Export RSS des offres - Seulement les offres à la une : Non / Pays : Europe-->Denmark, Europe-->France

2026-45241 - Chargé de Consolidation Sénior H/F

Thu, 05 Nov 2026 16:09:47 Z

Type de contrat : Durée indéterminée
Description du poste :
Le Chargé de Consolidation Senior pilote la consolidation IFRS d’un périmètre international de filiales, en assurant les clôtures, les retraitements techniques, les variations de périmètre et la remontée des comptes au Groupe. Il analyse les problématiques comptables et financières complexes (IFRS, cash, provisions, variations de périmètre), contrôle la qualité des reportings et accompagne les équipes locales dans la production des liasses de consolidation.

Vous êtes titulaire d'un diplôme de l'enseignement supérieur financière de type Master CCA, avec une expérience significative d'au moins 8/9 ans sur un poste similaire dans un contexte internationale et multi sociétés. L'anglais courant à l'écrit et à l'oral est indispensable pour ce poste. L'utilisation du logicel SAP BFC, TAGETIK
Lieu de travail : 10 Avenue de l'Entreprise, 95800 Cergy, France
Langue / Niveau :
Français : E-Bilingue ou Langue Maternelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-44756 - Acheteur indirect / Indirect Buyer H/F

Wed, 28 Oct 2026 23:12:38 Z

Type de contrat : Durée indéterminée
Description du poste :
1. Assurer le Category Management pour les catégorie indirectes (EPI, Outillages, Assurances, Flotte…) Réaliser et analyser une cartographie des dépenses pour les catégories indirectes Comprendre les besoins et attentes de ses clients internes (Country Manager, le BU manager ou acheteurs filiales) Etablir une stratégie Achats par catégorie en fonction des priorités annuelles Lancer des Appels d’offres Négocier avec les fournisseurs sur les aspects Coûts-Qualité-Délais et en prenant en compte l’aspect RSE Mettre à jour les accords commerciaux existants et signer de nouveaux accords commerciaux S’assurer de la bonne exécution des contrats et du respect des engagements contractuels Développer des catalogues Achat (si pertinence) Mesurer les gains financiers réalisés pour chaque catégorie Spécificité Assurances : en collaboration avec le Département Assurance du Groupe SPIE, revoir les polices de couverture actuelle et réajuster les couvertures en fonction de nos besoins réels (réduire les coûts liés à la sur-couverture) 2. Assurer la Gestion des contrats cadres indirects pour l’ensemble du périmètre GSE Récupérer l’ensemble des contrats cadres indirects en vigueur dans toutes les filiales GSE Alimenter notre base de données regroupant l’ensemble des contrats Ajouter ces contrats dans la contrathèque MySourcing (iContract) Configurer les alertes liées aux dates de fin contrats (iContract) Être en support des filiales dans la réalisation et la négociation de contrats cadres indirects 3. Participer à la décarbonisation et à la réduction des émissions de CO2 du Scope 3 de SPIE GSE pour les catégories indirectes Avec le support de la Direction des Achats, identifier les fournisseurs prioritaires chez SPIE GSE à intégrer dans un programme de réductions des émissions de CO2 (Ecovadis, SBTI, Viaco…) Mener une campagne d’évaluation annuelle de la performance RSE de nos fournisseurs indirects prioritaires Prospecter les fournisseurs indirects prioritaires et les persuader d’intégrer un programme d’évaluation auprès d’un organisme certifié 4. Participer aux campagnes de réduction du panel pour les fournisseurs des catégories indirects Pour les catégories indirectes, établir un plan de réduction du panel fournisseur en collaboration avec les fonctions opérationnelles de SPIE GSE Identifier les bonnes pratiques du Groupe applicables à SPIE GSE et les déployer sur les catégories indirectes Assurer le rôle de « gatekeeper » pour réguler la création de fournisseurs pour les catégories indirects 5. Participer aux campagnes d’évaluation des fournisseurs indirects Participer aux campagnes d’évaluation annuelle pour les fournisseurs indirects identifiés (avec la collaboration des acheteurs BU) Pour les fournisseurs ayant des actions correctrices ou des plans de progrès, suivre leur avancement tout au long de l’année Mettre en place un programme de suivi des performances pour le « TOP 10 fournisseurs indirects » (hors Travel)

Savoirs : Processus Achats Anglais professionnel Techniques de négociation Notions RSE Savoir-faire : Faire une expression de besoins Réaliser et analyser une cartographie des dépenses Négocier les marchés aux meilleures conditions Rédiger des contrats commerciaux – en français et en anglais Faire du sourcing Lancer et suivre un appel d’offres Evaluer les risques fournisseurs à court, moyen et long terme Suivre les performances des fournisseurs (KPI) Organisation Savoir être : Sens de l’écoute et du dialogue Esprit analytique Curiosité d’esprit Rigueur Fiabilité Qualités relationnelles afin de pérenniser les relations internes et externes Ténacité et résistance au stress
Lieu de travail : CERGY
Langue / Niveau :
Français : E-Bilingue ou Langue Maternelle
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43720 - Apprenti Data Ingénieur H/F

Tue, 20 Oct 2026 22:09:44 Z

Type de contrat : Contrat d'alternance
Description du poste :
· Concevoir et développer des scripts ou des outils pour intégrer, transformer et transférer des données entre systèmes (ERP, outils RH, finance…). · Automatiser les traitements récurrents : extractions, consolidations, mises à jour de données. · Veiller à la sécurisation des échanges de données (authentification, gestion des accès, traçabilité via logs). · Participer à la création de tableaux de bord et de visualisations

• Étudiant en formation de Bac+3 à Bac+5 (BUT, Licence, Master, école d’ingénieur), avec une spécialisation en développement informatique ou data engineering. • Bonnes bases en développement backend (Java, Python, Node.js ou autre langage serveur). • Connaissances en manipulation de données SQL, API REST, formats JSON/XML et outils de versioning (Git). • Rigueur, autonomie, esprit d’analyse, et goût pour le travail technique.
Lieu de travail : 10 Avenue de l'Entreprise, 95800 Cergy, France
Langue / Niveau :
Français : E-Bilingue ou Langue Maternelle
Langue / Niveau :
Anglais : B-Maitrise professionnelle élémentaire

2026-45056 - ICSS/PLC Specialist H/F M/F

Fri, 16 Oct 2026 10:14:31 Z

Type de contrat : Durée indéterminée
Description du poste :
Purpose Is responsible for integrity and follow-up of software and hardware for ICSS and interfaces with PLC's. He ensures that maintenance operations under his responsibility are carried out in strict accordance with TEPDK’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by NorSPIE. Ensures that all requirements expressed in the GS EP INS 135 are applied. He takes all necessary measures to ensure compliance with the maintenance schedule for the equipment under his responsibility. He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. HSE: Ensures that TEPDK’s HSE regulations are respected (especially procedures related to control of Work), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Have a good understanding of TEPDK HSE rules. Ensures that the team under his responsibility understands the group policies and applies them. Writes on a daily basic risks analysis for specific intervention. Advice while permit to work redaction, the specific trade measures to establish and ensures tools adequacy. Ensures that employees under his responsibility have the required qualification. Participate to safety talk before and after intervention. Participates to key procedure audits in proactive manner. Respects the waste management policy in force on site, verifying that all activities performed under his own responsibility, comply it, without any exceptions.

Experienced professional in ICSS, automatism Good knowledge of networks and Cybersecurity, dedicated training proof is a plus. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent and independent in his field, Must show common sense, organization ability and proven sense of responsibility. He must be able to anticipate and analyze situations.
Lieu de travail : Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-45055 - Onshore Work Permit Preparator M/F

Fri, 16 Oct 2026 10:09:55 Z

Type de contrat : Durée indéterminée
Description du poste :
GENERAL DESCRIPTION: · Prepare and coordinate Work Permit (WP) packages for offshore maintenance team. · Ensure all permits are prepared in accordance with COMPANY rules, procedures. · Verify technical documentation, risk assessments, isolation requirements, drawings, and supporting documents required for permit approval. · Coordinate with planners, technical asset lead and preparators to ensure work scopes are adequately prepared. · Support offshore teams during permit execution and resolve technical or administrative permit-related issues. · Participate in continuous improvement initiatives related to work preparation and permit processes. HSE: · Establish and maintain a strong safety culture in line with Company HSE requirements and Life-Saving Rules. · Ensure all work permits comply with COMPANY permit-to-work procedures and approved operating practices. · Verify that all hazards, control measures, isolations, and risk assessments are clearly identified and documented. · Ensure simultaneous operations (SIMOPS) risks are considered during permit preparation. · Promote process safety, operational safety, and asset integrity through rigorous preparation and review of work permits. Participate in incident investigations and implementation of corrective actions related to permit-to-work activities when required. MAIN FUNCTIONS: · Prepare work permits for corrective, preventive-related activities. · Review work orders and ensure required technical documentation is available before permit issuance. · Verify that Job Hazard Analyses (JHA), risk assessments, and isolation certificates are completed and attached. · Coordinate with offshore maintenance team to obtain permit approvals. · Ensure permits are prepared in accordance with work priorities and operational constraints. · Support weekly planning meetings and permit review meetings. · Maintain permit records and ensure documentation remains traceable and auditable. · Coordinate with offshore supervisors to ensure efficient work execution. · Contribute to KPI reporting related to preparation performance. Identify and propose improvements to permit preparation processes and work management systems.

