Tenaris , Nov Grand Prideco ü T.H. DS-1 ü Calibration equipment. ü Handling and care of OCTG, Drilling equipment and BHA.
Location : Luanda, Machine Shop
Language / Level :
English : D-Full professional proficiency

2026-42393 - CRANE PREPARATION TECHNICIAN H/F

Sun, 05 Apr 2026 22:19:45 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION : Responsible for all Cranes subject under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team. Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. MAIN FUNCTIONS : • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability Take charge of Cranes Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations and planning. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved Crane WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Mechanical Preparations – Team Lead for clarifications where required.

Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), Evision permit Systems and other Preparations, Tools/Resources. Skills required: Computer Literacy, Preparations tools proficiency, Ability to work in a multicultural organization, good presentation and communication skills
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-42259 - Field Technician - HV/FO M/F

Sat, 28 Mar 2026 23:36:04 Z

Contract type : Permanent contract
Position description :
Follow instructions of the team leader / supervisor on the WTG/OSP at all times Ensure materials and kit are safely stored and free from damage Install, control, and maintain asset protection and housekeeping Assist with lifting and lowering of asset equipment Ensure wastage is segregated and disposed as per the waste management procedures Follow project procedures, report any deviation to team leader before proceeding Follow all instructions given to them by their team leader, Supervisor, or Manager Work safely at-all-times Take an active part in HSEQ throughout the project duration, reporting any safety observations both positive and /or negative Encourage their fellow team members to be proactive, take care of each other Attend daily briefings with Supervisor for HSEQ, progress, logistics, welfare Advise of any potential risk and/or delay and mitigate where possible Communicate with the team leader or supervisor any unforeseen issues or concerns. Defect reporting Activate the all-stop command if deemed necessary to protect people, property, and the environment Maintain contractor to client relations

Within SPIE Wind Connect the HV\FO assistants play an important role in the continuous improvement process which is aimed at developing emerging talent within the business. HV\FO assistants are mentored by senior personnel on live projects, which provides them with experience, knowledge, and real-time training.
Location : Section 3, Minsheng E Rd, Songshan District, Taipei City, Taiwan
Language / Level :
English : C-Professional working proficiency

2026-42557 - QAQC Inspector* M/F

Wed, 18 Mar 2026 14:48:37 Z

Contract type : Permanent contract
Position description :
Ø QAQC will follow the instruction given by Quality Supervisor/coordinator. Ø Interpreting engineering drawings & requirements; performs thorough dimensional inspection and completes Inspection Report provided by the machine shop. Ø Use dimensional measuring instruments like thread ring/plug gauges, ball gauges, micrometers, calipers, indicators, profile projectors, and Brinell hardness test equipment as well when request. Ø Follow up Inspection Procedure for OCTG premium connections. ( Tenaris , Vallourec ) Ø Inspector shall be competent to raise NCRs when nonconforming conditions are detected Ø QAQC Inspector must communicate any issue find during inspection of the Client tools to the direct Supervisor. Ø QAQC Inspector will receive in electronic version (e-mail) some confidential document of Client propriety that must NOT be share previous authorization. Ø Performing the Work in accordance with the parameters specified in the programme (WORK ORDER) shall be subject to acceptance by Company. The QAQC Inspector will cover the inspection and traceability documentation for assembly, function testing, and repair tools

• License degree or technical Diploma: Electronics, Mechanical or other • Computer literate (Microsoft word, excel, power point) Experience and technical knowledge: · At least minimum 3/5 years of experience in the same position. ü OCTG, BHA, Drilling Equipment ü Premium Connection on CSG & TBG (Tenaris Vallourec) ü Premium Connection on drilling equipment (Grand Prideco) ü ISO / API ü Calibration equipment. ü Handling and care of OCTG, Drilling equipment and BHA. ü Material identification and characteristic.
Location : Luanda, Machine Shop
Language / Level :
English : C-Professional working proficiency

