RSS export of vacancies - Only featured vacancies : No / Profession : All support functions, Business / Project Management, Design & engineering office, Facilities Management / Maintenance, Installation & worksite / Contract type : Fixed-term-contract

2026-45257 - Maintenance Technician - Instrument/Electrical M/F

Sun, 08 Nov 2026 07:14:11 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Doha, Qatar for a : Instrument/Electrical Technician Job Purpose The instrument/electrical technician is responsible for carrying out preventive, corrective, and breakdown maintenance activities on electrical, instrumentation, and control systems to ensure the safe, reliable, and efficient operation of plant facilities. The role requires the ability to work independently while complying with QatarEnergy safety standards and maintenance procedures. Key Responsibilities Perform preventive, corrective, and emergency maintenance on electrical and instrumentation equipment with minimal supervision. Troubleshoot, repair, test, and maintain electrical systems, instruments, and control equipment. Carry out installation, commissioning, maintenance, and repair of high-voltage (HV) and low-voltage (LV) electrical equipment. Maintain and troubleshoot field instruments, transmitters, analyzers, switches, control valves, and associated control systems. Perform maintenance and fault-finding on Programmable Logic Controller (PLC)-based control systems and related instrumentation. Conduct functional tests, calibrations, and inspections in accordance with maintenance procedures and OEM recommendations. Read and interpret electrical and instrumentation drawings, schematics, loop diagrams, and technical manuals. Ensure all work is executed in compliance with QatarEnergy safety regulations, permit-to-work requirements, and company procedures. Maintain good housekeeping standards in work areas and workshops. Participate in emergency response activities when required and remain physically fit to be part of the Emergency Response Team. Prepare maintenance reports and accurately record completed work activities in the maintenance management system.

Diploma or Technical Certificate in Electrical Engineering, Instrumentation Engineering, Electronics, or a related discipline. Minimum 5 years of experience in electrical and instrumentation maintenance within oil & gas, petrochemical, LNG, refinery, or industrial facilities. Experience working with PLC systems, field instrumentation, electrical motors, switchgear, control panels, and associated equipment. Familiarity with preventive and corrective maintenance practices in operational facilities. Previous experience in offshore facilities is an advantage. Technical Skills Electrical troubleshooting and fault diagnosis. Calibration and maintenance of instrumentation systems. Maintenance of HV/LV electrical equipment. PLC systems maintenance and basic programming knowledge. Reading and interpreting technical drawings and schematics. Knowledge of industrial safety standards and permit-to-work systems. Requirements Ability to communicate effectively in English, both verbally and in writing. Capable of working independently with minimal supervision. Strong commitment to safety and quality standards. Physically fit and medically capable of working in industrial and offshore environments. Ability to understand and implement OEM maintenance and repair procedures. You are fluent in English with both written and verbal communication You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.
Location : Doha
Language / Level :
English : C-Professional working proficiency

2026-44975 - Mechanical Preparator Engineer M/F

Fri, 06 Nov 2026 23:15:12 Z

Contract type : Fixed-term-contract
Position description :
Directly working jointly with the Client . He/She actions and expedites AKPO maintenance Equipment repairs. He/She assists COMPANY in the preparation and execution of detailed maintenance work scopes and its associated planning. He/She checks and ensures that vital equipment on production sites is available as and when required. Provide onshore support and focal point for the Offshore Maintenance teams. Main duties: Prepare scopes of work and ensure that all materials and equipment are available as and when required for modifications, repairs or maintenance activities. Prepare scopes of work for approved work programmes ensuring that all relevant operating procedures and safety regulations are written in and that all necessary materials and equipment are available as and when required. Prepare with COMPANY review and Validation, various calls for bid to contractors invited to tender for work to be carried out. Supervise the execution of modification works at site, or as required by his hierarchy, especially for works executed by external contractors. He ensures that proper COMPANY procedures are followed, and that all modifications are properly documented. Assist with the analysis of equipment malfunctions and makes recommendations for repair and future preventive action. Propose and justify recommendations for the improvement of equipment availability and/or efficiency, and works with other entities in Production Methods to execute desired modifications. Assist with the preparation of the preventive maintenance schedule for plant and equipment and ensures that planned work takes place. Under direction of COMPANY, Follow and analyse on-site spare parts stock levels ensuring they are adequate and maintained, and that materials/equipment received accord with specifications.

Knowledge of TOTAL Process and organization Gas Generators, Gas compressors, Hydraulic systems, Diesel Engines, Broad spectrum of pumps experience (all types), Air compression and General Utilities equipments
Location : OFFSHORE
Language / Level :
English : E-Native or bilingual proficiency

2026-44717 - Technician Planning - Call Off

Thu, 05 Nov 2026 13:04:58 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Servies Energy Doha for a: Technician Planning - Call Off Job Purpose: This position is a unique opportunity with so many advantage in Oil and Gas career sector in one of the most important Project handled by SPIE in Qatar with QatarEnergy in which the Project in its 11th year with multi discipline tasks in Maintenance and Operation of large Industrial Area Client satisfaction concluded by awarding a new 05 years contract of the Project with new Positions added The candidate shall be responsible for planning and scheduling of maintenance works, work order status review and monitoring, report preparation, Working on established computerize planning and scheduling tools such as SAP, Microsoft project, maintenance management software. To work in SAP system for job planning, work order management, work confirmation, history entry, report preparation in SAP (CMMS).

Ideally you will have 03 years diploma from a recognized institution and SAP PM Module knowledge and experience Proven knowledge of maintenance planning and contract administration. Read and interpret manuals and drawings. Knowledge on Key Performance Indicators and maintenance strategies, Preventive maintenance Plans and optimization. Computer literature in appropriate software. Written communication, Active listening, Verbal communication, editing. Organization, Time management, Attention to detail, Problem-solving, MS Office 2000 packages. The candidate shall have experience in oil and gas industry or petrochemical industry or with major utilities. The candidate concludes with important abilities including Safe work culture and practices.
Location : Ras Laffan Industrial City
Language / Level :
English : D-Full professional proficiency

2026-45125 - Engineering Support (Commissioning/Process Engineer)

Mon, 26 Oct 2026 03:00:11 Z

Contract type : Fixed-term-contract
Position description :
1. Develop and review commissioning, start-up, and operational procedures to ensure safe and efficient system handover. 2. Plan, coordinate, and execute pre-commissioning, commissioning, start-up, performance testing, and handover activities. 3. Provide process engineering support, including process design review, operating philosophy development, and system optimization. 4. Coordinate with engineering, construction, operations, and contractor teams to ensure commissioning readiness and successful project execution. 5. Verify process systems, equipment, and control philosophies comply with design specifications, operational requirements, and safety standards. 6. Support process simulations, troubleshooting, root cause analysis, and resolution of technical issues during commissioning and start-up. 7. Review PFDs, P&IDs, cause & effect diagrams, operating manuals, and commissioning documentation to ensure technical completeness and operability. 8. Monitor commissioning and process performance, identify risks or gaps, and recommend corrective actions to achieve project objectives. 9. Ensure compliance with HSE requirements, company standards, and applicable industry codes and regulations. 10. Support operator training, operations readiness activities, and knowledge transfer to operations and maintenance teams. 11. Prepare and maintain commissioning reports, test records, punch lists, and system handover documentation. 12. Provide technical leadership and guidance to commissioning personnel and project stakeholders throughout project execution and start-up.

-Having valid Indonesia ID - Having the minimum 5-10 years of working experience for Oil and Gas industries for the sampe position - Having the experience of working at LNG - Having the knowledge and understanding of Maintenance and Integrity build -Having the experience at the same position for the last 5 years - Have a good plan, coordinate, and execute pre-commissioning, commissioning, start-up, performance testing, and handover activities.
Location : Papua, Indonesia
Language / Level :
English : D-Full professional proficiency

2026-45124 - Operation Readiness Manager M/F

Mon, 26 Oct 2026 02:53:47 Z

Contract type : Fixed-term-contract
Position description :
1. Lead and coordinate Operations Readiness activities to ensure operational and maintenance requirements are delivered in line with project objectives and schedules. Serve as the primary interface between Project, Operations, Maintenance, Commissioning, and Start-up teams. Manage the development and implementation of operational procedures, maintenance strategies, integrity programs, spare parts planning, and training requirements. Support commissioning, start-up, and operational handover activities to ensure a safe and efficient transition from project execution to operations. Ensure operational requirements are integrated throughout engineering, procurement, construction, commissioning, and start-up phases. Monitor readiness progress, identify risks and gaps, and implement corrective actions to achieve project milestones. Coordinate stakeholder engagement and facilitate alignment between project and operational teams. Ensure compliance with project requirements, company standards, and applicable HSE and regulatory requirements. Provide leadership and guidance to support successful operational integration and sustainable asset operation.

-Having valid Indonesia ID - Having the 15 years of working experience for Oil and Gas industries (Not necessary to be in owner side experience.) - Having the experience of working as EPC contractor - Having the knowledge and understanding of Maintenance and Integrity build -Having the experience at the same position for the last 10 years - Understand procedure deployment, start-up assistance, spares parts, maintenance and integrity build, training & operation integration
Location : Papua, Indonesia
Language / Level :
English : D-Full professional proficiency

2026-44866 - Project Control Engineer M/F M/F

Sun, 18 Oct 2026 22:15:31 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : Project Control Engineer JOB PURPOSE The Project Control Engineer supports the Senior Project Control Engineer in planning, monitoring, and controlling Project cost, schedule, and progress performance across Major Projects, ensuring alignment with contractual obligations, Project objectives, and Company standards. The role assists in analyzing Project schedules, forecasts, and progress reports, enabling accurate tracking of Project performance and supporting informed decision-making. In addition, the role-holder is responsible for promoting, adhering to, and ensuring compliance with QAFCO’s Occupational Health & Safety, Environmental, Energy, and Quality management systems and standards, while coordinating effectively with other Project Team members to ensure successful Project delivery. KEY ACCOUNTABILITIES Management Systems · Awareness of QAFCO Integrated Management Systems (Quality; Environment; Occupational Health & Safety; Responsible Care; & Energy Management Systems and IFA Product Stewardship) · Comply with all the relevant policies and procedures of QAFCO Integrated Management Systems Ensure that QAFCO and Project HSEQ requirements take the highest priority and actively implemented in Project day-to- day activities. Project Planning & Scheduling Ensure that the Contractor develops and maintains Project schedules covering engineering, procurement, construction, commissioning, and handover phases in full compliance with EPCC Contract requirements. Oversee EPCC Contractor’s performance of critical path analysis, float management, and schedule optimization to ensure timely delivery of project milestones. Coordinate with discipline leads and contractors to ensure alignment of detailed schedules with the overall project timeline. Lead the development of baseline schedules, including resource loading. Monitor progress against baseline and forecast schedules, identifying delays and recommending recovery plans. Implement and manage planning tools and ensure consistent use across all stakeholders. Progress Monitoring & Reporting Track and report physical progress, earned value, and schedule performance. Prepare and present weekly/monthly progress reports, dashboards, and executive summaries for senior management and stakeholders. Coordinate with contractors to review and validate monthly progress reports and updates. Support the preparation of Steering Committee presentations, highlighting key risks, achievements, and deviations. Maintain accurate and auditable records of planning data, progress curves, and performance trends. Cost & Resource Planning Ensure EPCC Contractor develops resource histograms, manpower plans, and productivity tracking. Assist in forecasting cost impacts of schedule changes and delays. Provide input for budget planning, cash flow projections, and cost control