· Technical diploma or equivalent in Mechanical, Electrical, Instrumentation, Process, or Maintenance disciplines. · Minimum 6 years' experience in industrial maintenance, including experience in the oil and gas industry. · Significant experience with Permit-to-Work systems and maintenance preparation activities. · Good knowledge of HSE management systems and risk assessment methodologies. · Experience with CMMS systems (SAP preferred). · Good understanding of offshore operational constraints and maintenance processes. · Strong organizational and coordination skills. · Ability to work effectively within a multidisciplinary and multinational team. · Rigorous, methodical, and proactive approach. Good communication skills and ability to manage multiple priorities simultaneously.
Lieu de travail : Kanalen 1, Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-44568 - Juriste Droit des Affaires Internationales & Compliance M/F

Fri, 02 Oct 2026 22:13:58 Z

Type de contrat : Durée indéterminée
Description du poste :
La finalité du poste est d’assurer la protection juridique de SPIE Global Services Energy lors de toutes les négociations de contrats que toutes nos filiales peuvent signer. Être un conseil, un expert au service des équipes opérationnelles et fonctionnelles pour définir ensemble la stratégie juridique en préservant les intérêts de SPIE Global Services Energy. Accompagner les équipes dans le cadre de l’analyse, la négociation, l’exécution et la clôture des contrats en proposant des solutions pragmatiques et efficaces et ce, en garantissant le respect de nos procédures et des contextes réglementaires et législatifs applicables, en France et à l’international. Sur la partie compliance, être le relai en local auprès des équipes du déploiement du programme Compliance et spécifiquement, de lutte contre la corruption dans tous ses aspects. - Revoir, rédiger, qualifier une grande variété de contrats (MOU, accords de confidentialité, contrats de partenariats, contrats de services, contrats d'opération maintenance, projets clé en main) et participer à leurs négociations ; - Participer au suivi de l’exécution de certains contrats notamment via certains actes de contract management ; - Revoir et négocier les garanties maison-mère ; - Préparer la documentation juridique de réponses à des appels d’offres ; - Participer au processus de revue des risques en identifiant les risques juridiques et légaux et contractuels et fournir un support afin d’éviter ou de limiter ces risques, proposer des solutions innovantes aptes à réduire les risques ; - Apporter expertise et conseil en droit des affaires, tant en France qu’à l’international, aux clients internes basés en France et dans toutes nos filiales internationales ; - Proposer aux clients internes des schémas correspondant à leurs besoins ; - Suivre les contentieux et précontentieux internationaux et nationaux et Gérer les avocats externes ; - Participer à la mise à jour et l’élaboration de modèles de clauses ou de contrats ; - Préparer des modules de formation interne sur des points de droits des affaires ; - Suivre les évolutions législatives et réglementaires applicables à ces opérations ; Se faire le relai en local de la mise en œuvre de la gouvernance d’entreprise, des règles du code de conduite et de toutes les procédures éthiques applicables (rappel des règles, formation..).

Pack Office (Excel et PowerPoint avancé). De formation juridique supérieure (Bac +5) en Droit des Affaires. Au moins 5/7 ans d’expérience en entreprise ou en cabinet d’avocats. Le CRFPA est un plus. Une appétence pour le LegalOps est un plus. Anglais courant. L’espagnol est un plus. Faire comprendre un sujet complexe aux équipes en proposant des solutions concrètes. Être à l’écoute des besoins des équipes pour y répondre au mieux. Sens du service, Pragmatisme, Esprit de synthèse, Faire preuve de pédagogie, Proximité, être opérationnel, capacité à se plonger dans les détails de la réalité de chaque filiale, Adaptabilité, Curieux(se), Aisance rédactionnelle et orale.
Lieu de travail : 10 Avenue de l'Entreprise, 95800 Cergy, France
Langue / Niveau :
Français : D-Maitrise professionnelle complète
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-44569 - Juriste Senior Droit des Affaires Internationales & Compliance M/F

Wed, 02 Sep 2026 14:04:06 Z

Type de contrat : Durée indéterminée
Description du poste :
La finalité du poste est d’assurer la protection juridique de SPIE Global Services Energy lors de toutes les négociations de contrats que toutes nos filiales peuvent signer. Être un conseil, un expert au service des équipes opérationnelles et fonctionnelles pour définir ensemble la stratégie juridique pour préserver les intérêts de SPIE Global Services Energy. Accompagner les équipes dans le cadre de l’analyse, la négociation, l’exécution et la clôture des contrats en proposant des solutions pragmatiques et efficaces et ce, en garantissant le respect de nos procédures et des contextes réglementaires et législatifs applicables, en France et à l’international. Sur la partie compliance, être le relai en local auprès des équipes du déploiement du programme Compliance et spécifiquement, de lutte contre la corruption dans tous ses aspects. - Revoir, rédiger, qualifier une grande variété de contrats (MOU, accords de confidentialité, contrats de partenariats, contrats de services, contrats d'opération maintenance, projets clé en main) et participer à leurs négociations ; - Participer au suivi de l’exécution de certains contrats notamment via certains actes de contract management ; - Revoir et négocier les garanties maison-mère ; - Préparer la documentation juridique de réponses à des appels d’offres ; - Participer au processus de revue des risques en identifiant les risques juridiques et légaux et contractuels et fournir un support afin d’éviter ou de limiter ces risques, proposer des solutions innovantes aptes à réduire les risques ; - Apporter expertise et conseil en droit des affaires, tant en France qu’à l’international, aux clients internes basés en France et dans toutes nos filiales internationales ; - Proposer aux clients internes des schémas correspondant à leurs besoins ; - Suivre les contentieux et précontentieux nationaux/internationaux avec les avocats externes ; - Participer à la mise à jour et l’élaboration de modèles de clauses ou de contrats ; - Préparer des modules de formation interne sur des points de droits des affaires ; - Suivre les évolutions législatives et réglementaires applicables aux opérations ; Se faire le relai en local de la mise en œuvre de la gouvernance d’entreprise, des règles du code de conduite et de toutes les procédures éthiques applicables (rappel des règles, formation..).

Pack Office (Excel et PowerPoint avancé). De formation juridique supérieure (Bac +5) en Droit des Affaires. 7 ans et + d’expérience en entreprise ou en cabinet d’avocats. Le CRFPA est un plus. Des connaissances en Compliance sont un plus. Appétences pour le LegalOps est un plus. Anglais courant. L’espagnol est un plus. Faire comprendre un sujet complexe aux équipes en proposant des solutions concrètes. Être à l’écoute des besoins des équipes pour y répondre efficacement. Capacité à embarquer une équipe dans un projet donné. Capacité à endosser une mission transverse. Prise de recul/de hauteur sur les problématiques rencontrées. Force de proposition et innovation sur les réflexes juridiques à adopter. Sens du service. Pragmatisme, Esprit de synthèse avec maturité. Faire preuve de pédagogie. Proximité, être opérationnel, capacité à se plonger dans les détails de la réalité de chaque filiale. Adaptabilité. Curieux(se). Esprit d’équipe. Aisance rédactionnelle et orale.
Lieu de travail : 10 Avenue de l'Entreprise, 95800 Cergy, France
Langue / Niveau :
Français : D-Maitrise professionnelle complète
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43063 - Chef de Chantier Turbines

Wed, 22 Jul 2026 22:09:17 Z

Type de contrat : Durée indéterminée
Description du poste :
MISSIONS: Réaliser, organiser et suivre les chantiers de machines tournantes, turbines ou auxiliaires dans le respect en termes de coût, qualité, délai. Il supervise une équipe de chef d'équipe et/ou de monteur mécanicien. Prendre en charge le matériel o Réaliser/s’assurer/valider l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées o Identifier/s’assurer/valider les pièces et les sous-ensembles et de leur stockage approprié o S'assurer/valider que l'ensemble des pièces et sous-ensembles sont disponibles Démonter et expertiser o Réaliser/s’assurer/valider le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles o Réaliser/s’assurer/valider le nettoyage approprié des pièces et des sous-ensembles o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique / des jeux fonctionnels o Identifier/s’assurer/valider les pièces à réparer ou à remplacer o Renseigner le compte rendu d’évaluation et proposer au pilote de l’affaire réparations à effectuer. Remettre en état et remonter le matériel o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique des pièces neuves ou réparées o Réaliser/s’assurer/valider le contrôle des jeux fonctionnels en cours de remontage o Réaliser/s’assurer/valider les opérations d’ajustage / montage / les opérations simples de tuyauterie et chaudronnerie / les travaux par point chaud (soudure, montage par dilatation thermique…) Opérations de réglage (sur chantier) o Réaliser/s’assurer/valider les opérations de réglage (lignage des internes d’une turbine, alignement machines, pesage de corps,…) Traçabilité des opérations o Remplir/s’assurer/valider les feuilles de contrôle associés aux opérations de maintenance effectuées o Participer/rédiger/valider les divers rapports et procès-verbaux (partie constat au minimum) et le faire signer au client o Proposer des solutions au pilote d’affaire o Renseigner et valider le Plan Qualité Affaire et/ou gamme Piloter l’activité o Valider et signer le PDP o Signer le PV d'ouverture de chantier et envoyer au pilote* d'affaire o Veiller à l'exécution des travaux attribués par pilote* d’affaire conformément au planning o Informer quotidiennement le pilote* d’affaire de l'avancement du chantier et émettre des rapports journaliers.... Assister lors de la mise en service (sur chantier) Assurer la gestion et l’animation des ressources (moyens humains, matériel et technique)

