RSS export of vacancies - Only featured vacancies : No / Profession : Business / Project Management, Commissionning and start up, Design & engineering office, Senior Executive / BU Management, Installation & worksite / Contract type : Permanent contract

2026-42394 - Electrical/HVAC Engineer H/F

Thu, 07 May 2026 22:15:21 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION : Responsible for all ELECTRICAL & HVAC preparation subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the site team Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. MAIN FUNCTIONS : • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability. • Take charge of Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparation standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Experience in ELECTRICAL Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), E-vision permit Systems and other Preparations, Tools/Resources.
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2025-41245 - Resource Coordinator M/F

Tue, 05 May 2026 16:40:02 Z

Contract type : Permanent contract
Position description :
Collaborate with the Project Manager and the PMO support functions to manage manpower mobilisation. Attend resource and project meetings and coordinate the rotation planning process. Ensure technicians' qualifications, certifications, and training are up-to-date and recorded; coordinate recertification needs with the Training Coordinator. Ensure timely and accurate verification and approval of hours, absence, and holiday data submitted by technicians the EGT portal. Maintain regular communication with technicians regarding assignments and project expectations. Coordinate allocation of PPE and workwear, ensuring accurate cost allocation to projects. Book travel and accommodation for assigned project teams. Plan and document workload details, including port operations and service documentation requirements. Assist the PM in planning site activities, tracking changes in project scope and status, and updating relevant records. Develop and update technician rotation plans and ensure alignment with key contractual deliverables. Communicate with clients on progress, deviations and deliverables as contractually defined in collaboration with the Project Manager. Update relevant stakeholders during project execution regarding changes to schedules, scope, or priorities.

A Project Coordinator's responsibilities include the coordination of personnel for each project, producing project documents, sourcing and maintaining resourcing plans and coordinating project administration. The Project Coordinator will be responsible for developing and preparing reports, consolidating human capital data, and managing multiple project resourcing scopes. The Project Coordinator role work closely with project managers to optimise resources and develop a training matrix tracker to ensure projects are fully resourced with a qualified and skilled workforce.
Location : SPIE Wind Connect HQ, Skelton, Cleveland TS12 2LQ
Language / Level :
English : E-Native or bilingual proficiency

2026-43115 - CAMPAIGN LEAD (onshore) H/F

Mon, 27 Apr 2026 08:08:33 Z

Contract type : Permanent contract
Position description :
Management & Coordination of SMART Team resources and workload. Responsible of work performed by SMART Team and Campaign team. Responsible for Middle and long-term planning management in support to the planner. Advice Planning Team of useful information concerning SMART Team in order to optimize scheduling. Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSEQ Requirements and Rules. Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. Ensures compliance with Operating Procedures & Guidelines with the assets to ensure Process Safety, Operational Safety and Plan Integrity. Participates in the continuous improvement of NorSPIE Integrated Management System: Leads or participates in Root Cause Analyses (RCA) following HSE incidents or Quality non conformities and ensures effective implementation and follow up of all corrective and preventive actions. Maintains and updates all documents within his/her area of responsibility. Take particular attention to the planning linked to the SECE equipment. Organizes the maintenance operations which are placed under his responsibility (Campaigns, shutdowns, temporary reinforcements as required, …). Maintenance activities planning and work preparation is provided by the Preparation Team. Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. With his teams assists specialists working under Specific Maintenance Contracts (SMC) linked to his activities, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Ensure the provision of adequate tools and equipment to carry out his teams works, Reviews WO with Preparation team works in case of doubts, Monitors the functioning of utilities and equipment placed under his responsibility, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Carries out any intervention within his field of competence. Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Review on a daily basis with the CSR or the OIM the needs to carry out works according to planning. Continuous Improvement Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance program and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications.