2026-42439 - QAQC Coordinator/Supervisor M/F

Tue, 10 Mar 2026 09:02:38 Z

2026-42287 - Site Lifting Specialist OFFSHORE M/F

Mon, 02 Mar 2026 08:53:50 Z

Contract type : International Contract
Position description :
- Promote safe handling & lifting operations referring to TOTAL HSE Policy, Technical and operational Company rules (CR), General Specifications (GS), national and international standards. - Assess handling and lifting organization in the affiliate. - Review engineering calculation for critical lifts. - Approve critical lifting plans and attend the lifting operations (or delegate to SLS). - Conduct annual reviews in handling and lifting. - Participate in all handling and lifting audits (Contractors sites). - Report HIPO, incidents and anomalies. - Provide expertise in day to day handling and lifting activities on sites: lifts categorization, hazards identifications and risks assessments, technical review s (lifting procedures and organizations),equipment's selection and contractor's equipment’s' suitability, toolbox talks meeting organization, post-job debriefing and completed job's assessment. - 'Gen eric lifting plans' periodical review and re-issue. - Skills' assessments, qualifications and progress/improvement plan drafts for all personnel involved in lifting and handling operations. - Lifting and handling procedures/instructions' update and development. Ensure that they are well assimilated and applied. - issue monthly activity reports - assesses the personnel competencies to carry out lifting or handling operations. - On sites, coaching and mentoring of staff involved in lifting and handling operations and particularly Angolese (part of angolanization process). Propose individuals to RSES for SLS nomination. - advises the subsidiary RSES's and project managers on request. - Seeks assistance from Headquarters CPLO if there are doubts on rules application - ln case of severity level 2 lifting (based on TOTAL CR EP HSE 041 "Technological risk management"), the CPLO must be involved in the risk assessment and has to valid the lifting plan. - ln case of severity levei1 lifting, the CPLO has to be involved in the lifting project and has to report to Headquarters CPLO. The last can involve EP/ DEV/TEC for validation if deemed necessary. - Detailed written hand-over before holidays. - Position is based offshore and onshore (Sonils base), in Angola. - Requires frequent transfers (from/to offshore or onshore), often with short notice. - Fast growing activity {from 4 to 6 FPSO in 2 years). - Lack of Lifting safety awareness within workforce

Exhaustive knowledge of international lifting standards and best practices {ASME, FME, DIN, NSL, etc .) Technical knowledge of lifting equipment found on a logistic base and on offshore assets (pedestal cranes, crawler cranes, gantry cranes, forklifts, slings, et c...). Ability to prepare and check lifting engineering calculations, risks assessments, li fti ng plans 15 years experi ence in lifting trend Experience in Oil & Gas industry is a plus Autonomy, Flexibility, Adaptability are mandatory Teambuilding awareness, leadership, mu lt icultural awareness and communication skills Language: fluent Englis h or French, good practice of Portuguese Computer skills: Microsoft Office Suite (Word, Excel, Power Point) Good writing skills (issuance of reports, audits, synthesis).
Location : Offshore block 17
Language / Level :
English : C-Professional working proficiency

2026-42286 - Site Lifting Specialist ONSHORE M/F

Mon, 02 Mar 2026 08:52:43 Z

Contract type : International Contract
Position description :
- Promote safe handling & lifting operations referring to TOTAL HSE Policy (CR EP LSO 04 3), national and international standards. - Refer to CPLO for critical lifts: participate to Risk Assessments, - Approve and review "Generic lifting plans". - Prepare, conduct training sessions on " handling and lifting" for SONILS and TEPA staff. - Participate in handling and lifting audits (TEPA and Contractors sites). - Repo rt HIPO, incidents and anomalies. - lnvolved in Cause Tree Analysis process after incidents, commit to Action plans foll ow-up. - Supervise some lifting operation by him, or on SONILS request. - Act as " Project Leader" when non-routine or Critical lift shave to be performed: collect data, interact with parties (SONILS, ship agent, Contractors, etc), integrate CPLO for Risk assessment. - Advises the Base Manager on lifting equipment(cranes, fork lifts ), CCUs (containers, baskets, racks) specifications. - Assesses personnel compet encies to carry out lifting or handling operations. - lssue weekly and monthly activity reports - On sites(TEPA operated zones, Jetty ), coaching of staff involved in lifting and handling operations and particularly Angolese (part of angolanísation process).