Bachelor’s degree in Engineering (Mechanical, Chemical, or related discipline). Professional certification in project management or controls (e.g., PMP, CCP) is preferred. Minimum 10 years of experience in project controls within major projects, preferably in fertilizer or petrochemical plants. Proven expertise in planning and coordinating integrated activities for onshore field equipment. At least 3–5 years of experience on large-scale projects (EPCC or similar). Skills & Competencies: Fluency in English (written and spoken). Strong interpersonal and organizational skills. Advanced computer literacy and proficiency in Microsoft Office Suite. Familiarity with project control software (e.g., Primavera P6, MS Project) is an advantage.
Location : Doha
Language / Level :
English : C-Professional working proficiency

2026-42133 - MAINTENANCE PLANNING ENGINEER MECHANICAL M/F

Fri, 16 Oct 2026 22:05:15 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : MAINTENANCE PLANNING ENGINEER MECHANICAL - Prime responsibility for carrying out the planning of daily maintenance activities with primary responsibility to ensure ‘right-first-time’ job performance so that equipment reliability is maximized, while improving maintenance ‘tool time’ ,’work quality’ by anticipating and eliminating potential delays through planning and coordination of labor and non-labor resources including materials and services. - The role is expected to be able to remove uncertainty to execute planning in a systematic, efficient and economical way with forecasted maintenance job planning approach. - He or she should be able to independently develop cost and time estimates of planned maintenance work to meet budgets and schedules. - Planning Engineer shall have Competency and work experience in SAP Maintenance module, preferably in SAP S4-HANA including order planning, Purchase requisition, service entry sheets, call-off orders, service orders, Maintenance related Master data creation, updation, deletion etc. Routine maintenance job planning - Establish, maintain and improve the Maintenance Plans within the area of responsibility - Develop equipment preventive maintenance schedule. - Based on the daily new work request from production, Planning engineer shall prepare detailed activity break up along with the estimation of required resources for the job i.e. internal and external manpower, materials and services. - Preparing work pack for each work order. - Coordinate and review the work plan for assigned maintenance activities; review and evaluate planned work, methods , procedures and oversee spare parts inventory. Contract Handling - Participate in maintenance contracts handling including scope development, specifications, initiating procurement process, technical evaluation and provide support to superiors for management approval process as and when required. - Day to day coordination with contractors to supply manpower and/or services based on requirement during daily work order planning. - Verify and process the invoices submitted by the contractor. Spares and Materials management - Communicate and Co-ordinate with end-users to ensure spares and materials are made available by Planning Engineers for schedule activities. Also provide feedback to MRP so that cost-effective replenishment levels are maintained. - Updating the item master including item specifications, Bill of Material, Spare Parts Criticality and new item codes in ERP as and when required. - Responsible for the Periodic Inventory review & Changes in the buffer stock levels with the coordination of end-users. - Co-ordinate with Supply Chain department and Contractors for procurement of spares to ensure the availability.

Bachelor’s Engineering degree (12+4 years) in (Mechanical ) 10 years relevant experience in Oil & Gas/Petrochemical/Fertilizer industry and competency* Hands-on experience of the Work order part of EAM (enterprise asset maintenance) module of SAP would be preferable. Competency and work experience in ERP – SAP, preferably in SAP S4-HANA including Competency and work experience in Maintenance related Master data creation, master data updating, master data deletion etc in SAP. 1. Strong technical background and maintenance field experience. 2. Experience in daily maintenance planning. 3. SAP ( Master data- Establishment PM plans, creation of equipment, Functional location, BOM, Material Catalogue). 4. Experience in technical evaluation and spare parts management. 5. Experience in contract establishment. You are fluent in English with both written and verbal communication You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.
Location : Mesaid
Language / Level :
English : C-Professional working proficiency

2026-45052 - PLC Supervisor* M/F

Fri, 16 Oct 2026 06:53:29 Z

Contract type : Fixed-term-contract
Position description :
Main activities: Maintain, operate, modify and perform routine tasks on the PLCs, HMIs, automation computers and Unit Control Panels (UCP) Carry out modifications on both hardware (input, output, communication cards etc) and software (control and safety logic, sequence logic etc) of all systems (compressors, pumps, oil & gas metering system, High Integrity Pressure Protection System (HIPPS), Tank Gauging System (TGS), Power Distribution Control System (PDCS), Telemetry System, machine monitoring system etc), under his responsibility as may be required, requested or directed by COMPANY. Prepare with the Control System Specialist, preventive and corrective actions and modifications of the systems under his responsibility. Manage and document in technical reports, interventions using the CMIMS and work packs provided by the planning team. Follow up the parameter values and alarms in the concerned systems under his responsibility and perform trouble shooting if required. Control and apply inhibits in the systems as directed and controlled by COMPANY rules and procedures. Maintain an accurate and auditable log of all system faults and inhibits (Short term and long term). Identify, in the preparatory stage of maintenance works, any sensitive operation and ensure that a proper assessment of the risks involved is carried out beforehand, Identify recurrent corrective maintenance interventions, analyse them and suggest improvements, as well as problems related to availability, quality and obsolescence of spare parts. Track any backlog of work in area of responsibility and suggest corrective measures to COMPANY and CONTRACTOR to improve the management of the backlog. Review and assure that all Software Modifications and corrective actions are validated by COMPANY and all impacted documentations are updated after implementation. Quality Assurance: Verifies the quality of his planning by frequent checks of supervisor reports in CMMS Ensures all work loadings per discipline are balanced and achievable and highlights immediately to COMPANY any workload which is unachievable with the resources provided onboard. HSE Commitment: Demonstrate personal commitment to the HSSE policy of the Company Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards

The holder of this position must have the following qualifications: Bachelor's Degree in Enginering or equivalent degree, 10+ years’ experience in the field of control system and at least 3 years as PLC Supervisor in Oil and Gas / Petrochemical industry, English fluency mandatory, knowledge of French & Portuguese language recommended Specific Knowledge: Advanced skill in PLC´s - SIEMENS (S5 an added advantage) & Yokogawa Industrial Automation Systems, Panels and HMI´s. Advantage if experienced in Emerson Delta V, Rockwell/Allen-Bradley, Emerson Pride in his work, ability to maintain good relations with colleagues and others, Highly Proactive individual Physical ability to work on offshore installations in the climatic conditions of the site,
Location : Offshore
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency
Language / Level :
Portuguese : C-Professional working proficiency

2026-45051 - CMMS Planner* M/F

Fri, 16 Oct 2026 06:52:08 Z

Contract type : Fixed-term-contract
Position description :
Main activities: Prepares on site the maintenance and inspection operations within CMIMS (SAP) Plans maintenance and inspection operations (routine and short-term) taking into account the spare parts and resourcesReview of Notifications and Attribution of the Trade Attribution of operation to Long term and short term planning Review of the Operations priorities Creating work orders Identification of Work orders with revision code Follow-up of the planning of work orders short term and preventive maintenance Follow-up of parts orders for Short term Work orders Plans Short term corrective Work orders and Preventve maintenance Work orders Coordinate maintenance operations managed by GMC:Make sure that material requested by onshore fit with site material (if necessary request to update the BOM) Check availability of spare parts with Preparators assitance for the one which are stored onshore Dispatch preparation work between onshore and offshore (PTW, spare parts, lifting,etc...) and ensure the follow up. Gather the preparation works to ensure correct execution and follow up. Follow-up material delivery onsite and inform onshore and supervisors Follow-up of reporting into SAP by supervisors by continuous reminders and support in the reporting activities Check and comments activities prepared onshore by preparation team including PTW and reverts with comments if necessary Integrate PTW prepared offshore into the site planning by participating to PTW meeting for submission and recovery of permits Assist preparation team in clarification of notifications for activities to be prepared urgently onshore Follow closely Critical maintenance activities In collaboration with the Trade Supervisor, he prepares interventions Takes part in daily, weekly and coordination meetings on site Ensures the Accurate and timely closeout of all CMIMS Work Orders and ensures accurate and adequate history in the activity reports. Keeps track of any backlog of work in his area of responsibility and suggests corrective measures to the CSR if this backlog threatens to become unmanageable, Quality Assurance: Verifies the quality of his planning by frequent checks of supervisor reports in CMMS Ensures all work loadings per discipline are balanced and achievable and highlights immediately to COMPANY any workload which is unachievable with the resources provided onboard. HSE Commitment: Demonstrate personal commitment to the HSSE policy of the Company Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards

The holder of this position must have the following qualifications: Bachelor's Degree in Enginering or equivalent degree, +5 to 10 years’ experience in the Planning of maintenance activities on oil and gas production installations, Fully conversant with SAP/R3 Fully conversant with PRIMAVERA P6 English fluency mandatory, knowledge of French & Portuguese language recommended Ability to Coach, Mentor and advise, motivate multi-national teams Pride in his work, ability to maintain good relations with colleagues and others, Highly Proactive individual Physical ability to work on offshore installations in the climatic conditions of the site,
Location : Offshore
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency
Language / Level :
Portuguese : C-Professional working proficiency

2026-45045 - CBM Supervisor* M/F

Thu, 15 Oct 2026 08:00:04 Z

Contract type : Fixed-term-contract
Position description :
Main activities: Contributes to the building of Methods and Support activities within the Maintenance entity. Carries out CBM vibration surveys on site and issues reports accordingly. Follows up with site to ensure that all actions arising from the CBM Surveys are promptly closed Carries out Lube Oil sampling as per the planning, performs laboratory analysis of the samples as required and issues reports accordingly. Advises site on the outcome of the Lube Oil analysis and the actions required to be carried out to ensure equipment availability. Reviews and advises and follows up on the acceptable process for Lube Oil management on site. Carries out gas leak investigation/surveys on sites and makes estimates of the leakage rates of valves. Also, develops the action plan to close out the leaks on the concerned valves. Assists in vibration analyses and other analyses including all methods related activites as required. Maintains close liaison with the RCM Specialist and Maintenance Discipline Methods Engineers to monitor and follow up actions arising from the results of CBM measurement campaigns. Follows up with site on all the corrective actions recommended following analyses to ensure that they are properly implemented. Visits site whenever the need arises and physically assists to carry out specialized activities following from CBM results (balancing, alignment, rotor axial position adjustment, proximiter gaps setting, etc.…) Issues regular CBM reports as considered necessary to show the health status of big machinery and to highlight pending problems. Takes the ownership on all CBM tools on sites and at base, and acts to ensure their proper usage and safekeeping. Carries out infra-red thermography campaigns on electrical switchboards and ensures the timely execution and report interpretation. Follows up with site on the corrective actions arising therefrom. Follows up the Condition Based Monitoring of electrical motors, collects and reviews data, and liaises with the RCM Specialist and Maintenance Discipline Methods Engineer to engage responsible Contractors for the interpretation of results and recommendation of solutions to equipment issues. Carries out borroscope inspection on turbogenerators when required and issues reports. Follow up SAP Work Orders to ensure proper preparation, close out and reporting on all CBM related actitives on site Assists in any other way considered necessary in his capacity, to support the maintenance team objective to ensure efficient site support and good availability and reliability of rotating equipment. HSE Commitment: Demonstrate personal commitment to the HSSE policy of the Company Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards

The holder of this position must have the following qualifications: Bachelor's Degree in Enginering, Vibration ISO Cat II Certification, based on the ISO 18436-3 Ability to use sensors and other monitoring equipment to collect data on the performance of equipment (Infrared thermography / Vibration monitoring / Oil analysis / Ultrasonic analysis / Pressure analysis / Electrical analysis) +10 years’ experience minimum in the maintenance field on oil and gas production installations, 5 years experience in Condition Based and Predictive Maintenance Experience in maintenance support and especially in field maintenance capacity Good knowledge or CBM tools (OROS, Bentley Nevada, OneProd, Allen Bradley, etc...) Good knowledge of planning tools, and of CMIMS tools (preferably SAP based) Fluent in English, knowledge of French & Portuguese language recommended Physical ability to work on offshore installations in the climatic conditions of the site,
Location : Offshore
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency
Language / Level :
Portuguese : C-Professional working proficiency

2026-45044 - Instrument Specialist* M/F

Thu, 15 Oct 2026 07:59:00 Z

Contract type : Fixed-term-contract
Position description :
Main activities: Ensures that COMPANY's HSE regulations are respected. Ensures the planning, preparation, scheduling, coordination, and execution of preventive and corrective maintenance activities within his area of responsibility, while considering production constraints and ensuring the availability of required resources, materials, and spare parts, Oversees and ensures the effective maintenance, monitoring, troubleshooting, and restoration of Instrumentation and Control Systems, utilities, and equipment under his responsibility to maintain operational reliability and availability. Uses and maintains CMMS data, intervention reports, and inventory information to manage maintenance activities, monitor performance, prepare technical reports, and drive continuous improvement in safety, reliability, equipment preservation, and cost optimization. Coordinates with third-party vendors for troubleshooting, repair, and refurbishment activities, ensures proper feedback following interventions, and identifies opportunities for equipment and installation improvements. Ensures that the transfer of knowledge by mentoring occurs properly within his teams. Carries out, at the COMPANY request, any intervention within his field of competence. Methods Provide support in repair, installation, and commissioning Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance programs and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Quality Assurance Verifies the quality of his teams’ interventions by frequent on-site checks, Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.

The holder of this position must have the following qualifications: Bachelor's Degree in Control & Instrumentation Engineering, Control Systems Engineering, or a related Engineering discipline +15 years’ experience minimum in the maintenance field on oil and gas production installations Good knowledge of Instrumentation and Control Systems (PFD and P&ID diagrams, Instrument list and I/O list, Specifications and data sheets, Valve, relief valve and pressure reducing valve calculations, Layout and routing plans, Assembly standards, Equipment parts lists, Terminal block and BJ plans, Grouping cabinet plans, Control room and technical room layout plans, Loop diagrams, Interconnection diagrams) SAP/R3 experience and know-how Physical ability to work on offshore installations in the climatic conditions of the site, Working language: English Fluent in English, knowledge of French & Portuguese language recommended Strong leadership, reliability and work confidentiality.
Location : Offshore
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency
Language / Level :
Portuguese : C-Professional working proficiency

2026-45042 - Mechanical Specialist* M/F

Thu, 15 Oct 2026 07:57:25 Z

Contract type : Fixed-term-contract
Position description :
Main activities: Organizes the mechanical maintenance operations on site, Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. Assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Manage the maintenance all mechanical equipment (Gearboxes, Pumps, Compressors, Gas compressor, Cranes, Accumulators, heat exchangers, Fans, Lifeboats, Liferaft, Diesel generators SDG/EDG, Firefighting package, Strainers & filters). Troubleshooting and repairing malfunctions in mechanical systems, Air compressors, Gas lift compressor, Water injection systems, Cranes, pumps, etc. Reading and interpreting drawings, blueprints, and schematics. Asset Care routine to ensure PM/CM close-out and Integrity of Asset maintained. Methods Provide support in repair, installation, and commissioning Analyses indicators provided by the CMMS, stock management and intervention reports with a view to improving maintenance in his area (HSE, availability, preservation of equipment, optimization of costs), Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance programs and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Quality Assurance In addition to audits and reviews as above mentioned he participates in periodic meetings with GMC and SMC to ensure proper surveillance. Also, designs, follows-up and optimizes maintenance concepts in close cooperation with the GMCs and SMCs.

The holder of this position must have the following qualifications: Bachelor Degree in Mechanical Engineering +15 years’ experience minimum in the maintenance field on oil and gas production installations Good knowledge of Gearboxes, Gas compressor, Cranes, Accumulators, heat exchangers, Fans, Lifeboats, Liferaft, Diesel generators SDG/EDG, Firefighting package, Strainers & filters, Pumps (Centrifugal, Diaphragm, Piston, Gear, Peristaltic, Dosing, Lubrication pumps), Compressors (Piston, Scroll, Screw, Centrifugal, Vane compressors) SAP/R3 experience and know-how Physical ability to work on offshore installations in the climatic conditions of the site, Working language: English Bright 3.5 (or equivalent) Fluent in English, knowledge of French & Portuguese language recommended Strong leadership, reliability and work confidentiality.
Location : Offshore
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency
Language / Level :
Portuguese : C-Professional working proficiency

2026-44867 - Workshop Safety Officer M/F

Tue, 06 Oct 2026 22:17:23 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : Workshop Safety Officer Reporting & Context Field-based role operating within machine shop and fabrication areas in an Oil & Gas or manufacturing environment (GCC). Full-time field presence — 8 hours/day, 6 days/week. Job Purpose Ensure safe operations across workshop and fabrication areas through rigorous field safety activities, hazard identification, permit auditing, and enforcement of safety standards and procedures. Key Accountabilities Machine & Equipment Safety: Enforce machine guarding standards (fixed, interlocked, adjustable barriers); manage LOTO procedures during maintenance/repair; oversee point-of-operation hazard controls for cutting, shearing, and shaping activities. PPE Management: Ensure correct use of specialized PPE; enforce compliance with workshop-specific safety instructions (Eye Protection Policy, LOTO, etc.). Accident Prevention: Conduct toolbox meetings; participate in Job Safety Analysis; report incidents in HSEQ Synergi system; participate in incident investigations; produce incident reports; follow up on corrective actions. Safety Inspections & Hazard Identification: Perform daily safety tours covering machine shop interiors/exteriors (manual lathes, welding bays, tool rooms); monitor machine operators and technicians for unsafe practices (interlock bypassing, improper tool use); participate in scheduled and unscheduled safety walks. Permit Auditing: Audit Hot Work and Maintenance Permits for adequacy; report deviations related to fire safety or equipment isolation to the company representative. IMS Compliance: Ensure all activities comply with applicable HSEQ standards and company safety regulations.

Education & Experience NEBOSH Diploma with valid NEBOSH IGC Certificate, or Diploma in Industrial Safety Engineering from a recognised institution. 3–5 years of experience in electrical, welding, instrument, and machine shop safety (GCC-based, Oil & Gas or manufacturing sector). Technical Competencies Demonstrated expertise in machine guarding, LOTO procedures, point-of-operation safety, and PPE management. Ability to conduct field inspections, safety audits, and permit reviews in high-risk workshop environments. Behavioural & Language Requirements Proficiency in English (read, write, speak). Computer literate. Field-oriented profile capable of sustained 8-hour daily operational presence.
Location : Doha
Language / Level :
English : C-Professional working proficiency

2026-44954 - MECHANICAL SUPERVISOR* M/F

Tue, 06 Oct 2026 10:32:02 Z

Contract type : Fixed-term-contract
Position description :
Operations Organises on site the maintenance operations which are placed under his responsibility. With his teams assists specialists on the organisation and coordination of the work. Ensures that the COMPANY’s HSE regulations are respected, especially procedures related to Work Permits, as well as approved operating procedures and standard industry practice during preparation and performance of maintenance operations placed under his responsibility. Monitors the functioning of utilities and equipment placed under his responsibility. Takes part in daily, weekly and coordination meetings on site. Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself. Manages the team of technicians directly under his responsibility. Methods Identifies, in the preparatory stage of maintenance works, any delicate operations and ensures that proper studies of the risks involved are carried out beforehand. Warns support teams of any recurring problems related to the availability or quality of spare parts. Suggests improvements and requests modifications. Quality Assurance Verifies the quality of his teams’ interventions by frequent on-site checks. Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.

5 to 10 years’ experience in the maintenance field on oil and gas production installations. Basic knowledge of the process of oil and gas treatment installations and a thorough knowledge of the equipment used in oil and gas treatment installations. Specific Professional Knowledge CMMS: SAP R3 is an advantage. Mechanical: turbines (LM2500, FRAME V, MARS/CENTAUR, SOLAR, etc.) – compressors (THERMODYN) – pumps (FLOWSERVE, SULZER). Electrical: high voltage cells, generators, UPS. Instrumentation: Nothing special. Other Requirements Ability to lead and motivate multi-national teams. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Languages: English necessary, French and Portuguese an advantage.
Location : BLOCK 17
Language / Level :
English : D-Full professional proficiency

2026-43390 - CCR Operator M/F

Fri, 02 Oct 2026 22:07:41 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy, Doha, Qatar for a : CCR Operator Job Purpose: Monitoring and controlling all oil and gas production and utility systems to ensure that production and environmental targets are achieved. Acting as a member of the Offshore Emergency Response Team in the event of an incident to ensure minimal harm to personnel, environment and asset Contributing to the development and review of risk assessments to ensure that hazards have been identified, adequate mitigations are in place and risk has been reduced. Your main duties will be to: Assist the Production Supervisor in safe delivery of core business through active management of production tasks and core operational activities. Act as a Permit Controller to ensure that all works are carried out in accordance with the Permit to Work process and company requirements Provide the Production Supervisor with analysis and comment on production volumes, opportunities and risks in order to improve business performance. Provide visible leadership to personnel to ensure production targets are met and production / rejection volumes are maximized Promote NOC core values by being a safety role model, showing trust, respect and commitment, fostering collaboration across the organization Promote cost consciousness in order to embed a strong cost culture Drive an incident free environment by establishing and maintaining a strong incident free culture Actively participates in and promotes company health and safety campaigns, policies and procedures, that ensures personal safety and that of colleagues at all times Ensure compliance with Operating Procedures and Guidelines to ensure Process Safety, Operational Safety and Plant Integrity.

Ideally, you will have graduated with minimum Higher Secondary School Education plus a three-year technical diploma (HNC, HND or equivalent). Relevant Work Experience: Minimum of 10 years of experience with at least 5 years offshore level on-field equipment in diversified oil & gas processing or petrochemical plants. You are fluent in English with both written and verbal communication You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.
Location : Doha
Language / Level :
English : C-Professional working proficiency

2026-44821 - Senior Power System Study Engineer M/F

Wed, 23 Sep 2026 10:20:33 Z

Contract type : Fixed-term-contract
Position description :
• Ability to discuss technical matters directly with client and defend engineering conclusions based on sound technical analysis. • Strong contract awareness and ability to distinguish contractual requirements from client preferences. • Ability to prevent overengineering and effectively push back on excessive or non-contractual client requests. • Ability to prepare concise and technically robust submissions to facilitate client review and approval. • Ability to develop engineering justification packages for temporary power systems and tie-ins to permanent facilities.

• More than 10 years of experience as an Electrical System Engineer for power system study. • Proven ETAP experience, including completion of at least one project. • Experience preparing, reviewing, and submitting Load Flow, Short Circuit, Earthing, and Relay Coordination Studies as project deliverables. • Familiarity with: - Load Assessment - Load Flow Studies - Short Circuit Studies - Protection Coordination Studies - Earthing / Grounding Verification - Relay and MCCB Setting Validation - Backfeed and Isolation Philosophy Reviews • Experience in brownfield projects and live-plant modifications is highly desirable. • Experience supporting approvals for temporary power connections and temporary-to-permanent facility tie-ins. • Immediate requirement for an initial 3-6 month “office” assignment, with potential extension depending on project needs and performance.
Location : South Jakarta, South Jakarta City, Jakarta, Indonesia
Language / Level :
English : E-Native or bilingual proficiency

2026-44820 - Electrical Responsible Person / Electrical Superintendent M/F

Wed, 23 Sep 2026 10:13:02 Z

Contract type : Fixed-term-contract
Position description :
- Capable of leading commissioning and energization activities for switchgear, transformers, MCCs, UPSs, generators, and power distribution systems. - Good understanding of protection systems, relay testing, and power system operation. - Coordinate with Operations, Construction, Commissioning, Engineering, and HSE teams. - Demonstrated leadership and stakeholder management capability. - Preparing and approving electrical isolation and energization procedures.

- 10+ years of experience in electrical construction, commissioning, start-up, and plant operations. - Proven Electrical Superintendent experience in oil & gas, LNG, petrochemical, or power projects. - Strong background in electrical safety management, including LOTO, electrical isolation, PTW, and energization control. - Experience preparing and approving electrical isolation and energization procedures. - Expected “field” assignment duration: approximately 1-2 years (9 weeks on / 3 weeks off rotation), with possible extension.
Location : South Jakarta, South Jakarta City, Jakarta, Indonesia
Language / Level :
English : E-Native or bilingual proficiency

2026-44723 - Senior Contract Engineer M/F

Tue, 22 Sep 2026 22:20:26 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Doha Senior Contract Engineer Job Purpose To support the effective planning, tendering, negotiation, and administration of contracts for offshore and onshore maintenance activities, ensuring optimized production uptime, cost efficiency, compliance with company policies, and effective risk management within oil & gas operations. Contract Strategy & Tendering Work closely with the DUET counterpart to prepare contract dossiers and define contractual responsibilities. Participate in the validation and implementation of contract strategies. Conduct market surveys and maintain an up-to-date database of qualified contractors, suppliers, and potential bidders. Analyze market responses and assess contractor capabilities. Arrange, coordinate, and participate in Contracts Committee meetings. Pre-qualify bidders and develop bidder lists for tendering activities. Define target prices and establish commercial evaluation criteria. Prepare and issue Call for Tender (CFT) documentation to contractors and suppliers. Create and manage commercial tender documents in accordance with company procedures. Contract Evaluation & Negotiation Analyze commercial bids and support technical-commercial evaluations. Participate in contract negotiations with suppliers and contractors. Prepare recommendations for contract awards and present findings to management and committees. Ensure commercial risks are identified and properly managed throughout the contracting process. Contract Administration Ensure all contractual obligations and deliverables are properly managed and monitored. Maintain and update contract management systems and tools. Monitor contractor performance and contract KPIs. Support the administration of frame agreements (FALTC) and other long-term contractual arrangements. Ensure contractual compliance with company policies, procedures, and regulatory requirements. Insurance & Risk Management Ensure insurance requirements related to company personnel, assets, and contractors are properly addressed. Contribute to risk assessments related to maintenance and contracting activities. Support risk mitigation initiatives throughout the contract lifecycle. Continuous Improvement Keep informed of industry best practices and developments in contract management. Propose and implement improvements to contracting processes and procedures. Share lessons learned and contribute to continuous improvement initiatives within the Contracts & Procurement function.

Bachelor's Degree in Business Administration, Commerce, Law, Engineering, Science, or related discipline. Alternatively, Higher Secondary School Education with a three-year Technical Diploma (HNC, HND, or equivalent) may be considered with extensive relevant experience. Minimum 8 to 12 years of postgraduate experience in Contracts and Procurement within the Oil & Gas, Petrochemical, or Energy industry. Minimum 2 years of experience as a Contracts Engineer or equivalent position. Experience in offshore maintenance contracts is preferred. Knowledge of tendering, contract negotiation, administration, and supplier management practices. Technical Competencies Advanced knowledge of Contracts & Procurement (C&P) processes. Strong understanding of commercial bid analysis and contract negotiation. Advanced competency in contracts technical disciplines. Advanced certification in C&P tools and contract management systems is preferred. Proficient in Microsoft Office applications and contract management software. Personal Skills Strong analytical and problem-solving abilities. Excellent planning, organizing, coordinating, and control skills. Effective stakeholder and relationship management capabilities. Good communication, negotiation, and presentation skills. Ability to work in multicultural and international environments. Language Requirements Fluent in English, both written and spoken. International Experience International and multicultural working experience is preferred SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities
Location : Doha
Language / Level :
English : C-Professional working proficiency

2026-44783 - TAR Lifting Engineer M/F

Sat, 19 Sep 2026 16:26:08 Z

Contract type : Fixed-term-contract
Position description :
Planning Phase · Develop detailed lifting plans in accordance with project requirements and site regulations. · Prepare lifting studies and lifting method statements. · Define crane requirements and lifting equipment specifications. · Plan lifting activities for: o Equipment installation and removal o Material handling o Scaffolding materials o Temporary facilities o N2 spread equipment o Tools and consumables o Truck loading and unloading operations · Coordinate lifting requirements with Operations Support Supervisors and Construction teams. · Define laydown and staging areas. Site Preparation Phase · Verify lifting routes and lifting locations. · Confirm crane access and setup required materials for crane access. · Conduct field assessment and lifting feasibility studies. · Coordinate mobilization of cranes and lifting equipment. · Review lifting risks and mitigation measures. TAR Execution Phase · Support lifting operations on site. · Verify compliance with approved lifting plans. · Coordinate crane utilization and lifting schedules. · Monitor critical and heavy lift activities. · Provide technical support to field supervisors and lifting crews. · Ensure lifting activities are executed safely and efficiently. Close-Out Phase · Support demobilization of lifting equipment. · Review lifting performance and lessons learned. · Assist in preparation of final lifting reports.

· Experience in refinery, LNG, petrochemical, offshore, or oil & gas shutdown projects. · Demonstrated experience in lifting engineering and crane lifting. · Knowledge of lifting standards and safety regulations. · Experience preparing lifting plans and lifting studies over the 15 years. · Strong field coordination and problem-solving skills. The TAR Lifting Engineer is responsible for planning, reviewing, and coordinating all lifting activities required during TAR. The role develops lifting plans to ensure safe and efficient movement of materials, equipment, scaffolding, temporary facilities, tools, and operational support resources throughout all project phases.
Location : South Jakarta, South Jakarta City, Jakarta, Indonesia
Language / Level :
English : E-Native or bilingual proficiency

2026-44781 - TAR Operation Support Deputy Lead M/F

Sat, 19 Sep 2026 16:23:23 Z

Contract type : Fixed-term-contract
Position description :
Planning Phase (Jakarta Office) · Review Client-issued Isolation and De-Isolation Plans (IDP). · Support development of detailed TAR execution plans. · Coordinate manpower requirements, heavy equipment, tools, and consumables. · Support subcontractor mobilization planning. · Coordinate procurement of materials including gaskets, bolts, nuts, hand tools, and operational consumables. · Participate in schedule development and resource optimization. Site Preparation Phase · Verify field conditions against approved plans. · Identify discrepancies between engineering plans and actual site conditions. · Support revision of plans where required. · Coordinate preparation activities including scaffolding, lifting equipment, temporary facilities, access arrangements, lighting systems, and N2 spread deployment. · Ensure readiness for TAR execution. TAR Execution Phase · Support day-to-day operation support activities during shutdown execution. · Coordinate with Client’s Operations personnel and supervisors. · Monitor subcontractor performance and work progress. · Assist in execution of valve isolation, positive isolation installation/removal, nitrogen purging, steaming, and system reinstatement activities. · Support shift operations as the back-to-back counterpart of the Operation Support Lead. · Ensure work activities are executed safely and in accordance with approved procedures. Close-Out Phase · Support de-isolation activities. · Coordinate return of temporary equipment and tools. · Support site clean-up and demobilization activities. · Assist preparation of final reports and lessons learned.

· Experience in refinery, petrochemical, LNG, gas processing, or offshore shutdown/turnaround projects. · Familiarity with isolation management and operational support activities. · Experience managing a team of over 50 personnel. · Experience managing subcontractors and site resources. · Strong coordination and communication skills. · More than 10 years of management experience in the oil and gas field. The Operation Support Deputy Lead will support the TAR Operation Support Lead in planning, preparation, execution, and close-out activities for Shutdown event. The role is responsible for coordinating manpower, equipment, materials, subcontractors, and operational support activities in accordance with the Client’s Isolation and De-Isolation Plans (IDP). During the TAR execution phase, the Deputy Lead acts as the Operation Support Lead's back-to-back partner and supports shift operations to ensure safe and efficient execution of TAR activities.
Location : South Jakarta, South Jakarta City, Jakarta, Indonesia
Language / Level :
English : E-Native or bilingual proficiency