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative Savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier.
Lieu de travail : LONS FRANCE
Langue / Niveau :
Français : E-Bilingue ou Langue Maternelle
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43647 - HSE Engineer Apprentice H/F

Wed, 08 Jul 2026 22:16:02 Z

Type de contrat : Contrat d'alternance
Description du poste :
Main Responsibilities - Collect, organise, and format HSSE data for dashboards and routine reporting. - Assist in preparing PowerPoint slides, charts, and visual materials. - Support communication activities (short videos, internal campaigns, safety moments). - Help maintain files, templates, and documentation. - Perform basic analysis, benchmarking, or research when needed. - Draft summaries or simple briefs based on provided information. - Provide support on preparatory tasks that are not yet shared with the wider team. - attend and eventually contribute to the HSE meeting with HSE Network in SPIE GSE. - Support preparation and follow up of HSE audits and Inspections; - Support the implementation of proactive indicator in GSE; - Support the implementation of a HSE reporting software.

Profile & Education - Engineering student (Bac+4/Bac+5) seeking a 1‑year internship. - Curious, reliable and able to work in a fast‑paced environment. - Interest in HSSE topics, industrial safety, energy sector, operations; - Data/visual and oral communication is a plus.
Lieu de travail : 10 Avenue de l'Entreprise, 95800 Cergy, France
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-43605 - INSTRUMENT SENIOR TECHNICIAN M/F

Fri, 05 Jun 2026 05:44:09 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE: · Ensures that COMPANY’s HSE rules and regulations are strictly observed, (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during the performance of maintenance operations placed under his/her responsibility. · Establishes and maintains a strong safety culture in line with TotalEnergies’ HSE requirements and rules. · Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (If required) · Update his technical documentation. · Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about any HSE issues and proposing corrective solutions. · Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause Failure Analyses, Process Incidents audits and other activities as required; Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) · Ensure validity of work permit relevant to the work scope before handling a task. · Checks and verifies that mandatory aspects (including those concerning local law scenarios) are properly implemented for all activities conducted, METHODS · Contribute to relevant kick of meeting related to maintenance operation. · Keeps a critical eye on current preventive maintenance programs and, suggests improvements if required, · Identifies recurrent corrective maintenance interventions, analyses them, and suggests improvements, OPERATION · Organises and performs on site the maintenance operations which are placed under his/her responsibility, · With his/her teams, assists specialists working under Specific Maintenance Contracts (SMC), · Monitors the functioning of systems placed under his/her responsibility, · Ensures that the transfer of knowledge by mentoring occurs properly within his/her teams, and actively · Manages the team of technicians directly under his/her responsibility, · Performs any intervention within his/her field of competence at the request of the CSR. · Takes in charge the systems under his/her responsibility in case of breakdown, until correct operation status resumes. INSTRUMENT SENIOR TECHNICIAN SPECIFIC · Must have advanced technical knowledge of all types of Instrumentation, Process Control, Fiscal Oil & Gas Metering, Fire & Gas and ESD safety systems. · In addition to the duties of an Instrument technician, is also responsible for Level 1,2,3 servicing, maintenance and testing of the above equipment as per the CMIMS – UNSIOL system. · DUCSAT offshore operations are normally 24hr. Day shift 12 hours / Nightshift 12 hours to maximise ‘tool time’.

A basic knowledge of the process of oil and gas operations & installations and a thorough knowledge of the equipment used in oil and gas operations & installations. The Ability to lead and motivate multi-national teams. Pride in his/her work, ability to maintain good relations with colleagues and others. Physically ability to work on offshore installations in the climatic conditions of the site. He/she must have proven ability as a leader of small teams. Perfectly competent and independent in his/her field, he/she must show common sense and organisational ability. Natural authority, founded on his/her abilities and on the trust he/she has in his/her teams, is essential
Lieu de travail : Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43599 - ELECTRICAL TECHNICIAN M/F

Thu, 04 Jun 2026 14:30:27 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE: Ensure HSE policy fulfillment during his activities. Establishes and maintain a strong safety culture in line with TotalEnergies’ HSE requirements and rules. Complies with HSE Legislation (Occupational and process), TotalEnergies’ standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude. Complies with Operating Procedures and Guidelines with the asset to ensure process safety, operational safety, and plan integrity. Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specifics ones (If required) Report anomalies, accidents, near misses Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) Check validity of work permit relevant to work scope before handling a task. Checks and verifies that mandatory aspects (including those concerning local law scenario) Participate to safety talk before and after intervention. Participate to key procedure audits And for Electricity in particular: Knowledge of electrical Certification requirements and be certified as required. Be aware of permit to work and electrical isolations requirements. Be aware of gas test requirement. Understand hazards associated to leak tests and hydrotests. THEORICAL KNOWLEDGE Have a basic understanding of facilities/process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia…). Understanding and use of basic laws and units of physic (resistance, inductance, DC & AC current and voltage, frequency, active and reactive power…). Be able to differentiate low and high voltages. Possess notions on cable sizing and voltage dropping. Be able familiar with a general facilities electrical network philosophy Have a basic understanding of inter-tripping and interlocking action, load shedding and load sharing modes. For electrician technicians only, have a basic understating of cathodic protection system. Understand working principle of main electrical equipment For those, be aware of their preventive maintenance requirements. Be aware of CBM (thermography) requirement and purpose. Understand principles and know the different systems of earthing Understand preventive, corrective maintenance and maintenance plan concepts. OPERATION Be able to maintain and troubleshoot small electrical installation like lighting and heat tracing circuit. Be able to identify the different types of cables (including ground ones) connect those properly (using lugs) and perform their proper laying Be able to do preventive maintenance on non-critical equipment LV Electrical equipment: - Be able to dismantle, replace defective parts, reassemble, reconnect, and check the system. - Identify all accessories - Identify correctly for other people risks generated by his activity.

Perfectly competent and independent in his field specially: Must show common sense, organization ability and responsibility. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Rigorous and methodical in his approach to operation and able to anticipate and analyze situation. Able to complete mechanical preventive and corrective maintenance according to planning and instructions.
Lieu de travail : OFFSHORE
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43593 - CRANE PREPARATION ENGINEER (onshore) M/F

Thu, 04 Jun 2026 12:35:36 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Gives his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all Cranes subject under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs’, Preparations, Backlog Control Planning and Equipment availability/reliability • Take charge of Cranes Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations and planning. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved Crane WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Mechanical Preparations – Team Lead for clarifications where required.

Technical Preparation and Site Support
Lieu de travail : Kanalen 1, 6700 Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43592 - INSTRUMENTATION PREPARATOR (Onshore) M/F

Thu, 04 Jun 2026 12:33:30 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all INSTRUMENT & TELECOMMS Preparations subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to Client’s Company rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability Take charge of Work Orders under His/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the TEPDK to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Technical Preparations and Site Support
Lieu de travail : Kanalen 1, 6700 Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43591 - INSTRUMENTATION ENGINEER (onshore) M/F

Thu, 04 Jun 2026 12:31:54 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all INSTRUMENT & TELECOMMS Preparations subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to Client’s Company rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability • Take charge of Work Orders under His/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the TEPDK to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required

Experience in INSTRUMENT/TELECOMMS Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), Evision permit Systems and other Preparations, Tools/Resources.
Lieu de travail : Kanalen 1, 6700 Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43590 - ELECTRICAL/HVAC TECHNICIAN (onshore) M/F

Thu, 04 Jun 2026 12:30:14 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all ELECTRICAL & HVAC preparation subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability. Take charge of Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparation standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Experience in ELECTRICAL Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), E-vision permit Systems and other Preparations, Tools/Resources.
Lieu de travail : Kanalen 1, 6700 Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43452 - ELECTRICAL REFERENT M/F

Thu, 28 May 2026 13:32:11 Z

Type de contrat : Durée indéterminée
Description du poste :
GENERAL DESCRIPTION: • The Electrical Referent is the technical and compliance authority for all electrical activities within the scope of the contract. • He/she is responsible for ensuring that all electrical works are executed in full compliance with: • Client electrical procedures and requirements • NorSPIE electrical safety rules and standards • Applicable contractual, regulatory, and statutory obligations • The Electrical Referent shall ensure that electrical safety, control of work, and isolation rules are applied rigorously and without deviation. HSEQ: • Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules. • Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. • Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity. • The Electrical Referent is responsible for ensuring that electrical training and authorization systems are: • Audit-ready at all times • Compliant with client and company requirements • Robust enough to withstand regulatory inspections and incident investigations • He/she shall actively prevent any non-compliant practice that could expose NorSPIE to: • Legal liability • Contractual penalties • Electrical safety incidents Participates in the continuous improvement of NorSPIE Integrated Management System: • Leads or participates in Root Cause Analyses (RCA) following HSE incidents or Quality non-conformities and ensures effective implementation and follow-up of all corrective and preventive actions. • Maintains and updates all documents within his/her area of responsibility. MAIN FUNCTIONS: • The Electrical Referent shall ensure that electrical competence is: • Verified prior to authorization. • Maintained throughout the assignment. • Fully documented and traceable. • Where personnel are authorized with restricted electrical scopes (e.g. isolation only, no electrical work), such limitations shall be: • Explicitly defined • Formally recorded • Clearly communicated • The Electrical Referent shall ensure alignment between: • Contractual Training matrix • Authorization systems • Actual tasks performed in the field

Strong understanding of electrical safety principles. Proven ability to operate within regulated and safety-critical environments. Demonstrated rigor, methodical approach, and sense of responsibility when managing electrical activities. Natural authority based on technical competence and trust Ability to anticipate, analyze, and manage technical risks Ability to work efficiently in a multinational and service-oriented environment Autonomous, rigorous, and reliable
Lieu de travail : Kanalen 1, 6700 Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43451 - ASSET TECHNICAL LEAD (Onshore) M/F

Thu, 28 May 2026 13:27:51 Z

Type de contrat : Durée indéterminée
Description du poste :
GENERAL DESCRIPTION: The Asset Technical Lead is responsible for the management and co-ordination of onshore preparation for his/her asset: • Short and medium-term improvement methods. • Planning and scheduling of his/her asset. • Support of offshore operations. • Participate to the definition of long-term maintenance planning (it includes time schedule and resources definition) of his/her asset. • Management and co-ordination with the support of the SAS Manager: o Cranes and safety equipment preparation team. o CBM team. o PSV Workshop. • Directly liaise with SAS manager and offshore management. • Directly liaise with TEPDK method department. HSEQ: • Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSEQ Requirements and Rules. • Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. • Ensures compliance with Operating Procedures & Guidelines with the assets to ensure Process Safety, Operational Safety and Plan Integrity. Participates in the continuous improvement of NorSPIE Integrated Management System: • Leads or participates in Root Cause Analyses (RCA) following HSE incidents or Quality non-conformities and ensures effective implementation and follow-up of all corrective and preventive actions. • Maintains and updates all documents within his/her area of responsibility. MAIN FUNCTIONS: • Coordinate all the activities related to offshore assistance of his asset. • Responsible of the Short-term planning of his asset. • Ensure the preparation is done in due time, in line with priority and site requirement. • Ensure all the means are available to guarantee offshore maintenance operations (Logistic, material, human) of his asset. • Ensure daily and weekly meetings with respective teams. • Ensure that GMC backlog of his/her asset is under control and well managed. • Coordinate with other operating entities (TEPDK / FMC / Vendors)

Polyvalent and experienced in maintenance activities, logistics, mechanics, electricity, instrumentation, in the oil and gas industry. Must show common sense, organization ability, responsibility, and autonomy. Pride in his/her work, ability to maintain good relations with colleagues and others. Ability to work in a multinational team. Ability to work in a service relationship. Proven sense of responsibility and autonomy Rigorous and methodical in his/her approach to operations. Able to anticipate and analyze. Proven ability as a leader of dedicated teams. Natural authority, founded on his/her abilities and on the trust he/she has in his/her teams, is essential.
Lieu de travail : Kanalen 1, 6700 Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43449 - PLANNER (Onshore) M/F