- Exhaustive knowledge of international liftin g standards and best practices (ASME, FME, DIN, NSL, etc ) - Technical knowledge of lifting equipment found on logistic base (mobile cranes, gantry cranes, forklifts, slings, etc...). - Ability to prepare and check ri sks assessments, lifting plans for standard lift s - 3 years’ experience in Lifting trend - Experience in Oil & Gas lndustry is required (working in hazardous area, ATEX concept) . - Autonomy, Flexibility, Adaptability are mandatory (multicultural environment) - HSE degrees and Certificate es required. - Crane and forklift operator certificate required. - Language: fluent English and Portuguese, French is a plus. - Computer skills: Microsoft Office Suite (Word, Excel, Power Point) Good writing skills (issuance of report s, audits, synthesis).
Location : SONILS - Luanda onshore
Language / Level :
English : C-Professional working proficiency

2026-41936 - CONTRACT SITE REPRESENTATIVE (CSR) H/F

Wed, 25 Feb 2026 23:18:54 Z

Contract type : Permanent contract
Position description :
PURPOSE Under the authority of Contract Manager/Deputy Contract Manager and the SAS Technical Manager, he organises and plans maintenance operations on site, whether these are carried out by his own teams or by subcontractors. He is the technical and HSE management representative of NorSpie on site. He is responsible for the on-site management of NorSpie’s maintenance teams (administrative, operational, coordination, professional). HSE: Ensures HSE policy fulfilment during his activities. Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules. Ensures compliance with HSE (occupational and process) Legislation, Company Standards Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude. Ensure mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out (including the collective tool certification). Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety. Operational Safety and Plan Integrity. Contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions. Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause. OPERATIONS Working closely with TotalEnergies’ site maintenance superintendent, He: Advises TotalEnergies superintendent on 2 weeks, monthly and annual planning, - Distributes the daily activity to the supervisors as prepared by the planning team, - Coordinates the maintenance and inspections operations, - Accountable of the site contractual performances (including the KPI). Methods - Ensures the appropriateness of the operating and maintenance procedures and tools employed by his crews and, if necessary, suggests improvements to TotalEnergies’ maintenance superintendent, - Ensures co-ordination between maintenance operations and Preparation teams, - Keeps an up-to-date list of work that cannot be performed except during inspections of machines or shutdowns, - Suggests corrective measures to TotalEnergies if this backlog threatens to become unmanageable, Team Leading Responsible for his teams on site: - Ensures the correct behaviour of his teams in accordance with the general safety regulations of the subsidiary and, if need be, takes the necessary corrective measures, - With the assistance of NorSpie base support, he organises the rotation schedules of his teams (administrative and logistical requirements, crew changes, etc.) - Identifies the training needs of his teams and makes training requests as appropriate. - Manages the Nationalisation plan and proposes all necessary adjustments.

Experience in offshore activities. Proven ability to lead and motivate large multi-national dedicated team. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent and independent in his field, show common sense, organization ability and responsibility. Rigorous and methodical in his approach to operation in particular handling operation Must be able to anticipate and analyze situation. Natural authority, founded on his abilities and on the trust, he has in his team. Play a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
Location : esbjerg
Language / Level :
English : C-Professional working proficiency

2026-42158 - Lifting Supervisor M/F

Wed, 18 Feb 2026 09:07:51 Z

Contract type : International Contract
Position description :
road and extensive knowledge in handling & lifting appliance & operations. To work on international standards such as: BS, LOLER, NORSOK. To work in onshore & offshore operations. To follow risk assessment in relation to health, safety & environment. To supervise critical lifts. To plan critical and non-critical lifts. To follow fitting procedure writing and reporting.

Technical Engineer and / or Industry related qualifications such as LEEA / EAL / CPA. Minimum 5 years in the lifting & handling industry at supervisory level. Experienced in Oil & Gas Industry. Lifting equipment inspector for: General Lifting Equipment All types of Cranes (onshore & offshore) Containers & CCU’s Forklift trucks and stackers Winches and powered hoists Overhead travelling cranes, runway beams and swing jibs Wire rope inspector
Location : offshore luanda
Language / Level :
English : C-Professional working proficiency

2026-41937 - GAS TURBINE PACKAGE COORDINATOR H/F

Mon, 16 Feb 2026 08:50:54 Z

Contract type : Permanent contract
Position description :
HSE • Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules. • Ensures that Client’s and NorSpie’s HSE regulations are observed (especially procedures related to Control of work), as well as approved operating procedures, standard industry practice and Danish regulation during performance of maintenance operations placed under his responsibility. • Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity. GENERAL DESCRIPTION Purpose • He is responsible for the reliability and integrity of turbo machines. • He ensures that maintenance operations under his responsibility are carried out in strict accordance with TEPDK’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by NorSPIE. Planning • Participate and review the preventive maintenance program/planning for his scope of work. • Organises and ensures the progress of the onsite maintenance equipment under his supervision liaising with SITE, planning Engineer and interface with onshore support team of requirements for spare parts and materials and opportunity jobs. • Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. • Manages interventions using the CMMS. Operations • Organises on site the maintenance operations which are related to turbo machines by coordinating supervisors. • Conduct periodic checks and routine maintenance work. Inspect turbines daily, • Participates in condition monitoring checks on gas turbines. • Executes all maintenance routines in time, • Monitors the operational performance of the gas turbines, running parameters and auxiliaries’ operations using the condition monitoring techniques. • Check tools and spares parts defined for turbogenerators and their auxiliaries • Carries out performance test as required • Performs ad-hoc repairs and all agreed breakdown repair in accordance with manufacturer recommendation and requirements. • Assists specialists working under Specific Maintenance Contracts (SMC), • Enters intervention reports in the CMIMS (including those concerning SMC) and writes the technical reports related to his field, • Takes in charge the turbo packages in case of breakdown until correct operation status. • Assists operation team in conducting the turbo machines.

Highly experienced Maintenance Technician in compressors, turbines, …and knowledge of O&G industry processes Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent in his field, must show common sense, organization ability, autonomy, and responsibility. He must be able to anticipate and analyze situations to avoid any safety issue and report to hierarchy the progress of works and alert in case of risks.
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-41965 - PLC Specialist* M/F

Thu, 05 Feb 2026 07:30:59 Z

Contract type : Permanent contract
Position description :
Operations ✓ Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. ✓ Assists specialists working under Specific Maintenance Contracts (SMC), ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Enters intervention reports in the CMMS and writes the technical reports related to his field, ✓ Monitors the functioning of utilities and equipment systems which are under his responsibility, ✓ Performs the diagnostics and trouble shooting in the PLC, ✓ Follows-up the parameter values and alarms in the concerned systems, for condition monitoring purpose, ✓ Carries out on request, any intervention within his field of competence. ✓ Assists the L-iCSO to ensure an acceptable Cybersecurity level of the SII ✓ Ensures all cybersecurity rules are applied on the WORKSITE he is appointed. Methods ✓ Proposes any relevant action to improve performance and availability of control system. ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts, ✓ Guaranties that software produced for modification or corrective actions are in conformity with functional analysis, ✓ Guaranties that control system documentation is up to date,

Qualifications required The holder of this position must have the following qualifications: Chartered Engineer (A-levels + 5 years’ study) or Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent. ✓ At least 3 years as control system specialist in petrochemical industry, ✓ A knowledge of the principles related to the process and equipment of oil and gas treatment installations ✓ Specific professional knowledge: CMMS : SAP/R3, all types of PLC ✓ Specific knowledge in networks and Cybersecurity, dedicated training proof is a plus ✓ Ability to work in a large multinational team ✓ Ability to work independently while maintaining good relations with colleagues and others ✓ Physical ability to work on offshore installations in the climatic conditions of the site ✓ Working language: English Bright 3.5 (or equivalent)
Location : DALIA FPSO
Language / Level :
English : C-Professional working proficiency

2026-41955 - Machineshop Supervisor M/F

Wed, 04 Feb 2026 14:32:58 Z

Contract type : Permanent contract
Position description :
In order to participate to our growth of Sub-Saharan Africa Business Unit, we are looking for a MachineShop Supervisor H/F in Angola. Rotation: 8*3 // 6 days/week // around 9 hours/day. Key Responsibilities: Manage machine shop operations and stock inventory Program and operate CNC machines (reading/editing G-codes) Perform precision machining for OCTG, accessories, DP & HWDP Conduct quality control using precision measuring/calibration instruments Ensure operational risk management and HSE compliance Supervise and train machine shop team

Required Qualifications & Skills: Technical Expertise: In-depth knowledge of oilfield threads (premium types) OCTG accessories, Drill Pipe (DP) & Heavy Weight Drill Pipe (HWDP) machining requirements Trigonometric calculations and technical drawings interpretation CNC Proficiency: CNC programming and G-code editing Precision measuring instruments and calibration Operational Skills: 6 years experience in oil industry Stock management and computer tools Strong understanding of operational risks Soft Skills: Team management and leadership Fluent English & Portuguese
Location : Luanda
Language / Level :
English : C-Professional working proficiency
Language / Level :
Portuguese : C-Professional working proficiency