Demonstrate good sense of organization and team management. Wide knowledge and background of maintenance activities on offshore oil and gas platform and in particular competence/experience in the relevant specialties (mechanical/fitting, handling, tooling, electricity, instruments). Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site.
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-42339 - MONTEUR MECANICIEN H/F H/F

Wed, 22 Apr 2026 22:17:03 Z

Contract type : Permanent contract
Position description :
Vous aimez la technique? vous souhaitez un environnement de travail stimulant? vous n'aimez pas la routine? alors ce poste est fait pour vous. Vos missions : Assurer, sur chantier et/ou en atelier, les opérations de démontage, remise en état et remontage de machines tournantes, turbines ou auxiliaires selon une gamme opératoire ou un Plan Qualité Affaire. - Prendre en charge le matériel : Réaliser l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées Identifier des pièces et sous-ensembles et réaliser le stockage approprié - Démonter et expertiser : Réaliser le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles Réaliser le nettoyage approprié des pièces et des sous-ensembles Réaliser le contrôle dimensionnel et géométrique Réaliser le contrôle des jeux fonctionnels Identifier les pièces à réparer ou à remplacer En atelier, renseigner le compte rendu d’évaluation (proposer à son responsable les réparations à effectuer) - Remettre en état et remonter le matériel : Réaliser le contrôle dimensionnel et géométrique des pièves neuves ou réparées Réaliser le contrôle des jeux fonctionnels en cours de remontage Réaliser des opérations d’ajustage Réaliser des opérations de montage Réaliser des opérations simples de tuyauterie et chaudronnerie Réaliser les travaux par point chaud (soudure, montage par dilatation thermique…) Réaliser des opérations de réglage - Opérations de réglage (sur chantier) : Assister :l’ingénieur en charge du démarrage le client dans ses opérations de conduite de démarrage Surveiller : Les éléments critiques et ceux qu’il a visités Les paramètres de fonctionnement et avertir le responsable du démarrage en cas d’anomalie L’absence de fuites d’huile, de combustible, d’air ou de vapeur - Traçabilité des opérations: Renseigner les feuilles de contrôle Renseigner les feuilles d’inventaires à réception et expédition Participer à la rédaction des divers rapports et procès-verbaux Renseigner le Plan Qualité Affaire et gamme - Moyens matériels et poste de travail: Ranger et nettoyer les outillages fournis Veiller à l’entretien du matériel Maintenir le poste de travail propre et rangé Informer le chef d'équipe/chef de chantier/Responsable atelier de tout outillage manquant ou défectueux Effectuer une demande de moyens supplémentaires si requis auprès du chef de chantier / chef d’équipe / Responsable atelier Effectuer le rangement final du chantier / zone de travail atelier et des outillages - Être en appui technique (compagnonnage...) des monteurs mécaniciens, des alternants…. - Peut-être amené à encadrer ponctuellement une équipe de monteurs mécaniciens

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative En chantier et en l’absence de chef de chantier, savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier. Ce poste nécessitera un accompagnement en interne. (formation / compagnonnage / Ecole turbine) Parce-que vos valeurs sont les nôtres : flexibilité, agilité et expertise rejoignez-nous.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : B-Limited working proficiency

2026-43063 - CHEF DE CHANTIER TAV/TAG H/F H/F

Wed, 22 Apr 2026 13:06:52 Z

Contract type : Permanent contract
Position description :
Vous aimez la technique? vous souhaitez un environnement de travail stimulant? vous n'aimez pas la routine? alors ce poste est fait pour vous. Vos missions : Réaliser, organiser et suivre les chantiers de machines tournantes, turbines ou auxiliaires dans le respect en termes de coût, qualité, délai. Il supervise une équipe de chef d'équipe et/ou de monteur mécanicien. - Prendre en charge le matériel o Réaliser/s’assurer/valider l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées o Identifier/s’assurer/valider les pièces et les sous-ensembles et de leur stockage approprié o S'assurer/valider que l'ensemble des pièces et sous-ensembles sont disponibles - Démonter et expertiser o Réaliser/s’assurer/valider le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles o Réaliser/s’assurer/valider le nettoyage approprié des pièces et des sous-ensembles o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique / des jeux fonctionnels o Identifier/s’assurer/valider les pièces à réparer ou à remplacer o Renseigner le compte rendu d’évaluation et proposer au pilote de l’affaire réparations à effectuer. - Remettre en état et remonter le matériel o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique des pièces neuves ou réparées o Réaliser/s’assurer/valider le contrôle des jeux fonctionnels en cours de remontage o Réaliser/s’assurer/valider les opérations d’ajustage / montage / les opérations simples de tuyauterie et chaudronnerie / les travaux par point chaud (soudure, montage par dilatation thermique…) - Opérations de réglage (sur chantier) o Réaliser/s’assurer/valider les opérations de réglage (lignage des internes d’une turbine, alignement machines, pesage de corps,…) - Traçabilité des opérations o Remplir/s’assurer/valider les feuilles de contrôle associés aux opérations de maintenance effectuées o Participer/rédiger/valider les divers rapports et procès-verbaux (partie constat au minimum) et le faire signer au client o Proposer des solutions au pilote d’affaire o Renseigner et valider le Plan Qualité Affaire et/ou gamme - Piloter l’activité o Valider et signer le PDP o Signer le PV d'ouverture de chantier et envoyer au pilote* d'affaire o Veiller à l'exécution des travaux attribués par pilote* d’affaire conformément au planning o Informer quotidiennement le pilote* d’affaire de l'avancement du chantier et émettre des rapports journaliers.... - Assister lors de la mise en service (sur chantier) - Assurer la gestion et l’animation des ressources (moyens humains, matériel et technique)

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative Savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier. Parce-que vos valeurs sont les nôtres : flexibilité, agilité et expertise rejoignez-nous.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : B-Limited working proficiency

2025-39134 - Project Engineer M/F

Fri, 17 Apr 2026 22:06:24 Z

Contract type : Permanent contract
Position description :
· Understanding specialist legislation (standards and regulations) in the Electrical Engineering & Fibre Optic field and develop plans & procedures to achieve and maintain full compliance for the SPIE Wind Connect group. · To ensure adherence to the necessary electrical / fibre optic safety and technical standards for the SPIE Wind Connect Group. · Implement the required engineering standards and best practice techniques for electrical / fibre optic works, taking responsibility for meeting industry recognised standards and client requirements. · Contribute towards improving technical and operational procedures used within the group. · To provide electrical / fibre optic technical support and guidance for the SPIE Wind Connect group functions ensuring compliance throughout the business. · Operational understanding of all specialist electrical / fibre optic test equipment used within the SPIE Wind Connect Group. · Monitor, review, and critique all test equipment used in SPIE Wind Connect Group operational activities. Analyse for suitability, performance and reliability of different manufacturers models. Support the SPIE Wind Connect equipment hire department, with recommendations for selection of equipment in terms of excellence, reliability and maintenance. · Ensure electrical/ fibre optic test equipment is in good working order. · Provide specialist functional electrical / fibre optic training to the operational personnel. · Assist in the development of training courses and testing regimes. Support the SPIE Wind Connect Group in providing technical expertise for client technical clarifications during tender, project life cycle and business development opportunities.

Project engineer reporting directly to the Head of Projects / Lead Project Engineer. Providing engineering & technical support for all operational aspects engineering works performed in business execution. Working within the engineering support team; providing technical solutions & procedures for all HV & fibre optic operations within the SPIE Wind Connect Group.
Location : Skelton, TS12 2LQ
Language / Level :
English : C-Professional working proficiency

2026-42996 - Cost Controller M/F

Thu, 16 Apr 2026 22:27:52 Z

Contract type : Permanent contract
Position description :
Responsibility for project cost control from handover through to project close-out. Establish, manage, and maintain project budgets, cost plans, and forecasts, ensuring alignment with approved commercial agreements. Track actual costs against forecast and budget, identifying cost overruns, savings, and margin movements. Maintain accurate cost reports, cash flow forecasts, and monthly cost value reconciliations (CVRs). Support month-end processes, including accruals, cost recognition, and financial reporting in liaison with Finance. Present unplanned expenditure for approval by budget holder(s) Assist in the preparation and assessment of applications for payment, interim valuations, and final accounts. Support contractual cost management, ensuring costs are recoverable and compliant with contract terms. Maintain clear audit trails for commercial decisions, change orders, and approvals. Assist Project Managers with commercial risk and opportunity management throughout the project lifecycle. Track all project costs including labour, materials, subcontractors, travel, accommodation and expenses and summarise for project performance P&L. Ensure all costs are properly authorised, coded, and allocated to the correct project and cost headings Monitor subcontractor and supplier spend against budget allowances and contractual commitments. Produce regular cost and commercial reports for Project Managers, Commercial Managers, and senior stakeholders. Provide clear commentary on cost performance, risks, variations, and forecast outturn costs. Attend project, commercial, and client meetings as required to support cost and commercial discussions. Act as a key interface between Project Delivery, QS, Procurement, and Finance functions.

The Cost Controller is responsible for the financial and commercial control of projects, ensuring robust cost management, accurate forecasting, and effective reporting throughout the project lifecycle. Including cost planning, valuation support, variation assessment, and commercial reporting, working closely with Project Managers, Resourcing, Finance, and Procurement to protect project margins and contractual position.
Location : Wandhills Ave, Skelton-in-Cleveland, Saltburn-by-the-Sea TS12, UK
Language / Level :
English : E-Native or bilingual proficiency

2026-42393 - CRANE PREPARATION TECHNICIAN H/F

Sun, 05 Apr 2026 22:19:45 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION : Responsible for all Cranes subject under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team. Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. MAIN FUNCTIONS : • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability Take charge of Cranes Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations and planning. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved Crane WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Mechanical Preparations – Team Lead for clarifications where required.

Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), Evision permit Systems and other Preparations, Tools/Resources. Skills required: Computer Literacy, Preparations tools proficiency, Ability to work in a multicultural organization, good presentation and communication skills
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-42795 - PVV Pre-Commissioning Supervisor M/F

Thu, 02 Apr 2026 12:52:21 Z

Contract type : Permanent contract
Position description :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight • Ensure Contractor compliance with TotalEnergies HSE standards. • Verify safe execution of pressure testing, nitrogen leak testing, and line blowing activities. • Review risk assessments and JSAs prior to critical activities (hydrotest, pneumatic test, chemical cleaning, nitrogen displacement). • Ensure strict control of temporary test equipment and test packs. • Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance • Supervise Contractor PVV Pre-Commissioning activities. • Verify adequacy of manpower, certified technicians, calibrated gauges, and test equipment. • Assist Contractor in resolving technical interface issues when required. 2.3 Technical Oversight – PVV Scope Witness, review and validate Contractor execution of: • Line checking against P&ID and Isometrics • Hydrostatic testing of piping systems • Pneumatic testing where applicable • Flushing, blowing and cleaning activities (water flushing, air blowing, steam blowing as applicable) • Drying and preservation activities • Valve inspection • Verification of correct installation of spectacle blinds and spades • Final reinstatement after testing Ensure no pressure test or system release occurs without Company validation. 2.4 Documentation & Quality Control • Review and approve: o Test packs o Hydrotest dossiers o Method statements o Inspection & Test Records (ITRs) o Pressure charts and calibration certificates • Monitor punch list identification and closure (A/B/C categories as per project). • Ensure redline markups are properly reflected in P&IDs and Isometrics. • Review final PVV Pre-Commissioning dossier before handover.

• Degree or Diploma in Mechanical Engineering or related discipline • Minimum 5 years Oil & Gas experience • Minimum 3 years in Piping / Mechanical Pre-Commissioning roles • Previous experience in SIMOPS environments • Strong knowledge of pressure testing standards (ASME, project specifications) • Familiarity with TotalEnergies General Specifications preferred
Location : Ratawi Oil Field, North Rumaila
Language / Level :
Arabic : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency

2026-42794 - Instrumentation Pre-Commissioning Supervisor M/F

Thu, 02 Apr 2026 12:49:31 Z

Contract type : Permanent contract
Position description :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight • Ensure Contractor compliance with TotalEnergies HSE standards. • Verify strict control of live systems and interface with energized electrical panels. • Review risk assessments and JSAs prior to critical activities • Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance • Supervise Contractor Instrumentation Pre-Commissioning activities. • Verify adequacy of manpower, certified technicians, calibrated instruments, and testing equipment. • Ensure calibration benches and tools comply with project requirements. • Assist Contractor in resolving technical or interface issues when required. • Ensure proper sequence between: o Pre-Commissioning o Commissioning • Ensure subsystem boundaries are respected in line with OPERCOM philosophy. 2.3 Technical Oversight – Instrumentation Scope Witness, review and validate Contractor execution of: • Instrument calibration (pressure, temperature, level, flow transmitters) • PSV / safety instrument checks (as applicable within scope) • Loop checking (field to DCS/ESD/PLC) • Marshalling cabinet inspections • JB (Junction Box) inspection and continuity verification • Impulse air tubing and leak testing • DCS / ESD I/O verification (interface with ICSS team) • Cause & E􀆯ect (C&E) test preparation support Ensure no loop closure or live signal testing occurs without Company validation. 2.4 Documentation & Quality Control • Review and approve: o Test procedures o Method statements o Calibration certificates o Inspection & Test Records (ITRs) o Loop folders o Pre-Commissioning dossiers • Monitor punch list identification and closure (A/B/C categories as per project). • Ensure redline markups are properly reflected in loop diagrams and hook-ups. • Review final Instrumentation Pre-Commissioning dossier before handover. • Raise observations and request corrective actions when required.

• Degree or Diploma in Instrumentation / Electrical & Instrumentation Engineering • Minimum 5 years Oil & Gas experience • Minimum 3 years in Instrumentation Pre-Commissioning / Commissioning roles • Previous experience in SIMOPS environments • Familiarity with TotalEnergies General Specifications preferred
Location : Ratawi Oil Field, North Rumaila
Language / Level :
Arabic : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency

2026-42793 - Electrical Precom Supervisor M/F

Thu, 02 Apr 2026 12:45:52 Z

Contract type : Permanent contract
Position description :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight  Ensure Contractor compliance with TotalEnergies HSE standards.  Review risk assessments and JSAs prior to critical activities.  Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance  Supervise Contractor Electrical Pre-Commissioning activities.  Verify adequacy of manpower, tools, calibrated instruments, and test equipment.  Assist Contractor in resolving technical issues when required.  Ensure proper sequence between: o Mechanical Completion o Pre-Commissioning o Commissioning. 2.3 Technical Oversight – Electrical Scope Witness, review and validate Contractor execution of:  IR & continuity testing  HV / MV / LV cable testing  Transformer pre-energization checks  Switchgear inspection  Protection relay testing  Earthing & lightning protection verification  Motor solo runs  UPS & battery testing  Energization procedures  Interface loop checks (with Instrument team) Ensure no energization occurs without Company validation. 2.4 Documentation & Quality Control  Review and approve: o Test procedures o Method statements o Inspection & Test Records (ITRs) o Energization dossiers  Monitor punch list closure.  Ensure redline markups are properly reflected.  Review final Pre-Commissioning dossier before handover.  Raise observations and request corrective actions when required.

3. Required Qualifications  Degree in Electrical  Minimum 5 years Oil & Gas experience.  Minimum 3 years in Pre-Commissioning / Commissioning Electrical roles.  Previous experience in SIMOPS environments.  Familiarity with TotalEnergies General Specifications preferred.
Location : Ratawi Oil Field, North Rumaila
Language / Level :
Arabic : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency

2026-42259 - Field Technician - HV/FO M/F

Sat, 28 Mar 2026 23:36:04 Z

Contract type : Permanent contract
Position description :
Follow instructions of the team leader / supervisor on the WTG/OSP at all times Ensure materials and kit are safely stored and free from damage Install, control, and maintain asset protection and housekeeping Assist with lifting and lowering of asset equipment Ensure wastage is segregated and disposed as per the waste management procedures Follow project procedures, report any deviation to team leader before proceeding Follow all instructions given to them by their team leader, Supervisor, or Manager Work safely at-all-times Take an active part in HSEQ throughout the project duration, reporting any safety observations both positive and /or negative Encourage their fellow team members to be proactive, take care of each other Attend daily briefings with Supervisor for HSEQ, progress, logistics, welfare Advise of any potential risk and/or delay and mitigate where possible Communicate with the team leader or supervisor any unforeseen issues or concerns. Defect reporting Activate the all-stop command if deemed necessary to protect people, property, and the environment Maintain contractor to client relations

Within SPIE Wind Connect the HV\FO assistants play an important role in the continuous improvement process which is aimed at developing emerging talent within the business. HV\FO assistants are mentored by senior personnel on live projects, which provides them with experience, knowledge, and real-time training.
Location : Section 3, Minsheng E Rd, Songshan District, Taipei City, Taiwan
Language / Level :
English : C-Professional working proficiency

2026-41936 - CONTRACT SITE REPRESENTATIVE (CSR) H/F

Wed, 25 Feb 2026 23:18:54 Z

Contract type : Permanent contract
Position description :
PURPOSE Under the authority of Contract Manager/Deputy Contract Manager and the SAS Technical Manager, he organises and plans maintenance operations on site, whether these are carried out by his own teams or by subcontractors. He is the technical and HSE management representative of NorSpie on site. He is responsible for the on-site management of NorSpie’s maintenance teams (administrative, operational, coordination, professional). HSE: Ensures HSE policy fulfilment during his activities. Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules. Ensures compliance with HSE (occupational and process) Legislation, Company Standards Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude. Ensure mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out (including the collective tool certification). Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety. Operational Safety and Plan Integrity. Contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions. Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause. OPERATIONS Working closely with TotalEnergies’ site maintenance superintendent, He: Advises TotalEnergies superintendent on 2 weeks, monthly and annual planning, - Distributes the daily activity to the supervisors as prepared by the planning team, - Coordinates the maintenance and inspections operations, - Accountable of the site contractual performances (including the KPI). Methods - Ensures the appropriateness of the operating and maintenance procedures and tools employed by his crews and, if necessary, suggests improvements to TotalEnergies’ maintenance superintendent, - Ensures co-ordination between maintenance operations and Preparation teams, - Keeps an up-to-date list of work that cannot be performed except during inspections of machines or shutdowns, - Suggests corrective measures to TotalEnergies if this backlog threatens to become unmanageable, Team Leading Responsible for his teams on site: - Ensures the correct behaviour of his teams in accordance with the general safety regulations of the subsidiary and, if need be, takes the necessary corrective measures, - With the assistance of NorSpie base support, he organises the rotation schedules of his teams (administrative and logistical requirements, crew changes, etc.) - Identifies the training needs of his teams and makes training requests as appropriate. - Manages the Nationalisation plan and proposes all necessary adjustments.

Experience in offshore activities. Proven ability to lead and motivate large multi-national dedicated team. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent and independent in his field, show common sense, organization ability and responsibility. Rigorous and methodical in his approach to operation in particular handling operation Must be able to anticipate and analyze situation. Natural authority, founded on his abilities and on the trust, he has in his team. Play a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
Location : esbjerg
Language / Level :
English : C-Professional working proficiency

2026-41937 - GAS TURBINE PACKAGE COORDINATOR H/F

Mon, 16 Feb 2026 08:50:54 Z

Contract type : Permanent contract
Position description :
HSE • Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules. • Ensures that Client’s and NorSpie’s HSE regulations are observed (especially procedures related to Control of work), as well as approved operating procedures, standard industry practice and Danish regulation during performance of maintenance operations placed under his responsibility. • Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity. GENERAL DESCRIPTION Purpose • He is responsible for the reliability and integrity of turbo machines. • He ensures that maintenance operations under his responsibility are carried out in strict accordance with TEPDK’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by NorSPIE. Planning • Participate and review the preventive maintenance program/planning for his scope of work. • Organises and ensures the progress of the onsite maintenance equipment under his supervision liaising with SITE, planning Engineer and interface with onshore support team of requirements for spare parts and materials and opportunity jobs. • Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. • Manages interventions using the CMMS. Operations • Organises on site the maintenance operations which are related to turbo machines by coordinating supervisors. • Conduct periodic checks and routine maintenance work. Inspect turbines daily, • Participates in condition monitoring checks on gas turbines. • Executes all maintenance routines in time, • Monitors the operational performance of the gas turbines, running parameters and auxiliaries’ operations using the condition monitoring techniques. • Check tools and spares parts defined for turbogenerators and their auxiliaries • Carries out performance test as required • Performs ad-hoc repairs and all agreed breakdown repair in accordance with manufacturer recommendation and requirements. • Assists specialists working under Specific Maintenance Contracts (SMC), • Enters intervention reports in the CMIMS (including those concerning SMC) and writes the technical reports related to his field, • Takes in charge the turbo packages in case of breakdown until correct operation status. • Assists operation team in conducting the turbo machines.

Highly experienced Maintenance Technician in compressors, turbines, …and knowledge of O&G industry processes Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent in his field, must show common sense, organization ability, autonomy, and responsibility. He must be able to anticipate and analyze situations to avoid any safety issue and report to hierarchy the progress of works and alert in case of risks.
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-41855 - Coordinateur projets E&I M/F

Wed, 28 Jan 2026 10:55:14 Z

Contract type : Permanent contract
Position description :
- Assurer transition management - équipes sur site - Suivi approvisionnement - Logistique matériel + personnel - Assurer suivi des travaux - Reporting - HR - Plannification

- Profil E&I exigé - A l'aise en informatique (Microsoft office) - Connaissance chantier (idéalement offshore) - Connaissance matériel E&I - Profil expérimenté et résistant à la pression - Le candidat doit faire preuve de diplomatie et de patience
Location : SPIE ANGOLA
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency

2025-40787 - E&I project engineer M/F

Mon, 20 Oct 2025 09:23:22 Z

Contract type : Permanent contract
Position description :
To support project activities on technical and administrative aspects, To coordinate personal logistic and material dispatch related with E&I project, To make commercial and technical proposals, To follow human ressources internaly and externaly, To apply safety and quality rules in place

Team spirit, initiative, good communication, organized
Location : Boa vista, Luanda, ANGOLA
Language / Level :
English : C-Professional working proficiency

2025-39130 - Project Manager M/F

Sun, 15 Jun 2025 22:22:32 Z

Contract type : Permanent contract
Position description :
· Manage pre-project planning, budgeting, and scheduling to ensure continuity is achieved. · Deliver in line with the project and business objectives. · Deliver scope of works against a contract and manage all commercial aspects. · Manage relationships with key stakeholders, steering group, clients and resource providers. · Work in parallel with the Project Engineers, Procurement, Project Resources, cost control and Finance to ensure all resources are in place and pre-planned before the project live date. · Establish regular communications with external and internal stakeholders to ensure effective communication throughout the project on day-to-day activities and any project changes. · Develop Key Client relationships and upsell the services of SPIE Wind Connect for future opportunities. · Monitor project metrics, performance and ensure that project reporting is swift and accurate in line with procedures. · Feedback any lessons learned to the Head of Projects for every project or work scope and feedback into HSE and the Bids & Tendering Team. · Drive a cost and risk management culture to ensure the projects are successful, identifying early risks, liaising closely with the Finance Department and Cost Controllers. Promote and support a positive HSE culture and support on necessary project audits.

Overall Management of all aspects of a Project lifecycle from concept to operational execution. To ensure the successful completion of the project, on time, safely and within budget by engaging with internal and external teams whilst maintaining the client relationship.
Location : Skelton, TS12 2LQ
Language / Level :
English : C-Professional working proficiency

2024-35007 - Ingénieur projet H/F

Wed, 16 Apr 2025 07:39:37 Z

Contract type : Permanent contract
Position description :
Ce poste fait partie de l'équipe excellence opérationnelle de la Business Unit Afrique Sub-Saharienne. Après une période d'apprentissage des procédures et de familiarisation avec les services supports de la société (Juridique, fiscal, assurance, qualité, Hygiène Sécurité Environnement, risques, chiffrage des offres), le périmètre d'activité couvrira les responsabilités suivantes : Garantir les termes des contrats commerciaux. Gérer les relations avec le client partie prenante du projet. Être responsable de la rentabilité des opérations et du respect des plans de maintenance définis en amont et des coûts afférents. S'assurer que le projet se déroule dans le respect du calendrier et du budget prévus. Optimiser les coûts Appliquer et maintenir les standard qualité et HSE dans le respect de la réglementation. Superviser la main d'œuvre sur site et le travail des éventuels sous-traitants. Anticiper les besoins en personnel, matériel et équipements en fonction des besoins. Participer à l’élaboration des plans de recrutement et de formation des équipes de son périmètre en lien avec le département RH. Etablir, analyser et suivre l'évolution des Indicateurs Clés de Performance.

Ingénieur ou équivalent avec une première expérience pertinente dans le secteur de l'énergie ou dans un autre secteur industriel. La connaissance de la maintenance et de la gestion de projet est un plus indéniable. Rigoureux et doté d'une bonne capacité d'analyse. Anglais courant indispensable.
Location : Cergy, France
Language / Level :
English : D-Full professional proficiency
Language / Level :
French : E-Native or bilingual proficiency

2023-29800 - RESPONSABLE ACHAT TRANSIT et LOGISTIQUE* H/F

Mon, 17 Jul 2023 23:15:26 Z

Contract type : Permanent contract
Position description :
Notre équipe composée de professionnels passionnés et fortement engagés cherche actuellement à renforcer ses compétences au travers l'addition d'un(e) Responsable Achat Transit et Logistique. Cette création de poste s'imbrique dans notre stratégie de développement au travers de la rationalisation de nos processus dans le domaine et contribuera de manière significative au succès de notre entreprise. Vous appréciez les environnements dynamiques? Vous recherchez une équipe au sein de laquelle solidarité et sentiment d'appartenance ne sont pas des mots vains? Alors faites nous parvenir votre candidature. Vos missions seront les suivantes: Elaborer, mettre en œuvre et évaluer la stratégie d’achats de la filiale en parfaite cohérence avec la politique d’achats du groupe. Gérer les équipes, organiser et coordonner toutes les activités liées aux achats des biens et services de sources locales ou internationales. Suivre de bout en bout les opérations de logistique et transit (importations, dédouanement et transport domestique) de la filiale dans le respect des règlementations locale et internationale, des procédures internes en s’assurant d’une gestion efficace des coûts. Organiser le département, l’équipe de collaborateurs et assurer la cohésion en son sien et avec les autres départements. Développer, diriger et exécuter des stratégies d’achat cohérentes avec celle du groupe. Encadrer une équipe d’acheteurs. Valider ou renégocier un référencement, Lancer des appels d’offres et exploiter les réponses, Négocier des conditions d’achat favorables. Effectuer des analyses de coûts et de scénarios, ainsi que des analyses comparatives Négocier des accords-cadres avec fournisseurs ou prestataires stratégiques. Assurer la maitrise, le suivi et l’optimisation de tous les flux logistiques internationaux de biens et services (import et export) jusqu’à leur destination finale. Superviser et coordonner toutes les formalités administratives, douanières et les diverses attestations notamment d’assurances et des produits dangereux. Superviser et garantir les l’efficacité des opérations de dédouanement, manutention, stockage et livraison des marchandises, en tenant compte des contraintes de priorités, délais, coûts, et agir en conformité avec la politique QHSE Planifier et gérer de manière stratégique la logistique, l’entreposage, le transport et le service à la clientèle Organiser l’entrepôt, cataloguer les marchandises, planifier les itinéraires et traiter les envois. Assurer le suivi de la qualité, de la quantité, des niveaux de stock, des délais de livraison, des coûts de transport et de l’efficacité Superviser et optimiser l’ensemble du parc roulant (maintenance, carburants, contrats de location, documents administratifs, etc.), et des chauffeurs ; (plans de route, sécurité routière, etc.) Superviser l’administration et optimiser la politique voyages (réservation billets d’avion et hôtels, certificats d’hébergement et visa, etc.)

Diplôme d’ingénieur ou BAC +5 en gestion, transport & logistique, école de commerce. 5 ans d’expérience minimum à un poste de responsable achats, transport et logistique ou autres postes similaires. Techniques de négociation Capacités avérées à gérer le stress Excellentes capacités d’analyse, de résolution de problèmes et d’organisation Capacité à travailler de manière autonome et à gérer plusieurs projets Capacité démontrable à diriger et à gérer une équipe Connaissances Juridiques La connaissance du secteur pétrolier est un plus Bonne maitrise des outils informatique Bonnes compétences communicationnelles et rigueur La maitrise de la langue anglaise est obligatoire
Location : Pointe-Noire, Republic of the Congo
Language / Level :
French : D-Full professional proficiency

2023-29971 - Contrôleur de Gestion H/F

Thu, 13 Jul 2023 23:10:32 Z

Contract type : Permanent contract
Position description :
Le contrôleur de gestion est responsable de la mise en place des procédures et des outils de gestion au niveau de SPIE Oil and Gas Services. Il/elle établit des prévisions et assure le suivi des KPI du compte de gestion au moyen de rapports qu'il/elle partage avec la direction générale afin de les accompagner dans leurs prises de décision. Pilote le processus budgétaire, s'assurer qu'il est parfaitement aligné sur les besoins opérationnel Produire des comptes d'exploitation mensuels et des rapports d'activité Garantir la disponibilité, la qualité, la fiabilité et la pertinence des indicateurs financiers Conduire et superviser les analyses et études demandées par le Directoire Garantir les principes de gestion du groupe SPIE et assurer la relation avec le groupe sur toutes les questions liées à son périmètre de consolidation

Contrôle des coûts, comptabilité ou finance • Finance (Bilan, débit, compte de résultat...) • Maîtrise d'Excel, des outils BI, des outils de gestion d'entreprise • Bonne culture comptable • Bonne connaissance du métier et du fonctionnement de l'entreprise • Compétences en gestion d'équipe Aisance relationnelle • Capacité d'organisation et de planification • Capacité à anticiper et à réagir aux changements qui peuvent avoir un impact sur l'entreprise • Un esprit de synthèse et d'esprit critique
Location : Pointe-Noire, République du CONGO
Language / Level :
French : D-Full professional proficiency