Thu, 28 May 2026 13:24:38 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Contributes to ensuring that TEPDK and NorSPIE’s QHSE regulations are considered during planning as well as approved operating procedures and standard industry practices. Gives his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. Take particular attention to the planning linked to the SECE equipment. GENERAL DESCRIPTION: • Responsible to plan and schedule (2 weeks, 5 weeks and 4 months look ahead) all activities under GMC activities in SAP tacking into account readiness (material, resources, support required from other stakeholders) • Ensure conformance to Client’s Company rules, best standards, and general legislations. MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs’, Preparations, Backlog Control Planning and Equipment availability/reliability. • Respect all processes and procedure (GMC and TEPDK) in place. • Ensuring planned jobs are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS/SAP for execution at site and work location. • Ensuring allocation of resources for the execution of planned jobs • Coordinate meetings with offshore stakeholders for review of draft plan, follow up on site feedbacks and make necessary adjustment before plan is frozen for offshore execution. • Follow up with offshore to ensure clean-up on SAP, of all planned and completed jobs. • Ensure 2 weeks is following the principal schedule, taking into account Vital equipment list, Smart Room request, Team Lead and offshore request. Scheduling principles (Campaign and SD’s excluded) • Interacts with other functional planners (maintenance, FMC, Well Services, Projects, etc.) and IOP planner to optimize interrelated activities. • Executes regular reviews of backlog of planned work to reduce as much as possible (especially the SECE). • Facilitate follow-up of non-executed jobs to ensure additional preparation of the WOs is done. • Coordinate shutdown and campaign: creation and follow-up of readiness tracker (list of WOs, opportunities jobs, materials follow-up, and reporting), ensure to give status during regular meeting with all different stakeholders. Creation of the execution plan (MS Project) and create progress report. • Communication with onshore material coordinators (GMC & TEPDK) regarding shipping of materials and create break-ins as required.

Maintenance Planner (Short and Medium Term)
Lieu de travail : Kanalen 1, 6700 Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43448 - COMPETENCE OFFICER (Onshore) M/F

Thu, 28 May 2026 13:19:45 Z

Type de contrat : Durée indéterminée
Description du poste :
GENERAL DESCRIPTION: The Competence Officer ensures that offshore and onshore service delivery is continuously supported by a capable, compliant, and well-prepared workforce. The competence officer is accountable for: Translating operational requirements into competence needs. Support offshore and onshore service delivery by ensuring personnel are: Adequately skilled. Technically and operationally competent. Interface effectively with operations and Support Services Manager to ensure technical readiness of the GMC personnel. The Competence Officer works in close coordination with: HR recruitment team from both mothers companies. CSR. Support Service Manager / GMC management. HSEQ: Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSEQ Requirements and Rules. Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. Ensures compliance with Operating Procedures & Guidelines with the assets to ensure Process Safety, Operational Safety and Plan Integrity. Participates in the continuous improvement of NorSPIE Integrated Management System: Participates in Root Cause Analyses (RCA) following HSE incidents or Quality non‑conformities. Maintains and updates all documents within his/her area of responsibility. Maintain operational readiness documentation and support audits/assessments related to competence management system.

Professionally experienced in operations, with strong technical background for competence management in offshore industrial contexts.
Lieu de travail : Kanalen 1, 6700 Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43446 - MECHANICAL SUPERVISOR M/F

Thu, 28 May 2026 13:02:42 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE: Ensure HSE policy fulfillment during his activities. Establishes and maintain a strong safety culture in line with Company HSE requirements and rules. Is responsible to ensures compliance with HSE Legislation (Occupational and process), Company standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude. Ensure compliance with Operating Procedures and Guidelines with the asset to ensure process safety, operational safety, and plan integrity. Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specifics ones (If required) Give his contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his hierarchy about HSE issue and proposing corrective solutions. Participate in record process (fulfillment and keeping) Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) Ensure validity of work permit relevant to work scope before handling a task. Checks and verifies that mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out, Participate to safety talk before and after intervention. Participate to key procedure audits OPERATION Organises on site the maintenance operations which are placed under his responsibility, and specially: - Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures. - Ensure the quality of his teams’ interventions by frequent on-site checks, - Ensures that TotalEnergies’ HSE regulations are respected (especially procedures related to Work Permits) - With his teams assists specialists working under Specific Maintenance Contracts (SMC), Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Carries out, at the CSR request, any intervention within his field of competence. Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Identifies recurrent corrective maintenance interventions, analyses them, and suggests improvements, Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications.

He is responsible for maintenance operations within his field of competence. He ensures that maintenance operations under his responsibility are carried out in strict accordance with TotalEnergies’ current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by NorSpie. He guarantees a good level of availability of the equipment he is responsible for on production sites. He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Ability to lead and motivate multi-national team. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent and independent in his field, must show common sense, organization ability and responsibility. Must have a proven sense of responsibility. Rigorous and methodical in his approach to operation in particular handling operation Must be able to anticipate and analyze situation. Must have proven ability as a leader of dedicated teams. Natural authority, founded on his abilities and on the trust, he has in his team, is essential. Play a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
Lieu de travail : Esbjerg Kanalen 1
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle