RSS export of vacancies - Only featured vacancies : No / Profession : Commissionning and start up / Contract type : Permanent contract

2026-42795 - PVV Pre-Commissioning Supervisor M/F

Thu, 02 Apr 2026 12:52:21 Z

Contract type : Permanent contract
Position description :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight • Ensure Contractor compliance with TotalEnergies HSE standards. • Verify safe execution of pressure testing, nitrogen leak testing, and line blowing activities. • Review risk assessments and JSAs prior to critical activities (hydrotest, pneumatic test, chemical cleaning, nitrogen displacement). • Ensure strict control of temporary test equipment and test packs. • Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance • Supervise Contractor PVV Pre-Commissioning activities. • Verify adequacy of manpower, certified technicians, calibrated gauges, and test equipment. • Assist Contractor in resolving technical interface issues when required. 2.3 Technical Oversight – PVV Scope Witness, review and validate Contractor execution of: • Line checking against P&ID and Isometrics • Hydrostatic testing of piping systems • Pneumatic testing where applicable • Flushing, blowing and cleaning activities (water flushing, air blowing, steam blowing as applicable) • Drying and preservation activities • Valve inspection • Verification of correct installation of spectacle blinds and spades • Final reinstatement after testing Ensure no pressure test or system release occurs without Company validation. 2.4 Documentation & Quality Control • Review and approve: o Test packs o Hydrotest dossiers o Method statements o Inspection & Test Records (ITRs) o Pressure charts and calibration certificates • Monitor punch list identification and closure (A/B/C categories as per project). • Ensure redline markups are properly reflected in P&IDs and Isometrics. • Review final PVV Pre-Commissioning dossier before handover.

• Degree or Diploma in Mechanical Engineering or related discipline • Minimum 5 years Oil & Gas experience • Minimum 3 years in Piping / Mechanical Pre-Commissioning roles • Previous experience in SIMOPS environments • Strong knowledge of pressure testing standards (ASME, project specifications) • Familiarity with TotalEnergies General Specifications preferred
Location : Ratawi Oil Field, North Rumaila
Language / Level :
Arabic : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency

2026-42794 - Instrumentation Pre-Commissioning Supervisor M/F

Thu, 02 Apr 2026 12:49:31 Z

Contract type : Permanent contract
Position description :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight • Ensure Contractor compliance with TotalEnergies HSE standards. • Verify strict control of live systems and interface with energized electrical panels. • Review risk assessments and JSAs prior to critical activities • Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance • Supervise Contractor Instrumentation Pre-Commissioning activities. • Verify adequacy of manpower, certified technicians, calibrated instruments, and testing equipment. • Ensure calibration benches and tools comply with project requirements. • Assist Contractor in resolving technical or interface issues when required. • Ensure proper sequence between: o Pre-Commissioning o Commissioning • Ensure subsystem boundaries are respected in line with OPERCOM philosophy. 2.3 Technical Oversight – Instrumentation Scope Witness, review and validate Contractor execution of: • Instrument calibration (pressure, temperature, level, flow transmitters) • PSV / safety instrument checks (as applicable within scope) • Loop checking (field to DCS/ESD/PLC) • Marshalling cabinet inspections • JB (Junction Box) inspection and continuity verification • Impulse air tubing and leak testing • DCS / ESD I/O verification (interface with ICSS team) • Cause & E􀆯ect (C&E) test preparation support Ensure no loop closure or live signal testing occurs without Company validation. 2.4 Documentation & Quality Control • Review and approve: o Test procedures o Method statements o Calibration certificates o Inspection & Test Records (ITRs) o Loop folders o Pre-Commissioning dossiers • Monitor punch list identification and closure (A/B/C categories as per project). • Ensure redline markups are properly reflected in loop diagrams and hook-ups. • Review final Instrumentation Pre-Commissioning dossier before handover. • Raise observations and request corrective actions when required.

• Degree or Diploma in Instrumentation / Electrical & Instrumentation Engineering • Minimum 5 years Oil & Gas experience • Minimum 3 years in Instrumentation Pre-Commissioning / Commissioning roles • Previous experience in SIMOPS environments • Familiarity with TotalEnergies General Specifications preferred
Location : Ratawi Oil Field, North Rumaila
Language / Level :
Arabic : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency

2026-42793 - Electrical Precom Supervisor M/F

Thu, 02 Apr 2026 12:45:52 Z

Contract type : Permanent contract
Position description :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight  Ensure Contractor compliance with TotalEnergies HSE standards.  Review risk assessments and JSAs prior to critical activities.  Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance  Supervise Contractor Electrical Pre-Commissioning activities.  Verify adequacy of manpower, tools, calibrated instruments, and test equipment.  Assist Contractor in resolving technical issues when required.  Ensure proper sequence between: o Mechanical Completion o Pre-Commissioning o Commissioning. 2.3 Technical Oversight – Electrical Scope Witness, review and validate Contractor execution of:  IR & continuity testing  HV / MV / LV cable testing  Transformer pre-energization checks  Switchgear inspection  Protection relay testing  Earthing & lightning protection verification  Motor solo runs  UPS & battery testing  Energization procedures  Interface loop checks (with Instrument team) Ensure no energization occurs without Company validation. 2.4 Documentation & Quality Control  Review and approve: o Test procedures o Method statements o Inspection & Test Records (ITRs) o Energization dossiers  Monitor punch list closure.  Ensure redline markups are properly reflected.  Review final Pre-Commissioning dossier before handover.  Raise observations and request corrective actions when required.

3. Required Qualifications  Degree in Electrical  Minimum 5 years Oil & Gas experience.  Minimum 3 years in Pre-Commissioning / Commissioning Electrical roles.  Previous experience in SIMOPS environments.  Familiarity with TotalEnergies General Specifications preferred.
Location : Ratawi Oil Field, North Rumaila
Language / Level :
Arabic : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency