RSS export of vacancies - Only featured vacancies : No / Region : Africa / Country : Europe-->France

2026-43268 - PSV Senior Technician M/F

Fri, 08 May 2026 22:29:57 Z

Contract type : Fixed-term-contract
Position description :
SPIE Services Nigeria Limited is currently looking for a PSV Senior Technician to join its work force in Nigeria. He/She shall be responsible for the safe inspection, testing, maintenance, and certification of all Pressure Safety Valves across upstream, midstream, and downstream facilities in compliance with DPR/NUPRC regulations, API standards, and company HSE policies. You protect lives, assets, and production continuity in a high-risk environment. Key Responsibilities Maintenance & Repair Strip down, clean, lap seats, replace springs, bellows, and O-rings on valves from brands like Crosby, Anderson Greenwood, Leser, and Farris Execute emergency repairs during unplanned shutdowns to avoid flaring penalties Testing & Certification Perform statutory PSV testing and recertification intervals as mandated by NUPRC Guidelines and API 576 - typically every 12-36 months depending on service Conduct bench testing and in-situ testing using deadweight testers and portable pop testers on FPSOs, flow stations, refineries, and gas plants Stamp and issue PSV certification tags acceptable to NUPRC and third-party inspectors HSE & Regulatory Compliance Ensure 100% compliance with DPR Safety Regulations 1997 and NMDPRA requirements Complete Permit to Work (PTW), JSA, and Toolbox Talk documentation before any job

Minimum ND/HND Mechanical Engineering from NBTE-accredited polytechnic. B.Eng preferred for IOC roles API 510 or API 570. BOSIET + HUET for offshore roles. COREN registration is an advantage 8-10 years in oil & gas, with 6 years minimum on PSV maintenance. FPSO/LNG experience is a plus
Location : Offshore - Lagos
Language / Level :
English : C-Professional working proficiency

2026-43266 - Senior CBM Technician M/F

Fri, 08 May 2026 22:29:55 Z

Contract type : Permanent contract
Position description :
SPIE Services Nigeria Limited is currently looking for Senior CBM Technician to join its work force in Nigeria. KEY RESPONSIBILITY: Rotating Equipment ExpertisePumps, compressors, motors, turbines Bearing and seal maintenance Alignment and balancing techniques Vibration AnalysisData collection and interpretation Use of vibration monitoring tools (e.g., CSI, SKF, Bently Nevada) First-level diagnostics and reporting Infrared ThermographyThermal imaging for electrical and mechanical systems Identifying hotspots, insulation issues, and sand levels in vessels Lubrication & Oil AnalysisOil sampling procedures Understanding of oil properties and contamination indicators Familiarity with oil analysis software and databases Condition Monitoring SystemsPI System (OSIsoft) or similar platforms Real-time data interpretation (temperature, pressure, vibration) Mechanical Maintenance & TroubleshootingHands-on repair and refurbishment (e.g., bearing/motor replacement) Use of hand and power tools Reading mechanical drawings and P&IDs

Minimum of 5 years' experience in the maintenance field on offshore oil and gas installations. Higher National Diploma or Higher qualification in Mechanical/Production Engineering Ability to perform detailed vibration collection and analysis, download the data into the vibration database, realize first level of analysis of results, send a monthly backup to onshore for detailed analysis and follow achievement of Company's approved vibration corrective actions Ability to carry-out and interpret thermography survey, perform daily monitoring of Pump & Turbines condition (temperature, performance, vibration etc.) with the online process data (Pl) and suggest corrective actions to avoid failures Knowledge of Spectrographic (oil analysis).
Location : Offshore
Language / Level :
English : E-Native or bilingual proficiency

2026-43265 - HVAC Senior Technician M/F

Fri, 08 May 2026 22:29:53 Z

Contract type : Fixed-term-contract
Position description :
SPIE Global Services Energy is looking to strengthen its workforce in Nigeria by recruiting experienced HVAC Senior Technician to join our offshore operations team. Key Responsibility: Maintenance & Repair Service and repair HVAC for control rooms, switchgear rooms etc. Maintain positive pressure systems in control rooms to prevent hydrocarbon gas ingress per IECEx/ATEX standards Overhaul chillers, packaged units, AHUs, and VRF systems in corrosive saltwater environment Standby during drilling and production operations. Installation & Commissioning Install new HVAC systems and oversee piping, ductwork, and electrical connections Commission systems and conduct performance testing before handover to operations Read and interpret mechanical and electrical drawings, P&IDs, and HVAC schematics HSE & Compliance Ensure compliance with NUPRC safety standards, ASHRAE guidelines, and company HSE policies Complete PTW, JSA, and LOTO before working on energized equipment

Experience on offshore oil and gas producing facility, preferable FPSO. Minimum of 8 years' experience in the field of repair of HVAC & Refrigeration systems. Must hold recognized OND or equivalents or have completed a recognized trade apprenticeship or verified technician training scheme with a minimum of working experience. Must be able to work effectively as part of a team.
Location : Lagos - offshore
Language / Level :
English : C-Professional working proficiency

2026-43264 - Valve Senior Technician M/F

Fri, 08 May 2026 22:29:51 Z

Contract type : Fixed-term-contract
Position description :
We are seeking an experienced Valve Technician to join our team for a comprehensive valve greasing campaign during the Shutdown. Key Responsibilities: Valve Maintenance and Greasing Perform routine and preventive maintenance, including greasing, on a wide range of valves such as ball, gate, globe, butterfly, and check valves. Tool and Equipment Management Properly handle and maintain tools and equipment used in valve maintenance.

High school diploma or equivalent. Technical certification in mechanical or industrial maintenance is preferred. Minimum of 6years of experience as a valve technician, preferably in an offshore environment. Proficiency in valve maintenance, repair, and greasing. Familiarity with various valve types and their operating principles. Valid offshore safety and survival certificates (e.g., BOSIET, HUET). Trade certifications related to valve Ability to work in offshore conditions, including climbing, lifting, and working in confined spaces.
Location : Offshore - Lagos
Language / Level :
English : C-Professional working proficiency

2026-42712 - HEAD OF MECHANICAL MAINTENANCE PREPARATOR - ONSHORE M/F

Thu, 07 May 2026 22:29:44 Z

Contract type : Permanent contract
Position description :
Purpose He checks and ensures that vital equipment on production sites is available as and when required. Qualifications required; The holder of this position must have the following qualifications: ✓ Equivalent of DUT/BTS (French), B.Sc. Mechanical/Instrumentation/Electrical Engineering (2.1), ✓ 5 years of general industrial maintenance ✓ Computer literacy is required, ✓ Ability to work offshore under the climatic conditions of the site, ✓ Ability to work in a multinational team. Ability to work in a service relationship. ✓ Competence/experience in the relevant specialities (mechanical/fitting, handling, tooling, electricity, instruments), ✓ Experience in CMMS ✓ Working language: English Bright 3.5 (or equivalent)

HSE ✓ Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity GENERAL DESCRIPTION ✓ Support of offshore operations, ✓ Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…) ✓ Check repairs requirement and quality ✓ Short- and medium-term improvement methods MAIN FUNCTIONS ✓ Review preventive maintenance program validity. Check availability of means to complete it as and when required. ✓ Assist the SITE as required for corrective maintenance ✓ Prepare work pack for specific maintenance job when requested ✓ Analyse CMMS report for his field of competence and recommend improvement solutions to COMPANY as required ✓ Set up and implement technical procedures, follow-up and update maintenance procedure in relation with COMPANY representatives, ✓ Ensures quality of the maintenance operations : preparation of intervention files, work orders, reporting, CMMS, ✓ Taken vibration measurements on site and analysis for Method Mechanical engineer
Location : GIRASSOL FPSO
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : B-Limited working proficiency

2026-43262 - CHEFE DE EQUIPA DE MECANICO* M/F

Thu, 07 May 2026 12:46:18 Z

Contract type : Fixed-term-contract
Position description :
Operations: Organises and performs on site the maintenance operations which are placed under his responsibility, Ensures strict compliance with COMPANY HSE policies, including adherence to Permit to Work (PTW) procedures, isolation standards, and approved operating procedures. Leads and coordinates field technicians during maintenance and troubleshooting activities, ensuring work is executed safely, efficiently, and in accordance with industry best practices. Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Prepares detailed technical reports, including failure analysis, root cause identification, and corrective/preventive recommendations. Carries out, at the Supervisor request, any intervention within his field of competence. Performs advanced fault diagnosis and takes in charge the systems under his responsibility in case of breakdown, ensuring timely restoration to normal operating conditions.

Technical Diploma or HND in Mechanical Engineering, Industrial Maintenance, or related discipline. Minimum 8 years’ experience in Oil & Gas mechanical maintenance, including offshore operations. Minimum 3 years in a supervisory or Foreman position. Strong experience with rotating and static equipment including pumps, compressors, gearboxes, turbines, diesel engines, valves, heat exchangers, air coolers, hydraulic systems, and cranes. Good understanding of preventive, corrective, and condition-based maintenance. Ability to read and interpret P&IDs, PFDs, isometric drawings, vendor manuals, and datasheets. Practical knowledge of alignment, flange management, bolting, lubrication, bearing replacement, and mechanical troubleshooting. Familiarity with CMMS systems, preferably SAP PM. Good knowledge of PTW, isolations, gas testing, ATEX requirements, PPE, and offshore HSE procedures. Good supervisory, reporting, and communication skills. Proficient in Microsoft Word and Excel. Ability to work offshore rotational schedules in a multicultural environment.
Location : Offshore Block 3/05
Language / Level :
Portuguese : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency
Language / Level :
English : C-Professional working proficiency

2026-42586 - CONTRÔLEUR FINANCIER – BU Afrique subsaharienne (H/F) H/F

Thu, 07 May 2026 11:29:47 Z

Contract type : Fixed-term-contract
Position description :
Description de la mission proposée SPIE Global Services Energy (SGES), filiale du Groupe SPIE, propose une gamme complète de services aux entreprises du secteur de l’énergie à l’international. Pour continuer à se développer, le Groupe a en permanence besoin de nouvelles compétences et recherche pour le siège de sa Direction Financière Afrique : Un Contrôleur Financier – Business Unit Afrique subsaharienne (H/F) Au sein de la direction financière de la BU Afrique subsaharienne, le contrôleur financier sera chargé de : Assister le DAF de la BU dans le support et le contrôle financier des filiales sur les aspects comptables, financiers, fiscaux et juridiques. Assurer le suivi et la résolution des sujets recensés, avec appui, quand cela est nécessaire, des experts de la DAF Groupe. S’assurer du respect des procédures Groupe. Suivre, en lien avec l’audit interne SGES, la mise en œuvre des plans d’actions suite à la réalisation des missions d’audit et contrôle interne. Participer aux audits des commissaires aux comptes en support aux équipes locales et du Siège. Participer à la clôture mensuelle des comptes de la BU et faire le lien avec la comptabilité de gestion en coordination avec le Contrôleur de Gestion BU. Assister le DAF lors des réunions mensuelles d’activité avec les filiales et le Siège. Participer à la montée en compétence des équipes Finance locales (réalisation de sessions de formation/d’information sur l’actualité Finance impactant la BU).

Profil recherché : Issu(e) d'une formation supérieure, Bac +5 minimum de type école de commerce ou équivalent. Minimum 5 ans d'expérience en audit en cabinet (BIG 4), contrôle financier et/ou contrôle de gestion dans un environnement multi-sociétés. Solides connaissances en contrôle financier (analyse des états financiers notamment postes du bilan). La connaissance du contrôle budgétaire et du contrôle de gestion (suivi de gestion, suivi d'affaires et d'analyse des coûts) est un plus. Maîtrise des outils de reporting BI (notamment EPM), d’Excel (TCD notamment), la connaissance d’IFS (ERP comptabilité) est un atout. Excellent niveau d’anglais. Possibilités d’évolution et d’expatriation pour les candidats à fort potentiel. Des déplacements dans les filiales sont à prévoir pour la conduite du poste. Compétences Votre rigueur, votre autonomie, vos capacités d'analyse et de synthèse sont attendues pour mener à bien les missions qui vous seront confiées. Enfin, votre relationnel, votre proactivité ainsi que votre capacité à prendre du recul sont autant d'atouts pour ce poste.
Location : Cergy-Pontoise, France
Language / Level :
English : D-Full professional proficiency
Language / Level :
French : E-Native or bilingual proficiency

2026-43256 - Project Architect * M/F

Thu, 07 May 2026 10:09:36 Z

Contract type : Temporary work contract
Position description :
SPIE Services Nigeria Limited is currently looking for Project Architect (in- House) to join its work force in Nigeria. See Job description below SERVICE DIMENSION: The Project Architect serves as the Company's resident in-house architectural authority across all Company EP Nigeria Limited facilities in Nigeria. The role holder is responsible for the full architectural lifecycle of capital projects and facilities management services, from initial design concept through to construction supervision, quality assurance, and as-built documentation. This is a technically demanding, multi-site role requiring a seasoned professional who can independently manage complex briefs, engage with contractors and consultants to enforce design standards, and ensure that all built environments meet the Company's specifications, regulatory requirements, and best international practices in construction and infrastructure. ACTIVITIES: A. Architectural Design & Documentation Articulate, initiate and develop original conceptual architectural designs in response to project briefs and Company requirements. Produce detailed architectural drawings, including plans, sections, elevations, and specifications, across all project stages from concept to construction. Prepare shop drawings and change-control drawings during construction phases, ensuring alignment with approved designs. Review and validate architectural designs submitted by external consultants, verifying compliance with scope, specifications, and applicable standards. Maintain and update all architectural working documents to reflect evolving site conditions and approved variations. B. Construction Supervision & Quality Control Provide day-to-day on-site supervision of all architectural aspects of construction works across Company locations. Ensure strict adherence by contractors to approved construction drawings, specifications, and contract documents. Conduct quality assurance and quality control inspections on all architectural elements, identifying defects and non-conformances. Supervise the testing and approval of building materials and components to confirm compliance with specified standards. Prepare detailed site inspection reports, punch lists, and progress updates for Management review. C. Project Management Support Serve as the Company's resident site architect for both Special Projects and Facilities Management works. Provide technical guidance on construction methods, sequencing, and best-practice execution approaches. Verify that completed works conform strictly to approved-for-construction drawings prior to signing off. Carry out periodic reviews of architectural drawings and ensure timely updates as required throughout the project lifecycle. Ensure that all as-built drawings for Company facilities are accurately completed, filed, and maintained.

D. Standards, Compliance & Documentation Ensure all architectural deliverables conform to Company' internal specifications (COMPANY standards) and applicable industry best practices. Maintain a comprehensive and current record of all architectural drawings, specifications, and technical references for Company facilities. Support the development and continuous improvement of architectural standards and procedures within the Facilities Management function. Liaise with structural, mechanical, and electrical engineering teams to ensure coordinated, integrated design outputs. KPI Timely delivery of accurate architectural drawings and documentation at each project stage. Zero tolerance for non-conforming construction works proceeding without formal resolution or approved variation. Completeness and currency of as-built drawings for all Company facilities. Quality of site inspection reports and punch lists, measured by Management and contractor feedback. Compliance of completed works with approved-for-construction drawings, as verified at project sign-off. QUALIFICATIONS / EXPERIENCE REQUIRED Minimum of a Bachelor of Science (B.Sc.) degree in Architecture or equivalent qualification from a recognized institution. Registration with the Architects Registration Council of Nigeria (ARCON) is mandatory. Membership of the Nigerian Institute of Architects (NIA) or an equivalent professional body is an advantage. Minimum of 14 years' post-qualification work experience in an architectural or engineering consultancy or a comparable corporate environment. Demonstrated experience managing the full architectural lifecycle of major construction and infrastructure projects. Prior experience working within an oil and gas, energy, or large corporate multi-site environment is highly desirable.
Location : Port Harcourt, Nigeria
Language / Level :
English : C-Professional working proficiency

2026-43026 - Contracts & Claims Engineer M/F

Thu, 30 Apr 2026 22:26:45 Z

Contract type : Temporary work contract
Position description :
SPIE Services Nigeria Limited is currently looking for a Contracts & Claims Engineer to join its work force in Nigeria. Responsibilities include: Build EPNG Project Management System Provide support to define the method & tools related to contract management, claims and disputes management. Participate to definition methods for the entity (Contract toolbox, Competence requirement for contract engineers, expertise requirement, evaluation quiz...) Communicate, explain and raise awareness on the methods and tools, and contractual rigorousness. Control the contract management of the portfolio and prepare for Claim Provide guidance in identifying potential change orders and claims. Assist the project in drafting correspondences and notices to Contractors. Analysis and review of existing Claims: provide support to projects for existing Claims and corresponding resolution (contracts execution phase / close out phase), Provide higher understanding and recommendations for building the Claim dossiers / corresponding settlement. Provide expertise to projects When relevant may act as Contract engineer for some designated projects. Coach the contract engineers of the entity and Projects Portfolio (Assistance, advice, training...) Provide dedicated support during CFT or claim negotiation, Tender evaluation… Provide support to the project to build ad Hoc Decision support dossier for Contract Committee or VO approval Help project to navigate within HQ, TGP or the affiliate making sure internal stakeholder are well informed and consulted as required. Improve and learn from experience Contribute continuously to Contracts REX/Lessons Learnt consolidation. For each of the dossier, starting by screening the existing REX and when completing a dossier preparing main lessons learnt to be shared with other contract engineers and to be archived.

QUALIFICATIONS / EXPERIENCE REQUIRED Contract and procurement professional preferably in energy sector Professional Experience (number of years): 20 Experience within project (number of years): 15 Very Good understanding of all aspects of the project: planning, time impact, quantum, costs, risk management, project management, technical, local content… Essential personnel management skills (Teamwork, communication, coordination, delegation).
Location : Port Harcourt, Nigeria
Language / Level :
English : C-Professional working proficiency

2026-43114 - PREPARADOR MECÂNICO* M/F

Mon, 27 Apr 2026 07:47:40 Z

Contract type : Fixed-term-contract
Position description :
General Description Support of offshore operations, Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…) Check repairs requirement and quality Short and medium term improvement methods HSE: Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Operations: Review preventive maintenance program validity. Check availability of means to complete it as and when required. Assist the SITE as required for corrective maintenance Prepare work pack for specific maintenance job when requested Analyze CMMS report for his field of competence and recommend improvement solutions to COMPANY as required Ensures quality of the maintenance operations: preparation of intervention files, work orders, reporting, CMMS

Theoretical Knowledge Basic understanding of oil & gas facilities and processes (well to export), including hydrocarbon risks (explosion, asphyxiation). Working knowledge of SAP for maintenance planning, work order preparation, material requisition, and history tracking. Proficient in basic computer use (Word, Excel, email, internet). Strong foundation in mechanical principles and process parameters (pressure, temperature, flow, density) and their impact on rotating and static equipment performance. Able to read and interpret P&IDs, isometric drawings, GA drawings, equipment datasheets, and vendor documentation. Equipment Knowledge Working knowledge of mechanical installation (filters, gear boxes, exchangers, air coolers, diesel engine, gas turbines, centrifugal and reciprocating pumps or compressors, common valve types (butterfly, gate, ball, cage and PSV) and hydraulic systems (cranes, HPU, pumps). Maintenance work preparation know-how Understand maintenance strategies and techniques, including: Preventive and corrective maintenance Alignment, tolerances, and clearances Basic condition monitoring concepts (vibration, temperature, leaks) Be able on a given preventive work order to prepare tools, spare parts and adapt procedure or work instruction. Basic understanding of process control interactions with mechanical systems, including how equipment responds to operational changes (start-up, shutdown, trips). Awareness of safety systems and interfaces with mechanical equipment, including ESD actions, relief systems, and isolation philosophy. Qualifications: Bacharelato em Engenharia Mecânica Has held as a minimum a Mechanical foreman position for up to 5 years in an offshore maintenance setting Computer literacy is required, Ability to work offshore under the climatic conditions of the site, Ability to work in a multinational team. Ability to work in a service relationship. Experience in CMMS
Location : Offshore Block 3/05
Language / Level :
Portuguese : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency
Language / Level :
English : C-Professional working proficiency

2026-42339 - MONTEUR MECANICIEN H/F H/F

Wed, 22 Apr 2026 22:17:03 Z

Contract type : Permanent contract
Position description :
Vous aimez la technique? vous souhaitez un environnement de travail stimulant? vous n'aimez pas la routine? alors ce poste est fait pour vous. Vos missions : Assurer, sur chantier et/ou en atelier, les opérations de démontage, remise en état et remontage de machines tournantes, turbines ou auxiliaires selon une gamme opératoire ou un Plan Qualité Affaire. - Prendre en charge le matériel : Réaliser l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées Identifier des pièces et sous-ensembles et réaliser le stockage approprié - Démonter et expertiser : Réaliser le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles Réaliser le nettoyage approprié des pièces et des sous-ensembles Réaliser le contrôle dimensionnel et géométrique Réaliser le contrôle des jeux fonctionnels Identifier les pièces à réparer ou à remplacer En atelier, renseigner le compte rendu d’évaluation (proposer à son responsable les réparations à effectuer) - Remettre en état et remonter le matériel : Réaliser le contrôle dimensionnel et géométrique des pièves neuves ou réparées Réaliser le contrôle des jeux fonctionnels en cours de remontage Réaliser des opérations d’ajustage Réaliser des opérations de montage Réaliser des opérations simples de tuyauterie et chaudronnerie Réaliser les travaux par point chaud (soudure, montage par dilatation thermique…) Réaliser des opérations de réglage - Opérations de réglage (sur chantier) : Assister :l’ingénieur en charge du démarrage le client dans ses opérations de conduite de démarrage Surveiller : Les éléments critiques et ceux qu’il a visités Les paramètres de fonctionnement et avertir le responsable du démarrage en cas d’anomalie L’absence de fuites d’huile, de combustible, d’air ou de vapeur - Traçabilité des opérations: Renseigner les feuilles de contrôle Renseigner les feuilles d’inventaires à réception et expédition Participer à la rédaction des divers rapports et procès-verbaux Renseigner le Plan Qualité Affaire et gamme - Moyens matériels et poste de travail: Ranger et nettoyer les outillages fournis Veiller à l’entretien du matériel Maintenir le poste de travail propre et rangé Informer le chef d'équipe/chef de chantier/Responsable atelier de tout outillage manquant ou défectueux Effectuer une demande de moyens supplémentaires si requis auprès du chef de chantier / chef d’équipe / Responsable atelier Effectuer le rangement final du chantier / zone de travail atelier et des outillages - Être en appui technique (compagnonnage...) des monteurs mécaniciens, des alternants…. - Peut-être amené à encadrer ponctuellement une équipe de monteurs mécaniciens

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative En chantier et en l’absence de chef de chantier, savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier. Ce poste nécessitera un accompagnement en interne. (formation / compagnonnage / Ecole turbine) Parce-que vos valeurs sont les nôtres : flexibilité, agilité et expertise rejoignez-nous.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : B-Limited working proficiency

2026-43063 - CHEF DE CHANTIER TAV/TAG H/F H/F

Wed, 22 Apr 2026 13:06:52 Z

Contract type : Permanent contract
Position description :
Vous aimez la technique? vous souhaitez un environnement de travail stimulant? vous n'aimez pas la routine? alors ce poste est fait pour vous. Vos missions : Réaliser, organiser et suivre les chantiers de machines tournantes, turbines ou auxiliaires dans le respect en termes de coût, qualité, délai. Il supervise une équipe de chef d'équipe et/ou de monteur mécanicien. - Prendre en charge le matériel o Réaliser/s’assurer/valider l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées o Identifier/s’assurer/valider les pièces et les sous-ensembles et de leur stockage approprié o S'assurer/valider que l'ensemble des pièces et sous-ensembles sont disponibles - Démonter et expertiser o Réaliser/s’assurer/valider le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles o Réaliser/s’assurer/valider le nettoyage approprié des pièces et des sous-ensembles o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique / des jeux fonctionnels o Identifier/s’assurer/valider les pièces à réparer ou à remplacer o Renseigner le compte rendu d’évaluation et proposer au pilote de l’affaire réparations à effectuer. - Remettre en état et remonter le matériel o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique des pièces neuves ou réparées o Réaliser/s’assurer/valider le contrôle des jeux fonctionnels en cours de remontage o Réaliser/s’assurer/valider les opérations d’ajustage / montage / les opérations simples de tuyauterie et chaudronnerie / les travaux par point chaud (soudure, montage par dilatation thermique…) - Opérations de réglage (sur chantier) o Réaliser/s’assurer/valider les opérations de réglage (lignage des internes d’une turbine, alignement machines, pesage de corps,…) - Traçabilité des opérations o Remplir/s’assurer/valider les feuilles de contrôle associés aux opérations de maintenance effectuées o Participer/rédiger/valider les divers rapports et procès-verbaux (partie constat au minimum) et le faire signer au client o Proposer des solutions au pilote d’affaire o Renseigner et valider le Plan Qualité Affaire et/ou gamme - Piloter l’activité o Valider et signer le PDP o Signer le PV d'ouverture de chantier et envoyer au pilote* d'affaire o Veiller à l'exécution des travaux attribués par pilote* d’affaire conformément au planning o Informer quotidiennement le pilote* d’affaire de l'avancement du chantier et émettre des rapports journaliers.... - Assister lors de la mise en service (sur chantier) - Assurer la gestion et l’animation des ressources (moyens humains, matériel et technique)

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative Savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier. Parce-que vos valeurs sont les nôtres : flexibilité, agilité et expertise rejoignez-nous.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : B-Limited working proficiency

2026-42814 - Tecnico de Grua* M/F

Tue, 21 Apr 2026 10:39:02 Z

Contract type : Fixed-term-contract
Position description :
HSE Complies with and applies the COMPANY’s HSE regulations particularly Permit to Work procedures, approved operating procedures, and standard industry practice during maintenance activities under supervision. Reports unsafe acts, conditions, and near misses to the supervisor. Petroleum: Have a basic understanding of offshore facilities and process systems. Demonstrates awareness of hydrocarbon behavior and associated risks (explosion, asphyxia…). Computer Skills: Able to produce basic report using Microsoft Word Able to perform simple calculations and data entry using Microsoft Excel. Able to use email and internet tools for work purposes. Physics: Understands and applies basic physical laws and units (forces, mass, energy, Newton’s laws). Has basic knowledge of materials and steels, including usage, mechanical resistance, corrosion mechanisms, and prevention methods. Engineering: Able to read and use basic engineering drawings (P&IDs, PFDs, isometrics). Able to interpret vendor documentation, nameplates, datasheets, tolerances, and adjustment figures. Able to produce clear and accurate hand sketches and drawings to scale. Equipment: Understands the working principles of crane‑related mechanical and hydraulic equipment, including:Filters Gear boxes Diesel engines Common valve types (butterfly, gate, ball, PSV) Crane hydraulic systems (crane hydraulic circuits, HPU, hydraulic pumps). Fully familiar with lubrication requirements and different types of lubricants. Familiarized with preventive maintenance tasks and their objectives. Aware of Condition‑Based Maintenance (CBM) techniques such as vibration monitoring and oil analysis, including their purpose and limitations. Maintenance: Understands preventive and corrective maintenance concepts and basic maintenance planning principles. Has basic knowledge of CMMS usage (issue notifications, read and complete work orders). Able to identify and correctly use mechanical measuring tools. Able to identify spare parts and follow appropriate procedures or work instructions.

Angolan national. Technical secondary education or vocational training in Mechanical Maintenance or related discipline. 0 to 3 years of experience in mechanical maintenance or industrial equipment maintenance; oil & gas experience is an advantage. Basic knowledge of diesel engines, hydraulic systems, gearboxes, and lubrication principles. Ability to use basic mechanical tools and follow maintenance procedures under supervision. Strong ability to read drawings and technical documentation. Strong awareness of HSE rules and willingness to comply with offshore safety requirements. Fluent in Portuguese; basic English knowledge required. Basic computer skills (Word, Excel, email). Medically fit and willing to work offshore under rotational schedules. Demonstrates motivation, discipline, and willingness to learn.
Location : Offshore Block 3/05
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency
Language / Level :
Portuguese : C-Professional working proficiency

2026-43023 - HSE Engineer Apprentice H/F

Fri, 17 Apr 2026 12:40:10 Z

Contract type : Apprenticeship agreement / contract
Position description :
Main Responsibilities - Collect, organise, and format HSSE data for dashboards and routine reporting. - Assist in preparing PowerPoint slides, charts, and visual materials. - Support communication activities (short videos, internal campaigns, safety moments). - Help maintain files, templates, and documentation. - Perform basic analysis, benchmarking, or research when needed. - Draft summaries or simple briefs based on provided information. - Provide support on preparatory tasks that are not yet shared with the wider team. - attend and eventually contribute to the HSE meeting with HSE Network in SPIE GSE. - Support preparation and follow up of HSE audits and Inspections; - Support the implementation of proactive indicator in GSE; - Support the implementation of a HSE reporting software.

Profile & Education - Engineering student (Bac+4/Bac+5) seeking a 1‑year internship. - Curious, reliable and able to work in a fast‑paced environment. - Interest in HSSE topics, industrial safety, energy sector, operations; - Data/visual and oral communication is a plus.
Location : 10 Avenue de l'Entreprise, 95800 Cergy, France
Language / Level :
English : E-Native or bilingual proficiency
Language / Level :
French : D-Full professional proficiency

2026-42506 - INGENIEUR HSE SITE H/F H/F

Wed, 15 Apr 2026 22:22:32 Z

Contract type : Permanent contract
Position description :
Vous souhaitez évoluer dans un environnement de travail stimulant? vous n'aimez pas la routine? alors ce poste est fait pour vous. Vos missions : Assurer la prévention et la maîtrise des risques HSE sur les sites clients et contribuer au déploiement des standards HSE de l'entreprise. Il intervient principalement en support des opérations SPIE TM et apporte également un support HSE ponctuel à d’autres projets du périmètre ENA ainsi qu’aux activités de préparation d’offres (bids). Le poste combine des activités opérationnelles terrain et de support technique HSE dans un objectif d’amélioration continue de la performance HSE. - Support aux équipes projet pour la préparation HSE des chantiers (travaux SPIE TM et sous-traitants) Participation aux analyses de risques et la définition des moyens de prévention associés Support à la réalisation des PDP Vérification de l’adéquation des compétences / habilitations / autorisations de conduite / moyens (vérification VGP…) Support au briefing du Chef de chantier sur les risques / mesures de prévention - Support aux Chefs de chantier sur site client Participation à l’inspection commune et à la validation du PDP Vérification de l’état des moyens et des VGP, vérification des consignations, purges préalables à l’intervention Vérification de l’adéquation des compétences / habilitations / autorisations de conduite Support au briefing des intervenants sur les risques / mesures de prévention Vérification de l’appropriation par les intervenants et de la bonne exécution des dispositions HSE prévues pour l’exécution des travaux en sécurité (PDP, respect des consignes SPIE TM, règles vitales SPIE) Veiller à la mise à jour des analyses de risques en cours de chantier Support pour les animations de causeries et le déploiement des pratiques de fiabilisation des interventions (pré-job briefing / minute sécurité / vigilance partagée / attitude interrogative…) - Traiter les remontées d’information du chantier (accidents, presqu’accidents, situations dangereuses, causeries,…) Remonter et analyser les causes des incidents QHSSSE Participer à la proposition des actions d’amélioration - Support HSE aux projets hors SPIE TM Réaliser des missions ponctuelles d’appui HSE sur des sites clients hors périmètre STM Apporter un support technique HSE aux équipes opérationnelles Participer à l’analyse des risques et à la définition des mesures de prévention Contribuer à la diffusion des standards HSE SPIE - Support aux activités de préparation d’offres (Bid Support) Contribuer aux volets HSE des dossiers d’appel d’offres Participer à l’identification des risques HSE associés aux projets Définir les stratégies HSE et plans de prévention associés Apporter une expertise HSE aux équipes commerciales et techniques

· BAC+5 – diplôme d’ingénieur en mécanique ou équivalent · Expérience minimum de 10 ans sur sites industriels · Bonne connaissance des activités de maintenance mécanique industrielle · Maîtrise des risques liés aux travaux mécaniques · Connaissance des opérations de levage et manutention · Maîtrise des risques liés aux travaux en hauteur · Connaissance des risques liés aux espaces confinés · Connaissance des procédures de consignation / déconsignation (LOTO) · Maîtrise des analyses de risques chantier (JSA, analyses préalables) · Connaissance des plans de prévention (PDP) et permis de travail · Connaissance des inspections communes préalables · Bonne connaissance de la réglementation HSE applicable aux sites industriels · Capacité à identifier et analyser les situations dangereuses · Sens de l’observation et vigilance terrain · Rigueur et capacité d’analyse · Capacité à travailler en autonomie · Bonnes compétences relationnelles avec équipes et clients · Capacité à sensibiliser les équipes aux règles HSE · Esprit critique et force de proposition · Contribution aux démarches d’amélioration continue HSE · Anglais professionnel niveau B2 minimum Le poste est basé dans nos locaux de Lons en France. Des déplacements sur chantier sont à prévoir en France et à l'étranger (+/- 50 % du temps) Répartition de 75% sur l'activité SPIE TM et 25% sur la BU ENA. Parce-que vos valeurs sont les nôtres : flexibilité, agilité et expertise rejoignez-nous.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency

2026-42902 - Contrôleur de gestion H/F

Mon, 13 Apr 2026 09:05:19 Z

Contract type : Fixed-term-contract
Position description :
Concevoir et piloter des indicateurs de performance (KPI).  Suivre l’évolution des résultats financiers de l’entreprise et évaluer sa performance.  Proposer et mettre en œuvre des mesures correctives si necessaire.  Réaliser le suivi budgétaire et assure les clôtures comptables.  Mettre en place et contrôler les procédures internes.  Proposer des solutions d’optimisation de la rentabilité.  Conseiller l’entreprise en matière de gestion comptable et financière.  Élaborer le reporting vers la maison mère (carnet de commandes, compte de résultat, prévisions glissantes, crédit client, provisions).  Rapporter ses analyses à la Direction de la Filiale et au Siège, en expliquant les écarts constatés.  Participer à l’élaboration et à l’analyse des budgets et re-prévisions annuelles.  Contribuer aux revues d’affaires et aux appels d’offres ponctuels.  Participer à l’amélioration de l’ERP en lien avec la Direction Financière.  Assurer le lien avec les opérationnels pour leur fournir les informations financières nécessaires.  Remettre en place et suivre les procédures de contrôle de gestion local.  Assiste la Direction Financière lors des audits CAC et/ou interne, contrôle des administrations, ...

Formation supérieure en finance, comptabilité, contrôle de gestion ou école de commerce (Bac+3 à Bac+5). Expérience de 2 ans minimum en contrôle de gestion (stages inclus). Connaissance du secteur d’activité de l’entreprise (atout). Anglais professionnel souhaité. Comptabilité générale et analytique. Maîtrise des outils de contrôle de gestion et ERP (ex. IFS). Reporting et analyse financière. Sens de la rigueur et de l’organisation. Esprit de synthèse et d’analyse. Résistance au travail sous pression. Esprit d’initiative et proactivité.
Location : Base DPS, Rue Andrée GALLAIS, B.P. 579, Port-Gentil, Gabon
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : E-Native or bilingual proficiency

2026-42481 - Technicien expérimenté / Chef d'Equipe Machines Tournantes M/F

Sat, 11 Apr 2026 22:24:39 Z

Contract type : International Contract
Position description :
coordonner l'équipe de techniciens en charge des activités d’expertise, de démontage, remontage et tests sur les machines tournantes (pompes, compresseurs, réducteurs, etc). Planifier, organiser et contrôler les opérations de maintenance préventive et corrective Suivi technique Garantir la conformité technique des interventions sur pompes, compresseurs et réducteurs selon les standards API 610 / 682 et exigences clients. Contrôler la qualité des interventions mécaniques (alignement, équilibrage, diagnostic) réalisées par ses équipes. Suivre l’état des pièces de rechange / stocks consommables et anticiper les besoins critiques. Réceptionner et contrôler les pièces détachées fournies par les clients et/ou le service Achat. Gestion & reporting Rédiger les rapports techniques après intervention comprenant les informations équipement, les rapports de métrologie / d’équilibrage, les tests de fin d’intervention, les photos, les observations et recommandations. Assurer le reporting auprès du Chef D’Atelier. Assurer la traçabilité documentaire (Rapport, fiche de réception, note d’entrée/sortie).

Expérience Minimum 5 ans d’expérience en maintenance mécanique et en atelier. Expérience confirmée sur machines tournantes (pompes, compresseurs, réducteurs). Expérience en environnement Oil & Gas / Pétrochimie fortement appréciée. Compétences techniques Maîtrise des techniques de maintenance (expertise, démontage, montage, équilibrage, test) des machines tournantes et des garnitures. Maîtrise des tolérances APIs. Maîtrise des outils de mesures, de métrologies, des techniques d’alignements, d’équilibrage et de diagnostic vibratoire. Lecture et interprétation de plans, schémas et spécifications techniques.
Location : Luanda, Atelier Pompe
Language / Level :
English : C-Professional working proficiency

2026-42869 - Rigger de Grua (Crane Rigger)* M/F

Thu, 09 Apr 2026 08:53:38 Z

Contract type : Fixed-term-contract
Position description :
Operations Organises and executes rigging and lifting operations under his responsibility, ensuring safe and efficient execution. Supports planning activities by providing input on resources, lifting requirements, and execution strategies for rigging operations. Responsible to arrange and organize relevant materials and accessories from lay down area to work location. Assists the GMC team during lifting activities to ensure safe and effective execution of maintenance tasks. Ensures full compliance with QHSSE rules, Permit to Work (PTW), and approved lifting procedures. Maintains all rigging equipment, ensuring proper storage, certification, colour coding, and fitness for purpose. Participates in Job Hazard Analyses and Attend safety toolbox meetings on a daily basis with contractors' work teams. Supports control of lifting equipment certification and ensures all uncertified or defective equipment is quarantined. Works closely with Warehouse and Inspection teams for control, handling, and tracking of lifting equipment. Executes any additional tasks within his field of competence as directed by supervision. Planning & Methods Identifies critical or complex lifting operations during preparation stages and ensures appropriate risk assessments and lifting plans are developed. Monitors rigging equipment availability and highlights any shortages or quality issues to planning and support teams. Tracks backlog of rigging activities and proposes corrective actions when required. Identifies recurring lifting issues and recommends improvements to procedures and equipment. Quality Assurance & Control Performs regular site checks to ensure lifting operations are executed in accordance with procedures and standards.

Education & Certification Técnico Médio (Mechanical/Industrial) or equivalent technical qualification.Alternatively, completion of a recognised trade apprenticeship or certified rigging training scheme. Valid (or expired within 1 year) rigging and lifting certification approved by a competent authority. Certification in slinging, lifting operations, and use of lifting accessories is mandatory. Experience Minimum 5–8 years’ experience in rigging and lifting operations within oil & gas or heavy industrial environments. Minimum 2–3 years offshore experience, including lifting operations to/from support vessels. Experience supporting lifting operations for maintenance activities (GMC or similar) is an advantage. Technical Competencies Strong knowledge of rigging practices, lifting equipment, and lifting accessories (slings, shackles, hoists, beams). Ability to interpret lifting plans, load charts, and rigging drawings. Familiar with lifting equipment certification, colour coding systems, and inspection requirements. Understanding of lifting risk assessment and critical lift planning. Maintenance & Systems Experience in inspection, tracking, and control of rigging equipment and lifting accessories. Ability to maintain rigging registers/databases and monitor certification status. Familiarity with warehouse and logistics handling of lifting equipment. HSE & Compliance Good knowledge of QHSSE requirements, Permit to Work (PTW), and lifting safety standards. Strong safety awareness with ability to identify hazards and ensure compliance with lifting procedures. Behavioural Skills Ability to coordinate with Operations, Marine, Inspection, and Logistics teams. Good communication and reporting skills (basic English required). Physically fit and capable of working in offshore conditions.
Location : Offshore Block 3/05
Language / Level :
Portuguese : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency
Language / Level :
English : C-Professional working proficiency

2026-42841 - QAQC Inspector M/F

Tue, 07 Apr 2026 15:43:40 Z

Contract type : International Contract
Position description :
Ø Monitor key performance indicators and quality targets, in coordination with the QMS, identifying improvement opportunities. Ø Follow up and Conduct Internal/external Audit (ISO, API ) when requested Ø Follow up and Conduct Internal /External Audit for Company Qualified Licensee. (Vam,Tenaris , NOV Grand Prideco Ø Verifications of document control as per Licensee procedure and upload to web site Licensee. Ø Follow up and investigate NCR internal and external opening. Ø Traceability of Incoming / outgoing documentation works order Client. Ø Strictly adhere to company’s rules, regulations and code of ethics Ø Share work and perform the inspection to the standard procedure and/or specified by Client request. Ø Review and prepare final report and/or certificate of conformity in a timely manner and assure its immediate dispatch to the Client. Ø Delivery of the W.O. file with all documentation to Finance department for Invoice Process. Ø Weekly report of the Quality department performance. Ø Control and records the use of gauges Ø Ensure gauges used in the shop are calibrated Ø Conduct dimensional and final inspection of tools. Ø Conduct inspection of surface treated (phosphate, cold rolling, and sand blasting) tools as well as give technical advice on surface treatment processes. Ø Ensure identification and traceability of tools and other customer properties. Ø Ensure proper filing and control of approved inspection and tally reports Ø Participate in the identification of nonconforming products Ø Maintain Gauges Control register for calibration update and interface with Logistics department & for Gauge handling to and from Licensors and/or calibration shops. Ø Knowledge of Make-up operations.

Ø License degree or technical Diploma: Electronics, Mechanical Ø Mechanical Background knowledge Ø Computer literate (Microsoft word, excel, power point) Ø Lead Auditor certificate will be an Advantage · Minimum 3/ 5 Years on the same position. ü API Q1 & Q2 knowledge ü ISO 9001 Quality Management System last edition ü OCTG, BHA, Drilling Equipment Inspection. ü Premium Connection Vam, Tenaris , Nov Grand Prideco ü T.H. DS-1 ü Calibration equipment. ü Handling and care of OCTG, Drilling equipment and BHA.
Location : Luanda, Machine Shop
Language / Level :
English : D-Full professional proficiency

2026-42818 - OPERADOR DE GRUA (CRANE OPERATOR)* M/F

Mon, 06 Apr 2026 10:58:10 Z

Contract type : Fixed-term-contract
Position description :
Operations Executes lifting operations as directed, including material transfer to/from support vessels, equipment handling, and offloading activities. Operates cranes, winches, forklifts, and other lifting/handling equipment in a safe and efficient manner. Organises and performs rigging and lifting activities under his responsibility, ensuring compliance with approved procedures and lifting plans. Ensures all lifting operations are conducted in accordance with QHSSE requirements, site procedures, and instructions from authorised personnel. Works closely with Logistics and Marine teams to ensure safe and efficient execution of lifting activities. Participates in pre-job risk assessments (JSA) and strictly follows all safety recommendations. Reports all incidents, near misses, and unsafe conditions to supervision and COMPANY. Ensures work areas are left clean and safe after completion of activities. Maintenance & Equipment Performs first-line maintenance and routine inspections on cranes and lifting equipment, reporting any anomalies to the Mechanical Supervisor. Assists in maintenance and minor repairs of lifting devices as required. Supports third-party inspection and certification activities, including use of water bags and load testing equipment. Ensures all lifting tools and equipment are maintained in safe and operational condition. Support Activities Provides assistance in rigging, lifting operations, and general handling activities as required. Supports mechanical team activities during non-lifting periods, as directed by supervision. Methods & Continuous Improvement Reports daily maintenance findings and operational feedback to supervision. Identifies recurrent issues and proposes improvements to procedures and equipment reliability. Ensures proper use of PPE and adherence to all safety procedures at all times.

Education & Certification Técnico Médio (Industrial/Mechanical) or equivalent technical qualification.Alternatively, completion of a recognised trade apprenticeship or certified technician training scheme. Valid or expired (within last 2years) offshore crane operator certification approved by a competent authority (e.g., BS 7121 or equivalent). Valid forklift and lifting equipment operator certifications. Experience Minimum 5 years’ experience in crane and lifting operations within oil & gas or heavy industrial environments. Minimum 3 years’ experience offshore, with proven involvement in:Lifting operations to/from support vessels and marine units Offshore material handling and equipment transfer Execution of lifting activities under Permit to Work (PTW) conditions Demonstrated experience in maintenance and first-line inspection of cranes and lifting equipment. Experience with critical lifting operations and adherence to approved lifting procedures and safety standards. Technical Competencies Strong knowledge of rigging and lifting operations, including lifting plans and safe load handling. Ability to operate cranes, winches, forklifts, and other lifting equipment safely and efficiently. Familiarity with inspection and basic maintenance of lifting equipment and accessories. Understanding of load testing activities (e.g., water bags, load cells) is an advantage. HSE & Compliance Good understanding of lifting safety standards, Permit to Work (PTW), and site procedures. Demonstrates strong safety awareness and adherence to QHSSE requirements at all times. Practical & Behavioural Skills Skilled in handling and operating various lifting and handling equipment. Ability to work effectively in a team and maintain good relationships with colleagues and contractors. Capable of working in offshore conditions and physically fit for site activities. Basic communication and reporting skills (English required).
Location : Offshore Block 3/05
Language / Level :
Portuguese : C-Professional working proficiency
Language / Level :
French : C-Professional working proficiency
Language / Level :
English : C-Professional working proficiency